ABS rings for Audi A4 Avant 2.6

This page features ABS rings for the Audi A4 Avant 2.6. It is dedicated specifically to this estate model with front-wheel drive, saving you from comparing parts for other vehicle variants.

Products for ABS rings for Audi A4 Avant 2.6

3 products
1 - 3 of 3
Item no.:0370916
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:333521
  • Position: Front
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:0357111
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm

ABS rings for Audi A4 Avant 2.6

When it comes to braking safety and electronic stability, the ABS ring is a small yet crucial component on your Audi A4 Avant 2.6. This model, typically part of the classic B5 generation fitted with the smooth 2.6-litre V6 engine, requires precision spare parts to retain its renowned driving comfort and safety. An ABS ring, often called an ABS reluctor ring, is mounted onto the CV joint and works in tandem with the car's ABS sensors to prevent the wheels from locking up under heavy braking. At CVJoint24, you will find carefully selected rings engineered to withstand harsh European climates and the demands of daily driving. We ensure that every component meets the highest standards so your Audi remains safe on the road.

What does the ABS ring do on an Audi A4 Avant 2.6?

The primary role of the ABS ring on an Audi A4 Avant 2.6 is to serve as a toothed tone ring for the vehicle's anti-lock braking system. As the wheel turns, the teeth on the ring generate a magnetic pulse for the adjacent ABS sensor. The car's electronic control unit interprets these signals in real time to calculate the rotational speed of each individual wheel. On a car with the torque and weight of the 2.6 engine, it is vital that this system operates flawlessly, particularly on slippery surfaces or through corners where stability is put to the test. If the system detects that a wheel is about to lock, brake pressure is instantly modulated via the hydraulic control unit. Without an intact ring, the system cannot read wheel speed accurately, disabling vital electronic safety functions.

Common signs of wear

By far the most common failure on an Audi A4 Avant 2.6 ABS ring is cracking caused by corrosion developing underneath. As rust builds up on the CV joint seating surface, it expands and exerts tremendous outward pressure until the ring snaps. Typical symptoms include the ABS warning light illuminating on the dashboard or the ABS activating and "juddering" during normal, low-speed braking just as the vehicle comes to a complete halt. You may also feel unwanted vibrations through the brake pedal in dry conditions. If you notice these symptoms, it is time for a visual inspection. A cracked ring sends erratic pulses to the sensor, misleading the car's ECU into thinking a wheel has locked up while it is still turning.

How to choose the correct ABS ring

Selecting the correct ABS ring for your Audi A4 Avant 2.6 requires care, as variations do exist. Differences depend on whether the vehicle is front-wheel drive or fitted with Quattro four-wheel drive, alongside differences in tooth count and internal diameter. To ensure you get the right part, simply select your car's make, model and engine variant in our store. This is the most reliable way to find the exact fit straight away and avoid unnecessary returns. Always verify the tooth count and width specifications before fitting. As driveline specialists, we ensure our products match original equipment (OE) specifications for a hassle-free installation and long service life on your Audi, whatever the driving conditions.

Related parts to check

Make sure to check these matching pages for the same vehicle when working with an ABS ring:

When a drivetrain component shows signs of wear, neighbouring parts on the same car often require attention as well. By comparing these dedicated pages for the Audi A4 Avant 2.6, it becomes much easier to determine whether the fault lies strictly with the ABS ring or another connected component in the transmission system.

This is particularly relevant on models where vibrations, play and noises can travel between several drivetrain parts. A quick check of related categories reduces the risk of replacing the right type of component while overlooking an adjacent worn part causing identical symptoms.

Addressing multiple components simultaneously saves both time and money in the long run, as the labour involved in dismantling the suspension is often the main cost in this type of repair.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, supplying quality components from our central warehouse in Helsingborg, Sweden across the European Union. We combine deep technical expertise with outstanding range depth, covering everything from compact ABS rings to complete drive shafts. When you shop with us, you receive high-quality car parts backed by our fitment guarantee. We understand how important it is to get your Audi A4 Avant 2.6 back on the road quickly, which is why we provide fast dispatch on all stocked lines. Our priority is ensuring you get the right part at the right price, with total peace of mind.

Frequently asked questions about ABS rings for Audi A4 Avant 2.6

Why has the ABS warning light come on in my Audi A4 Avant 2.6?

It is often caused by a cracked ABS ring or a contaminated sensor that cannot read the wheel's rotation correctly, triggering a fault code in the system.

Can I replace just the ABS ring, or do I need to replace the entire CV joint?

On the Audi A4 Avant 2.6, you can easily replace just the ring, provided the CV joint is otherwise in good condition and the mounting surface is thoroughly cleaned of rust.

How many teeth should the ABS ring have on an Audi A4 Avant 2.6?

This varies depending on the chassis number and drivetrain. Select your car's make, model and engine to identify the exact tooth count for your vehicle.

What happens if I drive with a broken ABS ring?

The ABS system may stop working or trigger inappropriately at low speeds, significantly reducing braking performance and compromising safety.

Is it difficult to fit a new ABS reluctor ring on an Audi?

It requires removing the CV joint from the hub and thoroughly cleaning the seat, but it is a standard job for an experienced garage or competent DIY mechanic.

Does the same ABS ring fit both the front and rear of the A4 Avant?

No, the dimensions and tooth counts usually differ between the front and rear axles. Always check the axle position in the product specifications before ordering.