Volvo V40 T5

Spare parts and drivetrain components for the Volvo V40 T5. Check fitment by make, model and engine before ordering.

Products for Volvo V40 T5

36 products
1 - 24 of 36
Item no.:0581604
  • Position: Outer
  • Seal diameter: 56 mm
  • Inner splines: 26
  • Outer splines: 36
Item no.:631305
  • Position: Rear
Item no.:143884
  • Position: Front left, Inner
  • Seal diameter: 31 mm
  • Inner splines: 26
  • Diameter: 31 mm
  • Splines gearbox side: 26
Item no.:644036
  • Position: Rear, Inner
  • Seal diameter: 35 mm
  • Inner splines: 29
  • Diameter: 35 mm
  • Splines gearbox side: 26
Item no.:145254
  • Position: Front left, Inner
  • Seal diameter: 36 mm
  • Inner splines: 27
  • Diameter: 36 mm
  • Splines gearbox side: 31
Item no.:147137
  • Position: Front left, Inner
  • Splines gearbox side: 31
  • Splines wheel side: 26
Item no.:658408
  • Position: Rear, Outer
  • Seal diameter: 56 mm
  • Inner splines: 29
  • Diameter: 56 mm
  • ABS teeth: 88
Item no.:353893
  • Position: Front, Outer
  • Inner splines: 26
  • Total length: 112 mm
  • Splines wheel side: 36
Item no.:0194718
Item no.:218242
  • Position: Front right
  • Total length: 936 mm
  • Splines gearbox side: 28
  • Splines wheel side: 36
Item no.:1102082
  • Position: Front left
  • Total length: 516 mm
  • Splines gearbox side: 31
  • Splines wheel side: 36
Item no.:2102321
  • Position: Front right
  • Total length: 969 mm
  • Splines gearbox side: 28
  • Splines wheel side: 36
Item no.:141513
  • Position: Front left, Inner
  • Total length: 162 mm
Item no.:210144
  • Position: Front right
  • Total length: 947 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
Item no.:0805810
  • Hole spacing c/c: 113,5 mm
  • Bearing thickness: 18 mm
Item no.:219824
  • Total length: 1,002 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
Item no.:111256
  • Total length: 582 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
Item no.:638665
  • Position: Rear
Item no.:140638
  • Position: Front left, Inner
  • Seal diameter: 31 mm
  • Inner splines: 26
  • Diameter: 31 mm
  • Splines gearbox side: 26
Item no.:647266
  • Position: Rear, Inner
  • Seal diameter: 35 mm
  • Inner splines: 29
  • Diameter: 35 mm
  • Splines gearbox side: 26
Item no.:148165
  • Position: Front left, Inner
  • Seal diameter: 36 mm
  • Inner splines: 27
  • Diameter: 36 mm
  • Splines gearbox side: 31
Item no.:147065
  • Position: Front left, Inner
  • Splines gearbox side: 31
  • Splines wheel side: 26
Item no.:659694
  • Position: Rear, Outer
  • Seal diameter: 56 mm
  • Inner splines: 29
  • Diameter: 56 mm
  • ABS teeth: 88
Item no.:353804
  • Position: Front, Outer
  • Inner splines: 26
  • Total length: 112 mm
  • Splines wheel side: 36
Showing 1–24 of 36 products

Drivetrain for Volvo V40 T5

The Volvo V40 T5 represents one of the most performance-oriented variants in the V40 range, placing exceptionally high demands on the vehicle's drivetrain. Power transmission in a car equipped with the T5 engine must withstand substantial strain, particularly under hard acceleration and spirited driving. As a Swedish driveline specialist, we understand the importance of ensuring every component—from the smallest boot to the complete drive shaft—meets standards matching the original equipment. Maintaining the drivetrain on your Volvo V40 is vital for preserving its driving dynamics and safety.

Our range for the Volvo V40 T5 focuses on depth and relevance. We supply solutions that are technically verified to suit the specific gearing and power delivery of the T5 engine. Whether you need to replace a worn CV joint or an entire drive shaft, you can rely on our products to deliver the durability needed for demanding European road conditions. Choosing the correct parts for your Volvo ensures power reaches the wheels without unnecessary energy loss or unwanted noises.

How the drivetrain is engineered on the Volvo V40 T5

The drivetrain on a Volvo V40 T5 is a sophisticated design optimised to balance performance and refined comfort. With its transverse engine layout, power is transmitted via the gearbox to the front drive shafts, or in some configurations through an all-wheel-drive (AWD) system, depending on model year and specification. At the heart of this system are the drive shafts, each comprising an inner and an outer CV joint connected by a sturdy bar. The inner joint accommodates axial movement as the suspension articulates, while the outer joint allows steering angles while transferring drive directly to the wheel hub.

On the Volvo V40 T5, the dimensioning of these components is crucial. Because the T5 engine delivers peak torque from low engine speeds, the constant velocity joints must endure substantial torsional forces whenever you accelerate. The choice of materials in the joints and the quality of the grease sealed inside the boots directly determine service life. A properly functioning drivetrain is essential for the stability and traction control systems to operate as intended, as they rely on smooth, predictable power delivery across every wheel.

