Volvo V40 1.8 I

Spare parts and drivetrain components for the Volvo V40 1.8 I. Check vehicle fitment by make, model and engine before ordering.

Products for Volvo V40 1.8 I

85 products
49 - 72 of 85
Item no.:354944
  • Position: Front, Outer
  • Inner splines: 28
  • Seal diameter: 58 mm
  • Outer splines: 40
  • Thread size: M10x1,5
Item no.:0678847
  • Total length: 138 mm
Item no.:249173
  • Position: Front right, Inner
  • Inner splines: 26
  • Seal diameter: 44 mm
  • Joint diameter: 86 mm
  • Outer splines: 39
Item no.:0648734
  • Total length: 113 mm
Item no.:141366
  • Position: Front left, Inner
  • Inner splines: 23
  • Seal diameter: 40 mm
  • Total length: 168 mm
  • Joint diameter: 79 mm
Item no.:0606992
  • Total length: 100 mm
Item no.:3560243
  • Position: Front, Outer
  • Inner splines: 27
  • Seal diameter: 56 mm
  • Outer splines: 36
  • ABS teeth: 48
Item no.:3509806
  • Position: Front, Outer
  • Inner splines: 28
  • Seal diameter: 57 mm
  • Outer splines: 40
  • ABS teeth: 48
Item no.:3520583
  • Position: Front, Outer
  • Inner splines: 26
  • Seal diameter: 56 mm
  • Outer splines: 36
  • Thread size: M10X1,5
Item no.:0670971
  • Total length: 113 mm
Item no.:1190883
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 36
  • Total length: 535 mm
Item no.:241144
  • Position: Front right, Inner
  • Inner splines: 26
  • Seal diameter: 28 mm
  • Joint diameter: 86 mm
  • Outer splines: 26
Item no.:242250
  • Position: Front right, Inner
  • Inner splines: 26
  • Seal diameter: 33 mm
  • Total length: 620 mm
  • Joint diameter: 85 mm
Item no.:246186
  • Position: Front right, Inner
  • Inner splines: 24
  • Splines gearbox side: 26
  • Seal diameter: 31 mm
  • Outer diameter: 82 mm
Item no.:0976522
  • Inner diameter: 38 mm
  • Outer diameter: 63 mm
Item no.:242941
  • Position: Front right, Inner
  • Inner splines: 27
  • Splines gearbox side: 28
  • Seal diameter: 30 mm
  • Outer diameter: 94 mm
Item no.:3529611
  • Position: Front, Outer
  • Inner splines: 24
  • Splines wheel side: 36
  • Seal diameter: 54 mm
  • Outer diameter: 84 mm
Item no.:0665259
  • Total length: 92 mm
Item no.:3511031
  • Position: Front, Outer
  • Inner splines: 27
  • Seal diameter: 56 mm
  • Outer splines: 40
  • ABS teeth: 48
Item no.:0919533
  • Inner diameter: 27 mm
  • Outer diameter: 56 mm
Item no.:143942
  • Position: Front left, Inner
  • Inner splines: 24
  • Seal diameter: 31 mm
  • Joint diameter: 82 mm
  • Outer splines: 26
Showing 49–72 of 85 products

Drivetrain for Volvo V40 1.8 I

The Volvo V40 1.8 I is a classic model that demands precision when maintaining its power transmission. The drivetrain on this specific engine variant is engineered to handle engine torque and power output efficiently, but its components naturally suffer wear over time. Choosing the right spare parts is vital to preserve the car's reliability and driving comfort. At CVJoint24, we specialise in these exact components so you can rely on your car performing at its best in all driving conditions.

Our range for the Volvo V40 1.8 I covers everything from complete drive shafts to specific components such as ABS rings and outer CV joints. Because the 1.8 I engine has its own technical specifications, it is crucial not just to pick a part that looks right, but one that is technically verified for this exact variant. We work exclusively with manufacturers who meet high standards, enabling us to supply parts that match or exceed original equipment quality in durability and fit.

How the drivetrain is designed on the Volvo V40 1.8 I

The drivetrain on a Volvo V40 1.8 I uses a front-wheel-drive layout where power travels from the transverse engine through the gearbox out to the front wheels. At the heart of this system sit the drive shafts, which transfer rotational energy while accommodating suspension travel and steering angles. Each drive shaft features two joints: an inner CV joint by the gearbox and an outer constant velocity joint at the wheel. The outer joint is especially critical, as it must cope with wide angles when steering.

Alongside the mechanical shafts, the ABS ring plays a vital role in vehicle safety. Mounted on the outer CV joint, it sends wheel speed signals to the car's ABS sensors. On the Volvo V40 1.8 I, these components must work together seamlessly. A correctly functioning drivetrain ensures quieter running as well as reliable operation of your stability and braking systems. Understanding this layout makes it simpler to diagnose where an issue originates and which part needs replacing.

