ABS rings for Citroen Xsara

Looking for a replacement ABS ring for your Citroen Xsara? At cvjoint24.com, you will find vehicle-specific components that ensure your braking system operates flawlessly. As a dedicated...

Products for ABS rings for Citroen Xsara

4 products
1 - 4 of 4
Item no.:0301912
  • ABS teeth: 29
  • Inner diameter: 80 mm
  • Outer diameter: 90 mm
  • Width: 15 mm
Item no.:0364836
  • ABS teeth: 29
  • Inner diameter: 82,72 mm
  • Outer diameter: 90 mm
  • Width: 15 mm
Item no.:0302355
  • ABS teeth: 29
  • Inner diameter: 79 mm
  • Outer diameter: 90 mm
  • Width: 10 mm
Item no.:0392029
  • ABS teeth: 29
  • Inner diameter: 86 mm
  • Outer diameter: 90 mm
  • Width: 18 mm

ABS rings for Citroen Xsara

The ABS ring is a critical component on your Citroen Xsara that is frequently exposed to severe stress from weather, road grit and road salt. On this page, we have gathered the most relevant options for your vehicle to ensure you find a part with precise fitment. Because the Citroen Xsara was manufactured in several body styles and with different engine options, it is essential to check that the tooth count and diameter match the original part on your car. We supply high-quality ABS reluctor rings specifically engineered to withstand harsh European climates and prevent future corrosion issues that are otherwise common on this type of spare part.

Our range for Citroen Xsara is hand-picked to meet stringent demands for safety and durability. By choosing an ABS ring from a specialist, you ensure that the signal sent to the car's control unit remains stable and dependable. We know that correct fitment is crucial, which is why we only work with components manufactured to a high technical standard. Investing in a quality ABS ring is a cost-effective way to restore your car's braking performance without needing to replace the entire CV joint unnecessarily.

What does an ABS ring do on a Citroen Xsara?

The ABS ring, also commonly referred to as an ABS reluctor ring or sensor ring, is mounted on the CV joint and supplies the ABS sensor with continuous wheel-speed data. For a Citroen Xsara, this system is vital for ensuring the anti-lock brakes function properly in all driving conditions. As the wheel turns, the teeth on the ring pass the sensor at speed, generating a magnetic pulse that is converted into an electrical signal. This signal is sent directly to the car's electronic control unit (ECU), which detects whether any wheel is about to lock up during braking.

If the control unit detects that a wheel is rotating slower than the others, it modulates the braking pressure to that specific wheel to prevent skidding and maintain steering control. Without a functional ABS ring, the system loses its ability to read wheel rotation, disabling key safety features. It is therefore a small but crucial part for active vehicle safety and stability. A properly functioning ring contributes to shorter braking distances on slippery surfaces and gives the driver better control in critical situations.

Common signs of wear

The most common sign that an ABS ring on your Citroen Xsara needs replacing is the ABS warning light illuminating on the dashboard. This is often caused by the ring cracking or distorting due to corrosion building up underneath. As rust forms between the CV joint and the ring, the material expands and exerts immense pressure that eventually causes the ring to snap. A cracked ring alters the spacing between the teeth at the break, confusing the sensor and generating erroneous readings in the system.

Another clear symptom is a pulsing or vibrating brake pedal during normal, low-speed braking just before the car comes to a complete halt, even on dry, smooth tarmac. This occurs because the system mistakenly interprets the signal as a wheel locking up and triggers the ABS unnecessarily. A visual inspection inside the wheel arch will often reveal whether the ring is loose, missing teeth or clearly cracked. Ignoring these signs can lead to the entire ABS system being deactivated, negatively impacting your driving safety.

How to choose the correct ABS ring

Selecting the correct ABS ring for your Citroen Xsara requires care, as there are technical variations depending on model year, gearbox and engine size. The most important measurements to check are the tooth count and the inner diameter of the ring. If you buy a ring with the wrong number of teeth, the ABS system will register an incorrect speed, leaving the warning light on even after installation. We always recommend counting the teeth on your old ring before ordering to be completely sure.

To make the selection as straightforward and reliable as possible, simply select your Citroen Xsara's make, model and engine variant here on cvjoint24.com. This filters down to the parts that are technically compatible with your specific car. If you are still unsure which specification applies to your Xsara, our customer service team is ready to assist. We have in-depth knowledge of Citroen drivetrains and can guide you to the right product, ensuring your repair goes smoothly with parts that fit accurately.

Related parts to check

Feel free to inspect these exact pages for the same vehicle when working on the ABS ring:

When a drivetrain component shows signs of wear, neighbouring parts on the same car often warrant inspection too. By comparing these dedicated pages for Citroen Xsara, it becomes much easier to determine whether the issue lies solely with the ABS ring or another connected component in the drivetrain.

This is especially important on models where vibrations, play and unusual noises can transfer symptoms across several parts of the drivetrain. A quick check of related categories reduces the risk of replacing the right type of part while overlooking an adjacent component that affects the very same issue.

Why buy from cvjoint24.com?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders quickly across the EU from our central warehouse in Helsingborg, Sweden. Unlike general car parts retailers, we focus deeply on drivetrain and transmission components, allowing us to offer technical expertise few others can match. We understand how important it is to get the correct part promptly when your car is up on axle stands, which is why we prioritise fast dispatch on our stocked inventory. With our reliable fitment guidance, you can order parts for your Citroen Xsara with total confidence.

We combine technical know-how with an extensive range of high-quality components at competitive prices. Our goal is to make it as simple as possible for you to maintain your car with parts built to last year after year. Buying from a specialist gives you more than just a spare part: you get the reassurance of components selected for their durability and exact function. Welcome to cvjoint24.com – we help keep your Citroen Xsara moving with the right parts from day one.

Frequently asked questions about ABS rings for Citroen Xsara

How do I know which ABS ring fits my Citroen Xsara?

The most reliable way is to select your vehicle's make, model, and engine variant in our store. We also recommend counting the number of teeth on your old ring and measuring the inner diameter to ensure 100% compatibility.

Can I replace just the ABS ring, or do I need to replace the entire CV joint?

On the Citroen Xsara, you can easily replace just the ABS ring if the CV joint itself is otherwise in good condition. It is a considerably more affordable solution than replacing the complete joint.

Why do ABS rings crack on Citroen models?

This is usually caused by corrosion. Rust builds up between the CV joint and the ring, creating outward pressure until the ring snaps. This is common on European roads where road salt is used heavily during winter.

Will a cracked ABS ring affect the vehicle inspection (MOT)?

Yes, if the ABS warning light is illuminated or the system is malfunctioning, the car will fail its annual inspection. It is treated as a major safety defect.

What tools are needed to replace an ABS ring on a Xsara?

You generally need tools to remove the wheel, brake caliper, and disconnect the drive shaft from the hub. When fitting the new ring, it often helps to warm it gently so it expands and slides smoothly into position.

Is there a difference between front and rear ABS rings on the Citroen Xsara?

Yes, there can be differences in both diameter and tooth count between the front and rear axles. Always verify the specifications for the exact position you are repairing.