Volvo V40 T3 Gtdi
Car parts and drivetrain components for Volvo V40 T3 Gtdi. Always check the fit before ordering.
Products for Volvo V40 T3 Gtdi
- Position: Outer
- Seal diameter: 56 mm
- Inner splines: 26
- Outer splines: 36
- Joint diameter: 90,9 mm
- Position: Outer
- Seal diameter: 56 mm
- Inner splines: 24
- Outer splines: 36
- Position: Front left
- Total length: 520 mm
- Splines gearbox side: 26
- Splines wheel side: 36
- Position: Front right
- Total length: 947 mm
- Splines gearbox side: 26
- Splines wheel side: 36
- Position: Front right
- Total length: 917 mm
- Splines gearbox side: 26
- Splines wheel side: 36
- Position: Front left
- Total length: 580 mm
- Splines gearbox side: 26
- Splines wheel side: 36
- Position: Front left, Inner
- Seal diameter: 31 mm
- Inner splines: 26
- Diameter: 31 mm
- Splines gearbox side: 26
- Position: Rear, Inner
- Seal diameter: 35 mm
- Inner splines: 29
- Diameter: 35 mm
- Splines gearbox side: 26
- Position: Front left, Inner
- Seal diameter: 36 mm
- Inner splines: 27
- Diameter: 36 mm
- Splines gearbox side: 31
- Position: Front right, Inner
- Seal diameter: 40 mm
- Inner splines: 24
- Diameter: 40 mm
- Splines gearbox side: 26
- Position: Front left, Inner
- Seal diameter: 31 mm
- Inner splines: 24
- Diameter: 31 mm
- Splines gearbox side: 26
- Position: Rear, Outer
- Seal diameter: 56 mm
- Inner splines: 29
- Diameter: 56 mm
- ABS teeth: 88
- Total length: 1,002 mm
- Splines gearbox side: 26
- Splines wheel side: 36
- Total length: 582 mm
- Splines gearbox side: 26
- Splines wheel side: 36
- Position: Front right
- Total length: 920 mm
- Splines gearbox side: 26
- Splines wheel side: 36
Frequently Asked Questions about Drivetrain for Volvo V40 T3 Gtdi
How do I know if my Volvo V40 T3 Gtdi needs a new drive shaft?
The most common signs are pronounced vibrations through the steering wheel or floor under acceleration, as well as abnormal noises. If the vibrations disappear when you lift off the accelerator, it is a strong indication that an inner CV joint or the drive shaft itself is worn.
Do all Volvo V40 drive shafts fit the T3 Gtdi model?
No, it is essential to choose parts specifically designed for the T3 Gtdi. Differences in gearbox type and engine power mean that drive shaft lengths and splines can vary. Always select your specific make, model and engine to ensure the correct fit.
What causes a clicking noise on full steering lock?
This is almost always caused by a worn outer CV joint. When the bearings inside the joint wear down, play develops, producing that characteristic clicking sound whenever the wheel turns and rotates simultaneously.
Are the CV boot and grease included when I buy an outer CV joint?
Yes, when you buy an outer CV joint from us, it is supplied as a complete kit including a CV boot, high-performance grease, clamps and any required centre bolt or nut to make installation straightforward.
How does your fitment guarantee work for the Volvo V40?
Our fitment guarantee means that when you select your vehicle's make, model and engine and order the recommended part, we guarantee that it will fit your car. This gives you complete peace of mind with your purchase.
Can I replace just the CV boot if the joint still seems fine?
Yes, if you catch a split or damaged CV boot early before road grit has entered or the grease has completely escaped, replacing just the boot is often sufficient. It is a cost-effective way to extend the lifespan of your CV joint.