Volvo XC60 2.0 T5

Spare parts and drivetrain components for the Volvo XC60 2.0 T5. Select your make, model and engine to confirm exact fitment before ordering.

Products for Volvo XC60 2.0 T5

7 products
1 - 7 of 7
Item no.:0551038
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 54,1 mm
  • Outer splines: 40
  • Thread size: M10X1,5
Item no.:1110091
  • Position: Front left
  • Splines gearbox side: 31
  • Splines wheel side: 40
  • Total length: 615 mm
  • Joint diameter: 94 mm
Item no.:147538
  • Position: Inner
  • Inner splines: 27
  • Splines gearbox side: 31
  • Total length: 158 mm
Item no.:159972
  • Position: Outer
  • Inner splines: 40
  • Total length: 116 mm
Item no.:2110943
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 40
  • Total length: 998 mm
Item no.:0536647
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 54 mm
  • Outer splines: 40
  • Total length: 116 mm
Item no.:3545526
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 57,5 mm
  • Outer splines: 40
  • Total length: 112 mm

Volvo XC60 2.0 T5 drivetrain

The Volvo XC60 2.0 T5 is a sophisticated SUV that combines performance with comfort, placing high demands on every individual component in the power transmission. The drivetrain is the system that ensures power from your T5 engine actually reaches the road surface, and for a vehicle in this size category, the stresses are significant. When searching for car parts for your XC60, it is vital to choose a supplier that understands the technical nuances of this exact model variant. At CVJoint24, we have built up an extensive knowledge base around the drivetrain so we can offer you the very best parts. By focusing on specialist knowledge, we ensure that the components we supply not only fit physically, but also perform under the conditions your Volvo was engineered for. Investing in the right spare parts from the start is essential to maintain your vehicle's safety characteristics and long-term value, especially when it comes to components as critical as the driveline.

How the drivetrain is configured on the Volvo XC60 2.0 T5

The power transmission in a Volvo XC60 2.0 T5 is a technical feat engineered to handle the torque generated by the turbocharged four-cylinder engine. The system is built around a transverse engine layout where power is distributed via an advanced gearbox to the car's drive shafts. For XC60 models, this means the drive shafts must handle substantial articulation angles during both steering and heavy suspension travel, typical of an SUV with generous ground clearance. Each drive shaft consists of an inner and an outer CV joint protected by CV boots packed with specialised grease. The inner joint permits axial movement as the suspension moves up and down, while the outer constant velocity joint enables the front wheels to steer while continuously transmitting power. Understanding how these components interact is key to appreciating why manufacturing precision is so critical to prevent vibrations and noises in your Volvo.

Common faults and symptoms

There are several warning signs indicating that the drivetrain on your Volvo XC60 2.0 T5 requires attention. One of the most classic symptoms is a rhythmic clicking noise that occurs when taking a sharp turn under acceleration; this is almost exclusively a symptom of a worn outer CV joint. If you instead notice vibrations felt through the entire car, especially under load at speeds between 70 and 100 km/h, it can indicate play in an inner CV joint or an imbalance in the drive shaft itself. Another critical inspection point is the condition of the CV boots. If a boot splits, grease is thrown out by centrifugal force, leaving the joint unprotected against road salt, water and grit. This quickly accelerates wear on the bearing surfaces inside the joint, which in the worst-case scenario can lead to catastrophic failure, leaving you stranded. Regular inspection of these components is therefore sensible preventative maintenance against expensive repairs.

Common parts to replace on the Volvo XC60 2.0 T5

When it is time for a replacement, certain parts are more commonly required than others for the Volvo XC60 2.0 T5. We see a clear trend where complete drive shafts are frequently chosen to save workshop labour time and guarantee the entire assembly is in brand-new condition. Here are the most relevant categories for your vehicle:

  • Drive shafts for Volvo XC60 2.0 T5 – A comprehensive solution that includes both inner and outer joints alongside pre-fitted CV boots.
  • Outer CV joints for Volvo XC60 2.0 T5 – The ideal choice if the shaft itself is otherwise in good condition but the outer joint has begun to click.

Choosing the correct part is not merely about finding something that bolts on, but about sourcing a component that reliably withstands the torque generated by the T5 engine. Our spare parts are tested to meet or exceed the demands placed on a modern premium SUV, providing you with a long-term solution to your driveline issues.

How to find the right part for your Volvo XC60 2.0 T5

Proceed to the relevant section for your Volvo XC60 2.0 T5:

On a vehicle with several possible driveline faults, it pays to start in the correct category straight away. By comparing the exact component areas for the Volvo XC60 2.0 T5, it is easier to distinguish between faults in a drive shaft, CV joint or propeller shaft, helping you navigate directly to the page that best matches your symptoms and fitment needs.

Navigating the variety of replacement parts for a Volvo XC60 requires precision. Subtle but vital differences often exist between model years and engine variants, such as the spline count on the driveshaft or the diameter of oil seal surfaces. To help you select the exact part first time, simply choose your vehicle's make, model and engine variant in our store. This filters our catalogue to show the exact parts engineered for your specific 2.0 T5 configuration, removing the risk of dismantling your car only to find the replacement part does not fit. We also recommend checking whether your car has specific factory options that might affect the drivetrain. If you have any questions regarding our range for Volvo, our technical specialists are on hand to offer guidance so your order is completely accurate.

Why buy from CVJoint24?

CVJoint24 is your dedicated partner for vehicle driveline parts. As a Swedish driveline specialist shipping across the EU from our central warehouse in Helsingborg, Sweden, we maintain a product range with category depth that general parts factors rarely match. We understand that your Volvo XC60 2.0 T5 is an essential part of your daily routine, which is why we work tirelessly to supply the correct component with prompt dispatch. Our accurate fitment data gives you total peace of mind that the parts you order will work seamlessly on your vehicle. We combine premium-quality products with deep technical expertise in automotive driveline mechanics, ensuring you receive components built to endure harsh European roads and demanding climates. We are proud to be the trusted specialist for drivers seeking quality, expertise and dependable service for their drivetrain.

Frequently asked questions about Drivetrain for Volvo XC60 2.0 T5

How do I know if a CV joint is failing on my Volvo XC60 2.0 T5?

The most common sign is a rhythmic clicking noise during sharp turns or chassis vibrations under acceleration.

Can I replace just the CV joint or do I have to replace the entire shaft?

It depends on the extent of the damage. If the rest of the shaft is undamaged, you can replace just the outer CV joint, but in cases of heavy wear, a complete drive shaft is often more cost-effective.

Do all drive shafts fit the XC60 regardless of engine variant?

No, there are differences in length and splines depending on the engine and gearbox. Always select your make, model and engine to find the exact part for your 2.0 T5.

What is included when I buy an outer CV joint from you?

Our CV joints are supplied as complete kits including the joint, CV boot, grease, clamps and fitting hardware for a hassle-free replacement.

How does a split boot affect my car's drivetrain?

A split CV boot allows dirt and moisture to enter while lubricating grease escapes, leading to rapid wear and eventual failure of the CV joint.

Why should I choose CVJoint24 for my spare parts?

We are Swedish driveline specialists offering extensive expertise, a guaranteed fit and fast delivery across Europe directly to you.