ABS rings for BMW Z4 Roadster 2.2 I E85

Need a replacement ABS ring for your BMW Z4 Roadster 2.2 I E85? As a dedicated Swedish driveline specialist shipping across the EU, CVJoint24 provides high-quality components that keep...

Products for ABS rings for BMW Z4 Roadster 2.2 I E85

1 products
1 - 1 of 1
Item no.:0340421
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 83 mm
  • Width: 12 mm

ABS rings for BMW Z4 Roadster 2.2 I E85

The BMW Z4 Roadster (E85) featuring the silky-smooth 2.2-litre straight-six engine is built purely for driving pleasure and handling precision. To keep this driving experience both safe and controlled, the car's electronic driver assistance systems must function flawlessly. The ABS ring, also known as an ABS reluctor ring, is a compact yet fundamental part of this setup. Mounted on the drive shaft, it plays a vital role in how the vehicle handles braking and stability. On a rear-wheel-drive sports car such as the Z4 Roadster, it is particularly crucial that power delivery and safety systems work in total harmony to prevent unexpected slides or system faults during enthusiastic driving.

When searching for a replacement part for your E85, it is essential to choose components manufactured to the same high standards as the original. A damaged or substandard ABS ring can cause the car's dynamic stability control (DSC) and anti-lock braking system (ABS) to receive false wheel speed signals, directly compromising road safety. At CVJoint24, we specialise in driveline components and fully understand the exact technical demands of BMW chassis engineering.

What does the ABS ring do on a BMW Z4 Roadster 2.2 I E85?

The ABS ring works as part of a magnetic or optical wheel speed sensing setup. As the wheel turns, the teeth or magnetic tracks of the reluctor ring sweep past a sensor that sends pulses to the engine and brake control units. The control unit computes the precise rotational speed of each individual wheel. On a BMW Z4 Roadster 2.2 I E85, this real-time data is used not only to prevent wheel lock-up under heavy braking, but also to manage Dynamic Stability Control (DSC). The system can apply braking force to individual wheels or cut engine output whenever a loss of traction is detected.

Without a sound ABS ring, the control unit cannot read wheel speed correctly. This typically forces the system into a failsafe mode, switching off both the ABS and stability control. For a lightweight, rear-wheel-drive roadster, this means a noticeable drop in active safety reserves, especially in wet weather or through tight corners where DSC would normally intervene to keep the car composed.

Common signs of wear and failure

The most common cause of ABS ring failure on E85-generation BMW models is corrosion. Because the ring is exposed underneath to wet road conditions, grit, and road salt, rust can develop between the ring and the driveshaft. As this rust layer expands, it exerts outward pressure until the ring cracks. A split ring alters the tooth spacing, confusing the sensor and generating erratic signals. A clear symptom is the ABS warning light illuminating on the instrument cluster, often accompanied by the DSC or traction control light.

Other tell-tale signs include an unwanted pulsing sensation through the brake pedal under gentle braking on dry asphalt, or unexpected DSC interventions during normal cornering. If you notice erratic braking response or intermittent warning lamps, inspect your ABS rings without delay. Ignoring these symptoms can lead to costlier repairs if an expanding ring rubs against and destroys the wheel speed sensor, or if driver aids fail when you need them most.

Choosing the right ABS ring

Finding the correct replacement ABS ring for a BMW Z4 Roadster 2.2 I E85 requires matching the car's precise technical specifications. Variations exist in tooth counts, internal diameters, and ring widths depending on the production year and drive shaft manufacturer. To ensure you receive a part with an exact fit, simply select your car's make, model, and engine variant in our store. This narrows the selection down to components verified for your specific roadster, saving time and preventing ordering errors.

Once you have the part, it is always good practice to compare it against the original unit before fitting. Double-check the tooth count and ensure the build quality is sound. Because we supply high-standard ABS rings for BMW, you can trust our components to withstand tough European winters and the rigours of spirited driving. The right fit is essential for a lasting repair and a properly functioning safety system.

Related components to inspect

We also recommend inspecting these exact category pages for the same vehicle when working on the ABS ring:

When a driveline component shows signs of wear, neighbouring parts on the same car often require attention too. By checking these related pages for the BMW Z4 Roadster 2.2 I E85, you can more easily determine whether a fault lies solely with the ABS ring or stems from another part of the driveline assembly.

This is particularly true for rear-wheel-drive platforms where vibrations, play, and driveline noises can mask which component is failing. A quick check of related categories helps you avoid replacing one worn item while overlooking an adjacent part that causes the same underlying issue.

By proactively checking these driveline parts, you can prevent future breakdowns and make sure your BMW continues to deliver the precise driving dynamics it was designed for. A well-maintained chassis and an intact drivetrain are the foundation of any genuine sports car.

Why buy from CVJoint24?

CVJoint24 is your specialist partner for drivetrain components across Europe. Operating as the international shop of an experienced Swedish specialist with a central warehouse in Helsingborg, Sweden, we combine in-depth technical knowledge with a catalogue tailored to enthusiastic motorists and professional garages alike. When you order an ABS ring for your BMW Z4 from us, you get quality car parts backed by our dependable fitment guarantee. We know that getting the right part first time is vital, which is why we provide detailed technical data and an effortless selection by vehicle make, model, and engine.

With our focus on component accuracy and dedicated drivetrain expertise, our replacement parts deliver dependable durability. We dispatch quickly from stock across the European Union, helping you get your car back on the road without unnecessary delay. Choose a specialist who understands your car's drivetrain—choose CVJoint24 for your next repair.

Frequently asked questions about ABS rings for BMW Z4 Roadster 2.2 I E85

Does this ABS ring fit all BMW Z4 models?

No, this specific ABS ring is designed for the BMW Z4 Roadster 2.2 I E85. It is important to check the dimensions and tooth count, as these can vary between different engine options and model years.

Why has the ABS warning light come on in my BMW Z4?

This is often caused by the ABS ring cracking due to rust building up underneath it, which prevents the sensor from correctly reading the wheel speed.

Do I have to replace the entire drive shaft if the ABS ring is broken?

No, in most cases you can replace just the ABS ring. This is a significantly more cost-effective solution than replacing the complete drive shaft.

How do I know I am choosing the right ABS ring for my E85?

The safest way is to filter by your car's exact make, model and engine variant in our shop to ensure you view the parts that fit your specific BMW.

Can I drive my BMW Z4 with a broken ABS ring?

It is not recommended. When the ABS ring is broken, safety systems such as ABS and DSC are disabled, which compromises the car's handling and safety under braking.

What is the difference between an ABS reluctor ring and an ABS ring?

They are simply two names for the same component. Both refer to the toothed or magnetic ring used to send wheel-speed signals to the vehicle's ABS system.