Volvo V60 T5 Polestar AWD

Welcome to CVJoint24, the international shop of a Swedish driveline specialist. For your Volvo V60 T5 Polestar AWD, we offer a carefully selected range of premium components engineered...

Products for Volvo V60 T5 Polestar AWD

6 products
1 - 6 of 6
Item no.:0596031
  • Position: Outer
  • Seal diameter: 54,1 mm
  • Inner splines: 28
  • Outer splines: 40
Item no.:0291553
  • Number of centre bearings: 2
  • Number of joints: 2
  • Total length: 2,140 mm
Item no.:2173576
  • Position: Front right
  • Total length: 993 mm
  • Splines gearbox side: 28
  • Splines wheel side: 40
Item no.:1169530
  • Position: Front left
  • Total length: 615 mm
  • Splines gearbox side: 31
  • Splines wheel side: 40
Item no.:1102469
  • Position: Front left
  • Total length: 600 mm
  • Splines gearbox side: 31
  • Splines wheel side: 40
Item no.:0503261
  • Position: Outer
  • Seal diameter: 54 mm
  • Inner splines: 28
  • Outer splines: 40

Volvo V60 T5 Polestar AWD drivetrain

The Volvo V60 T5 Polestar AWD represents a unique balance between Scandinavian design and high-performance engineering. The drivetrain in this specific model is at the heart of the car's ability to transfer power to the road in a controlled, efficient manner. Polestar's optimisation delivers higher torque and more aggressive power delivery, placing extra strain on components such as drive shafts and joints. Understanding the importance of a properly functioning drivetrain is vital for every owner of this model. It is not just about keeping the car moving forwards, but about how torque is distributed between the front and rear axles to maximise grip through corners and under hard acceleration. At CVJoint24, we specialise in these critical components to ensure your driving experience remains exactly as the engineers in Gothenburg and Polestar intended. By choosing the right spare parts, you preserve your vehicle's value and guarantee that all safety systems, such as stability and traction control, operate seamlessly alongside the mechanical power transfer in all driving conditions.

How the drivetrain is engineered on the Volvo V60 T5 Polestar AWD

The technical architecture of the drivetrain on a Volvo V60 T5 Polestar AWD is complex and sophisticated. The car uses a transverse engine layout where power is initially channelled through an automatic gearbox. From the gearbox, power is distributed to the front wheels via two robust drive shafts. To enable all-wheel drive, part of this power is directed rearwards through an angle gear to a propeller shaft. This prop shaft is a critical link that must remain perfectly balanced to prevent vibrations inside the cabin. At the rear sits an AWD coupling that rapidly alters power distribution between the front and rear axles depending on road surface and driving style. Each wheel is linked to the system via a driveshaft, with the outer CV joint playing a decisive role by accommodating suspension travel and steering angles simultaneously while delivering torque. This interplay of mechanical parts demands components of the highest quality so the system works harmoniously without premature wear or power loss, especially given the extra performance delivered by the T5 Polestar tune.

Common faults and symptoms

Identifying drivetrain issues early can save you significant repair costs down the line. For Volvo V60 owners, it is essential to pay attention to specific noises and vibrations. A classic sign of a worn outer CV joint on a Volvo V60 T5 Polestar AWD is a rhythmic clicking noise heard most clearly during sharp turns at low speed, such as when parking. If you notice vibrations during heavy acceleration that disappear as soon as you lift off the throttle, the fault typically lies with the inner constant velocity joints. For all-wheel-drive models, the propeller shaft is another potential source of trouble. Unbalance or worn joints in the prop shaft often cause a low-frequency droning noise or vibrations felt through the floor and seats, especially at speeds between 70 and 100 km/h. It is also important to inspect the CV boots regularly; a split boot allows grease to escape and dirt to penetrate, quickly destroying even the most durable CV joint. By acting at the first symptom, you can often simply replace an individual joint rather than a complete drive shaft, saving both time and money.

Common parts to replace on the Volvo V60 T5 Polestar AWD

In our range for the Volvo V60 T5 Polestar AWD, we have identified the key components that typically require replacement after many kilometres. We currently stock three different drive shaft variants, catering to requirements for both the front and rear axles. In addition to complete shafts, we supply heavy-duty outer CV joints engineered to handle the torque output of the tuned T5 engine. For drivers experiencing driveline vibrations, we offer high-grade replacement propeller shafts that restore smooth, quiet running. It is also common practice to inspect the ABS rings and CV boots when replacing a joint, as these suffer identical environmental exposure to road salt, grit and moisture. Choosing parts specifically engineered for AWD models is crucial, as components from front-wheel-drive variants often feature different dimensions and load ratings. Investing in the correct car parts from the outset avoids unnecessary rework and ensures your all-wheel-drive system operates reliably, whether tackling harsh winter conditions or spirited summer drives.

Find the right part for your Volvo V60 T5 Polestar AWD

Navigate directly to the relevant category for your Volvo V60 T5 Polestar AWD:

With multiple drivetrain components on an AWD vehicle, starting in the right section is essential. By comparing the exact component areas for the Volvo V60 T5 Polestar AWD, it becomes easier to differentiate between drive shaft, CV joint or propeller shaft issues and proceed to the category matching your symptoms and fitment.

If you are unsure which component has failed, check the original equipment (OEM) part number stamped on the old part, which is usually readable after a light wipe down. Our customer support team is on hand to help you interpret technical specifications, ensuring you order the right part first time and avoid unnecessary returns. With our fitment guarantee, you can rest assured that the parts selected for your vehicle's make, model and engine will fit accurately.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, supplying quality driveline parts from our central warehouse in Helsingborg, Sweden. We understand that when your vehicle is in the garage workshop or on axle stands, fast turnaround and accurate fitment are what count. That is why we maintain a comprehensive stock of drive shafts, CV joints and propeller shafts. Our focus is dedicated to the drivetrain, allowing us to offer deep model coverage and expert technical support that general car-parts suppliers often lack. When you order from us, you receive high-quality spare parts backed by our fitment guarantee and prompt dispatch across the EU. We continuously vet our manufacturing partners to ensure every part meets the rigorous demands of a modern Volvo. By pairing competitive prices with driveline expertise, we are the trusted choice for DIY mechanics and professional workshops requiring dependable parts for the Volvo V60 T5 Polestar AWD, from an individual CV joint boot to a complete prop shaft.

Frequently asked questions about the drivetrain for the Volvo V60 T5 Polestar AWD

How do I know if my Volvo V60 T5 Polestar AWD needs a new propeller shaft?

Common symptoms include vibrations felt through the floor or seats of the car, often at speeds between 70 and 100 km/h, as well as noises coming from the centre bearing.

Are the drive shafts on the Polestar model the same as on a standard V60?

No, Polestar models often feature reinforced components or specific dimensions to handle the higher torque. Always select your exact make, model and engine to find the correct part.

What causes a clicking noise when turning?

This is usually caused by a worn outer CV joint where the grease has escaped or dirt has entered through a damaged CV boot.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, if the shaft itself is undamaged, you can save money by replacing only the worn outer or inner CV joint.

How does the fitment guarantee work?

When you select your car's make, model and engine variant, we guarantee that the displayed parts will fit your specific vehicle, giving you total peace of mind when ordering.

How quickly are parts delivered?

We aim to dispatch in-stock items swiftly so your Volvo V60 can be back on the road without delay.