Common faults and symptoms

There are several distinct signs that the drivetrain on your Volvo V40 T5 is beginning to wear. One of the most typical symptoms of a failing outer CV joint is a rhythmic clicking or knocking noise audible on full steering lock, such as when manoeuvring into a parking bay or turning at a junction. If the sound accelerates alongside vehicle speed, it indicates the internal bearing balls have begun to wear into their tracks, frequently caused by a split boot letting in grit and water.

Vibration during acceleration is another frequent symptom, commonly pointing towards worn inner joints or imbalance in a driveshaft. In a powerful car like the V40 T5, these vibrations can often be felt through the steering wheel or the car's floorpan when the engine is under load. Regular inspection of the drive shaft boots is equally critical; grease splattered over the inside of the wheel rim or within the wheel arch indicates a damaged boot. Renewing a split boot promptly can often prevent the need for a complete CV joint replacement.

Common replacement parts for the Volvo V40 T5

Within the drivetrain range for the Volvo V40 T5, drive shafts and outer CV joints are the most frequently requested components. We currently offer 4 distinct variants of the drive shaft for the Volvo V40 T5, covering the majority of technical configurations for this model. A complete drive shaft assembly is often the most cost-effective solution for major repairs, supplying both inner and outer joints alongside brand-new boots fully fitted and ready to install.

Alongside complete shafts, the outer CV joint for the Volvo V40 T5 is a common replacement item. The outer joint is the most heavily stressed part of the assembly, having to handle high torque alongside tight steering angles. Replacing only the joint is an excellent option when the shaft itself remains in sound condition. We also advise checking the condition of the ABS rings and wheel bearings whenever servicing the drivetrain, as these parts work closely together to ensure stable and safe vehicle handling.

How to find the right part for your Volvo V40 T5

Navigate directly to the relevant sub-category for your Volvo V40 T5:

When dealing with suspected driveline issues, selecting the right category from the start saves time. By narrowing down the specific areas for the Volvo V40 T5, it becomes simpler to distinguish between problems in the drive shaft, CV joint or propeller shaft, taking you directly to the parts that match your vehicle's symptoms and fitment.

Follow these links to view live stock availability and technical specifications for each item. We provide all the technical data you need to pick the exact part on your first try, saving both time and labour costs in the garage.

Why shop with CVJoint24

CVJoint24 is more than a standard parts supplier; we are a dedicated Swedish specialist with an exclusive focus on driveline components. Our aim is to deliver high-level technical expertise alongside a specialist inventory catering to high-demand models like the Volvo V40 T5. When ordering with us, you benefit from our guaranteed fitment when you select your vehicle by make, model and engine, ensuring the parts you receive match your car.

We know your car is vital to your routine, so we dispatch orders rapidly across Europe to minimise garage downtime. Guided by our focus on accurate supply, we ensure every order is handled correctly from the outset. Our customer support team possesses comprehensive technical knowledge and is always on hand to assist with questions regarding fitment or component selection. Combining durable parts with specialist insight, CVJoint24 is the trusted choice for Volvo drivers seeking long-term performance and reliability.

Frequently asked questions about the drivetrain for Volvo V40 T5

How do I know whether I need a complete drive shaft or just an outer CV joint for my V40 T5?

If you only hear clicking noises when cornering, it is usually the outer CV joint that is worn. However, if you experience severe vibrations under acceleration, it may be the inner joint or the shaft itself that is damaged, in which case a complete drive shaft is usually the best and most durable solution.

Do all drive shafts from the Volvo V40 also fit the T5 model?

No, the T5 model often features sturdier dimensions and different gear ratios compared to smaller engine variants. It is therefore vital to select your exact make, model and engine to find the correct part engineered to withstand the high torque of the T5 engine.

What is included when I buy an outer CV joint from you?

When you purchase an outer CV joint for your Volvo V40 T5, it normally includes the joint itself, a model-specific CV boot, high-quality grease, circlips and, where required, a new centre bolt or nut to ensure a complete and safe installation.

Can I replace the drive shaft on my Volvo V40 T5 myself?

Yes, it is entirely possible for a competent DIY mechanic with the right tools, but it requires knowledge of how to dismantle the suspension and wheel hub. As the T5 is a performance model, it is particularly important that all bolts are torqued to the manufacturer's exact specifications.

How quickly can I have the parts delivered?

We always aim for dispatch the following working day for orders placed during the week. We understand that a car waiting in the garage needs its parts swiftly, which is why we always prioritise rapid processing of our drivetrain components.

Does the fitment guarantee also apply if I have an AWD version of the V40 T5?

Yes, our fitment guarantee applies as long as you select your specific make, model and engine in our vehicle selector. The system recognises whether your car is front-wheel drive or all-wheel drive, displaying only the parts that are technically correct for your exact drivetrain.