Common faults and symptoms

Several clear warning signs indicate drivetrain wear on your Volvo V40 1.8 I. One of the most frequent symptoms is a clicking or knocking sound when turning on full lock, such as when parking or negotiating tight junctions. This typically points to a failing outer CV joint on your Volvo V40 1.8 I, often caused by a split CV boot that has allowed dirt in and grease out.

Another common issue is vibration through the steering wheel or the entire car under acceleration. This can often be traced back to an imbalanced driveshaft or play in the inner CV joint. If you also notice the ABS triggering needlessly at low speeds, or the ABS warning light illuminating on the dashboard, a cracked or corroded ABS ring is the likely culprit. As many Volvo V40 1.8 I cars face harsh European winters, corrosion on reluctor rings is a known problem that demands attention to keep your braking safe.

Common parts to replace on the Volvo V40 1.8 I

When repairs are due, we at CVJoint24 organise our catalogue into clear categories to make your search straightforward. For the Volvo V40 1.8 I, our products are grouped into these common replacement areas:

  • Drive shafts for Volvo V40 1.8 I – We stock several variants to cover both offside and nearside fitments across different gearbox types.
  • Outer CV joints for Volvo V40 1.8 I – Specific replacement joints to eliminate knocking noises when cornering.
  • ABS rings for Volvo V40 1.8 I – We offer 4 different rings to ensure your braking system receives accurate wheel speed data.

Replacing an entire drive shaft is often more cost-effective than changing an individual joint, particularly on high-mileage cars. It saves fitting time in the garage and provides a brand-new assembly from the gearbox to the wheel hub. However, if the fault is isolated purely to the ABS signal, renewing just the reluctor ring is an economical way to clear warning lights and restore correct function.

How to find the right part for your Volvo V40 1.8 I

Navigate to the correct section for your Volvo V40 1.8 I:

On a car with several possible driveline issues, starting in the right category saves time. Comparing the specific component sections for the Volvo V40 1.8 I helps you distinguish between drive shaft, CV joint or propeller shaft issues and proceed directly to the page matching your symptoms and specifications.

Finding the right component for your Volvo V40 1.8 I is straightforward. The most reliable method is to select your vehicle's make, model and engine variant in our store selector. Filtering by your exact car configuration reveals parts that are technically compatible. This is particularly important for Volvo models, where specifications can vary by production year or equipment trim.

Once you have your results, we recommend checking key technical details such as tooth counts on ABS rings or driveshaft lengths if multiple versions are listed. We strive to provide comprehensive specifications for every product. If you need guidance, our team is on hand to help you get the correct part first time. Measuring your old component before ordering provides extra reassurance, ensuring your repair goes ahead without delay.

Why shop at CVJoint24

As a Swedish driveline specialist shipping across Europe, we combine in-depth technical knowledge with high service standards. When a drivetrain part fails, you need a dependable, premium replacement without delay. Our exclusive focus on drivelines allows us to provide technical expertise that general car-parts factors rarely match.

Shopping with us ensures you receive the correct part every time, backed by rigorous quality checks. We understand that your Volvo V40 1.8 I deserves durable components, so we never compromise on build quality. Choosing CVJoint24 gives you a trusted partner throughout the buying process, from part identification to delivery at your door. Experience the advantage of dealing with a genuine driveline specialist and keep your Volvo running smoothly for many kilometres to come.

Frequently asked questions about drivetrain parts for Volvo V40 1.8 I

How do I know whether I need to replace the entire drive shaft or just the CV joint on my Volvo V40 1.8 I?

If you only hear knocking or clicking noises when turning, it is usually the outer CV joint that is worn. However, if you experience vibrations during acceleration, the issue is often with the inner joint or the shaft itself, making it best to replace the complete drive shaft.

Do all Volvo V40 drive shafts fit my 1.8 I model?

No, drive shafts vary depending on the engine variant, gearbox (manual or automatic), and model year. Always select your specific vehicle details, including make, model, and engine variant, to find the correct part for your 1.8 I.

Why is the ABS warning light on in my Volvo V40 1.8 I?

A very common fault on this model is a cracked ABS ring on the drive shaft caused by corrosion. This disrupts the signal to the wheel speed sensor and triggers the warning light.

Is it difficult to replace an ABS ring yourself?

It requires removing the CV joint from the wheel hub. For a DIY mechanic with some car repair experience, it is entirely manageable, but it requires the right tools and precision when fitting the new ring.

What are the symptoms of a split CV boot on a Volvo V40?

A split CV boot typically flings grease onto the inside of the wheel rim or around brake components. If it is not replaced in time, dirt enters the constant velocity joint, rapidly leading to premature wear and knocking noises.

Do you offer a fitment guarantee on parts for Volvo V40 1.8 I?

Yes, we offer a fitment guarantee when you choose your specific make, model, and engine, meaning we ensure the part is intended for your exact car.