ABS rings for Audi A8 6.0 W12 Quattro

Need a replacement ABS ring for your Audi A8 6.0 W12 Quattro? As Swedish driveline specialists, we supply precision-engineered components tailored to your car. For a high-performance...

Products for ABS rings for Audi A8 6.0 W12 Quattro

2 products
1 - 2 of 2
Item no.:0373448
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:0374794
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm

ABS rings for Audi A8 6.0 W12 Quattro

Finding the right spare parts for a technically sophisticated and high-performance vehicle like the Audi A8 6.0 W12 Quattro requires precision and specialist knowledge. The ABS ring, also known as an ABS reluctor ring, is a compact yet crucial component of the car's active safety systems. In a vehicle equipped with the massive W12 engine and legendary Quattro four-wheel drive, the entire drivetrain is subjected to substantial forces and thermal loads. Every wheel rotation signal must be pinpoint accurate so that the car's stability systems can make split-second decisions. At CVJoint24, we specialise in these critical components, allowing you as an owner to maintain your car's original performance and safety without compromising on quality.

What does the ABS ring do on an Audi A8 6.0 W12 Quattro?

Mounted on the outer CV joint, the ABS ring acts as a precision-toothed pulse ring. As the wheel turns, the ring's teeth pass an electromagnetic wheel speed sensor, generating an electrical signal for the electronic control unit (ECU). For an Audi A8 6.0 W12 Quattro, this data is vital not only for the anti-lock braking system, but also for traction control (ASR) and electronic stability control (ESP). Because the W12 model channels immense torque through its Quattro drivetrain, the ABS signals are constantly monitored to detect the slightest wheel slip. If a reluctor ring is cracked, corroded or contaminated, the control unit receives corrupted signals, which can cause the system to shut down or trigger unexpected, potentially hazardous braking and torque intervention.

Common symptoms of wear

The clearest sign of a failing ABS ring is an illuminated ABS or ESP warning light on your Audi A8 dashboard. A very common issue across European winters is corrosion jacking. Rust builds up beneath the ring on the CV joint body, expanding outward and exerting immense pressure until the ring snaps. Once the ring cracks, the spacing between the teeth widens at the fracture point, tricking the sensor into registering sudden wheel speed drops. This typically causes the ABS to kick in and pulse through the brake pedal during gentle braking at low speeds just before stopping. Because the Audi A8 6.0 W12 Quattro is a heavy luxury saloon, addressing these symptoms promptly is essential to preserve full braking performance in emergencies.

How to select the correct ABS ring

When selecting a replacement ABS ring for your Audi A8 6.0 W12 Quattro, precise technical dimensions are paramount. Dimensions can vary across inner diameter, outer diameter and, crucially, tooth count depending on production dates and chassis numbers. Fitting a ring with an incorrect tooth count will lead to erratic speedometer readings and cause safety systems to malfunction. The most reliable way to find the right component is to filter our catalogue by your car's make, model and engine variant. We provide an exact fitment guarantee so you can be confident you are ordering an OE-matching part. Before fitting, always ensure the seating surface on the CV joint is thoroughly cleaned of rust to prevent premature cracking on the new ring.

Related parts to inspect

We recommend also checking these exact pages for the same vehicle when working on the ABS ring:

When a drivetrain component wears out, related parts on the same vehicle often require attention too. By comparing these dedicated pages for the Audi A8 6.0 W12 Quattro, it becomes much easier to determine whether an issue lies with the ABS ring or another adjoining driveline component.

This is particularly important on performance models where vibrations, play and unwanted noises can transfer symptoms across interconnected parts. A quick check of related categories helps ensure you do not replace the right type of component while missing adjacent wear that causes the same underlying fault.

Why shop with CVJoint24?

CVJoint24 is far from an ordinary car parts retailer; we are the international shop of a Swedish driveline specialist shipping across the EU from our central warehouse in Helsingborg, Sweden. We understand the high engineering demands placed on drivetrain components for flagship luxury saloons like the Audi A8 6.0 W12 Quattro. With our focused product range, we offer deep specialist knowledge that general parts suppliers rarely match. We stand by our fitment accuracy, offering dedicated technical advice and fast dispatch across Europe. When you order from CVJoint24, you receive robust components built for long-term durability, helping you get your Audi back on the road with fully functional active safety systems.

Frequently asked questions about ABS rings for Audi A8 6.0 W12 Quattro

Why is the ABS warning light on in my Audi A8 W12?

This is often caused by a cracked or corroded ABS ring providing incorrect signals to the sensor, which triggers a fault code in the system.

Can I replace the ABS ring myself on an Audi A8 6.0?

Yes, it is possible if you have the tools to dismantle the CV joint, but it requires meticulous cleaning of the mounting surface to prevent future cracking.

How many teeth should the ABS ring have for an Audi A8 6.0 W12 Quattro?

This varies depending on the chassis number; select your car's make, model, and engine variant to see the exact specification for your specific vehicle.

What happens if I drive with a broken ABS ring?

Safety systems such as ABS and ESP may malfunction or fail entirely, which impairs vehicle handling and increases stopping distances.

Is the ABS ring included when I purchase a new outer CV joint?

On most models for the Audi A8 W12, the ring comes pre-installed on the outer CV joint, but it can also be bought separately from us if the joint itself is in good condition.

How do I prevent the new ABS ring from corroding?

Ensure the CV joint surface is completely clear of rust and apply a thin layer of protective grease or heat-resistant paint before pressing the new ring into place.