ABS rings for Audi A6 Avant 2.4

Ensure reliable operation with the right ABS ring for your Audi A6 Avant 2.4. Browse matching parts for front-wheel drive estate models. Select your make, model and engine to find the...

Products for ABS rings for Audi A6 Avant 2.4

4 products
1 - 4 of 4
Item no.:0393441
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:333092
  • Position: Front
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:0310023
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:339567
  • Position: Front
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm

ABS rings for Audi A6 Avant 2.4

Maintaining the braking system and its associated equipment is vital for the safety of your Audi A6 Avant 2.4. The ABS ring, often called an ABS reluctor ring, is a small but critical component fitted to the CV joint. On Audi models with the 2.4-litre engine, it is common for the ring to be exposed to corrosion and mechanical wear over time. At CVJoint24, you will find specifically selected rings that match the exact technical specifications for your car and its chassis. We focus on supplying parts that meet or exceed original equipment standards to ensure long service life and reliable operation in all weather conditions.

Our range covers the various versions available, whether your car is front-wheel drive or fitted with the renowned Quattro system. By choosing an ABS ring from a specialist, you ensure that the material is built to withstand European winters with salted roads and severe temperature fluctuations. A correctly fitted ring restores the vehicle's safety characteristics and prevents unnecessary fault codes in the future.

What does the ABS ring do on an Audi A6 Avant 2.4?

The ABS ring's task is to provide the car's ABS sensor with precise information about the rotational speed of the wheel. On an Audi A6 Avant 2.4, the ring rotates with the drive shaft, and the sensor reads the magnetic pulses or teeth on the ring as the wheel turns. This data is fed continuously to the vehicle's electronic control unit (ECU), which in turn modulates brake pressure during heavy braking or if a wheel is at risk of locking up. It is a fundamental component of the vehicle's active safety system that demands absolute precision from every tooth to function properly.

Without an operational ring, the system cannot determine if a wheel has stopped or is rotating slower than the others, which leads to the ABS being disabled to prevent erratic intervention. On a substantial estate like the Audi A6 Avant, this system is particularly crucial when carrying heavy loads or driving on slippery winter roads. The precision of the ring's design directly dictates how quickly and effectively your car's safety systems can respond in an emergency.

Common signs of wear

By far the most common sign of a defective ABS ring on an Audi A6 Avant 2.4 is an illuminated ABS warning light on the dashboard, frequently accompanied by an audible warning chime. Many drivers also experience the ABS cutting in with a judder or pulsing through the brake pedal when braking at very low speeds, even on dry tarmac with plenty of grip. This symptom usually occurs because the ring has cracked due to rust expanding beneath it, which causes the ring to spread and distorts the gap between the teeth or interrupts the signal.

A cracked ring sends faulty readings to the sensor, confusing the car's ECU and leading it to believe that a wheel is about to lock up. During a visual inspection at a routine service or tyre change, you can often spot obvious cracks, severe rust or, in worse cases, missing teeth on the ring. If your Audi behaves unusually under braking, it is well worth inspecting the condition of your ABS rings before the system fails entirely.

How to choose the correct ABS ring

When selecting a replacement ABS ring for your Audi A6 Avant 2.4, it is essential to check the tooth count as well as the ring's internal diameter. Over the production run, Audi used different configurations depending on chassis number and drivetrain, although the 2.4 variant generally follows a specific technical standard. The most reliable way to find the correct part is to select your vehicle's make, model and engine on our website. We have thoroughly categorised our catalogue so that you can find the right part for your Audi A6 Avant 2.4 without having to remove and measure the old one first.

Keep in mind that an ABS ring with the wrong tooth count will trigger fault codes immediately upon fitting, as its rotational speed signal will not match the other wheels. Our fitment guarantee gives you the confidence that the part you order is strictly intended for your vehicle. By selecting your make, model and engine, you can easily filter for options that are fully compatible with your car's braking system and drivetrain.

Related components to check

It is also worth checking these exact pages for the same vehicle when working on the ABS ring:

When a driveline component shows signs of wear, neighbouring parts on the same car often require inspection as well. Comparing these exact pages for the Audi A6 Avant 2.4 makes it simpler to determine whether an issue lies with the ABS ring itself or with an adjacent part of the drivetrain.

This is especially important on models where vibrations, play and unusual noises can transfer symptoms across several driveline components. Checking related categories reduces the risk of replacing the right type of part while overlooking an adjacent component that causes the same underlying fault.

Replacing an inner CV joint on an Audi A6 Avant 2.4 at the same time can prove cost-effective if the driveshaft has already been removed to access the ABS ring, saving on duplicate labour.

Why shop with cvjoint24.com

CVJoint24 is your dedicated partner for Audi drivetrain and transmission components. We combine extensive technical expertise with a specialist range of driveline parts that are often difficult to source through general car part suppliers. When you buy an ABS ring for your Audi from us, you receive a high-quality component backed by our comprehensive fitment guarantee. As Swedish driveline specialists, we understand the technical precision needed to keep your vehicle running smoothly.

We know your time is valuable and that you want your vehicle back on the road without delay. That is why we offer fast dispatch from our central warehouse for all stocked items. Our goal is to make ordering the correct component straightforward, whether you are a competent DIY mechanic or running a professional garage. With our commitment to quality, expertise and efficiency, we are the natural choice for your Audi A6 Avant 2.4. Always the right part, straight from your driveline specialist.

Frequently asked questions about ABS rings for Audi A6 Avant 2.4

What are the most common symptoms of a broken ABS ring on an Audi A6 Avant 2.4?

The most common signs are an ABS warning light staying permanently lit, or abnormal vibrations and pulsing through the brake pedal when braking at low speeds on dry surfaces.

Why does the ABS ring crack on my Audi?

This is usually caused by corrosion (rust) developing between the CV joint and the ring. As the rust expands, it creates outwards pressure from within that eventually causes the steel ring to snap.

Do I have to replace the complete CV joint if only the ABS ring is broken?

No, on the Audi A6 Avant 2.4 it is usually perfectly fine to replace just the ABS ring, provided that the CV joint itself is otherwise in good working order and free from noises.

How do I make sure I select an ABS ring with the correct tooth count?

The easiest and most reliable way is to select your vehicle's exact make, model and engine variant in our search filter. We will then display only the rings specifically tailored to your car's specification.

Can I drive my Audi A6 Avant 2.4 with a broken ABS ring?

The car can still be driven, but safety systems such as ABS and electronic stability control (ESP) may be disabled or behave unpredictably. We strongly recommend rectifying the fault as soon as possible for your safety.

Is a fitment guarantee included when I buy an ABS ring from you?

Yes, we always provide a fitment guarantee when you select your vehicle by make, model and engine, ensuring that the spare part is guaranteed to fit your Audi A6 Avant 2.4.