Volvo S80 T5

Spare parts and drivetrain components for the Volvo S80 T5. Select your make, model and engine to ensure a correct fit before ordering.

Products for Volvo S80 T5

35 products
1 - 24 of 35
Item no.:637358
  • Position: Rear
Item no.:650157
  • Position: Rear, Outer
  • Seal diameter: 56 mm
  • Inner splines: 29
  • Diameter: 56 mm
  • ABS teeth: 88
Item no.:0588191
  • Position: Outer
  • Seal diameter: 58 mm
  • Inner splines: 28
  • Outer splines: 40
  • Joint diameter: 92 mm
Item no.:2100515
  • Position: Front right
  • Total length: 953 mm
  • Splines gearbox side: 26
  • Splines wheel side: 40
Item no.:2140481
  • Position: Front right
  • Total length: 952 mm
  • Splines gearbox side: 28
  • Splines wheel side: 40
Item no.:2189092
  • Position: Front right
  • Total length: 952 mm
  • Splines gearbox side: 26
  • Splines wheel side: 40
Item no.:2105889
  • Position: Front right
  • Total length: 952 mm
  • Splines gearbox side: 28
  • Splines wheel side: 40
Item no.:0422853
  • Position: Inner
Item no.:1145874
  • Position: Front left
  • Total length: 604 mm
  • Splines gearbox side: 26
  • Splines wheel side: 40
Item no.:1104212
  • Position: Front left
  • Total length: 594 mm
  • Splines gearbox side: 28
  • Splines wheel side: 40
Item no.:142194
  • Position: Front left, Inner
  • Seal diameter: 31 mm
  • Inner splines: 26
  • Diameter: 31 mm
  • Splines gearbox side: 26
Item no.:645875
  • Position: Rear, Inner
  • Seal diameter: 35 mm
  • Inner splines: 29
  • Diameter: 35 mm
  • Splines gearbox side: 26
Item no.:243278
  • Position: Front right, Inner
  • Inner splines: 27
  • Total length: 548 mm
  • Splines wheel side: 28
Item no.:1143567
  • Position: Front left
  • Total length: 576 mm
  • Splines gearbox side: 31
  • Splines wheel side: 40
Item no.:2142811
  • Position: Front right
  • Total length: 954 mm
  • Splines gearbox side: 28
  • Splines wheel side: 40
Item no.:0570233
  • Position: Outer
  • Seal diameter: 57 mm
  • Inner splines: 27
  • Outer splines: 40
  • Joint diameter: 100 mm
Item no.:142450
  • Position: Front left, Inner
  • Total length: 162 mm
Item no.:216478
  • Position: Front right
  • Total length: 947 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
Item no.:217636
  • Total length: 1,002 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
Item no.:114171
  • Position: Front left
  • Total length: 604 mm
  • Splines gearbox side: 26
  • Splines wheel side: 40
Item no.:2164314
  • Position: Front right
  • Total length: 952 mm
  • Splines gearbox side: 26
  • Splines wheel side: 40
Item no.:0534976
  • Position: Outer
  • Inner splines: 26
  • Outer diameter: 91 mm
  • Splines wheel side: 40
Item no.:632934
  • Position: Rear
Item no.:656251
  • Position: Rear, Outer
  • Seal diameter: 56 mm
  • Inner splines: 29
  • Diameter: 56 mm
  • ABS teeth: 88
Showing 1–24 of 35 products

Volvo S80 T5 drivetrain

The Volvo S80 T5 is a saloon that combines Scandinavian luxury with a potent turbocharged engine, placing distinct demands on the vehicle's drivetrain. The transmission and drive components form the critical link between engine output and the road surface, and for a T5 variant, the mechanical loads are often noticeably higher than on standard models. Maintaining the drivetrain with the correct components is vital for preserving the car's dynamic handling and safety. With us, you will find an extensive range covering everything from complete drive shafts to specific inner and outer CV joints. Choosing components precisely calibrated for your Volvo S80 T5 ensures that torque is handled efficiently without causing premature wear to other sections of the power transmission. We focus on providing solutions that meet or exceed original equipment specifications, giving you complete confidence behind the wheel for many kilometres to come.

How the drivetrain is engineered on the Volvo S80 T5

The drivetrain on a Volvo S80 T5 is engineered to handle front-wheel drive alongside substantial torque from the turbocharged five-cylinder engine. The system relies on a transverse engine layout where power is transferred via the gearbox to two drive shafts of differing lengths. This asymmetric setup demands premium-grade components to minimise torque steer and ensure balanced power distribution during acceleration. Each drive shaft for the Volvo S80 T5 is fitted with an inner and an outer CV joint that together accommodate both suspension travel and steering articulation. The inner joint is typically a tripod design to absorb axial plunge, whilst the outer joint uses a Rzeppa design to handle the large steering angles required at the front wheels. Understanding this mechanical setup is key to diagnosing why certain parts experience higher wear rates under demanding driving conditions.

Common faults and symptoms

There are several clear indicators that the drivetrain in your Volvo S80 T5 is developing wear. One of the most typical symptoms is a clicking or knocking sound on full lock at lower speeds, which almost invariably points towards a worn outer CV joint. If you experience vibrations through the steering wheel or chassis under hard acceleration, the fault can often be traced back to an inner constant velocity joint or an imbalance in the drive shaft itself. It is equally important to inspect the CV boots regularly; a split boot allows lubricating grease to escape and road dirt to enter, ruining the joint in very short order. Addressing these symptoms promptly helps you avoid more extensive repairs and keeps your Volvo driving safely under all European road conditions.

Common parts to replace on the Volvo S80 T5

For the Volvo S80 T5, we have identified several critical components that frequently require renewal to maintain peak performance. Our range currently covers 13 specific items for this model variant. The most sought-after components are complete drive shafts, as these offer a comprehensive solution that saves significant workshop fitting time. We stock 8 different driveshaft options to cover varying model years and gearbox types. In addition, we supply 4 types of outer CV joints and 1 specific inner CV joint. Replacing an entire drive shaft is often the most economical approach over time, as you receive new inner and outer joints alongside factory-fitted CV boots in one single unit. This prevents worn adjacent components from causing premature failure in freshly fitted parts—especially important for the performance-focused T5.

How to find the right part for your Volvo S80 T5

Explore the relevant product categories for your Volvo S80 T5:

When troubleshooting driveline issues, narrowing down the right category straight away saves valuable time. By comparing the exact sections for the Volvo S80 T5, it becomes simpler to distinguish between drive shaft, CV joint, or prop shaft faults and to proceed to the catalogue page matching your car's symptoms and specifications.

We always recommend cross-referencing specifications against your existing part, but our fitment guarantee ensures you can order with absolute peace of mind. Should you need guidance, our technical team is ready to help you navigate our comprehensive selection of driveline parts for the Volvo S80.

Why shop with CVJoint24

CVJoint24 is not just an ordinary car parts retailer; we are your dedicated Swedish driveline specialist, dispatching orders across the EU from our central warehouse in Helsingborg, Sweden. With a steadfast focus on build quality and technical know-how, we have curated an expert range built specifically for robust European driving conditions. When ordering through our shop, you benefit from our fitment guarantee whenever you select your car by make, model, and engine variant. We understand the need to get your car back on the road without delay, which is why we offer rapid dispatch on our extensive stock. Combining deep technical understanding with efficient distribution, we ensure you always receive the right part. Choose a specialist that understands your Volvo S80 T5 in detail—choose CVJoint24 for a seamless shopping experience and a drivetrain in prime condition.

Frequently Asked Questions about Drivetrain for Volvo S80 T5

How do I know if my Volvo S80 T5 needs a new drive shaft?

The most common signs are vibrations in the car under acceleration or a clicking noise when cornering. If the CV boot is split and the grease has leaked out, there is a high risk that the shaft or joint needs replacing.

Do all Volvo S80 drive shafts fit a T5 model?

No, the T5 model often features heavier-duty dimensions and specific splines to cope with the higher torque. Always select your car's make, model and engine to ensure the correct fitment.

What is included when I buy an outer CV joint for my S80 T5?

Our CV joint kits are supplied complete with the joint itself, a model-specific CV boot, high-quality grease, circlips and the necessary fitting clamps.

Can I replace just the inner CV joint on my Volvo S80 T5?

Yes, we supply standalone inner CV joints. However, it is often more time-efficient to replace the complete drive shaft if the car has covered high mileage, as the outer joint and the shaft's balance may also be affected.

Why is it important to replace a damaged CV boot immediately?

The CV boot protects the CV joint from dirt and water while keeping the lubricating grease in place. A damaged boot quickly causes premature wear to the joint due to contamination.

Do you offer a fitment guarantee on Volvo driveline parts?

Yes, when you select your vehicle's make, model and engine on cvjoint24.com, your purchase is backed by our fitment guarantee, giving you complete peace of mind that you receive the correct part for your specific Volvo S80 T5.