ABS rings for Skoda Superb 1.8 TSI

Need a replacement ABS ring for your Skoda Superb 1.8 TSI? At CVJoint24, you will find premium, model-specific components engineered to restore your ABS system to flawless operation. As...

Products for ABS rings for Skoda Superb 1.8 TSI

2 products
1 - 2 of 2
Item no.:0397422
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:0354916
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm

ABS rings for Skoda Superb 1.8 TSI

Maintaining the braking system on a Skoda Superb 1.8 TSI is essential for both safety and driving comfort. The ABS ring, also known as an ABS reluctor ring, is a small but vital part of the anti-lock braking system. For the 1.8 TSI engine in particular, which is often paired with a specific drivetrain, it is crucial to select an ABS ring calibrated precisely to your car's technical specifications. An incorrect ring can cause sensors to read incorrect values, directly compromising vehicle stability control and braking performance. At CVJoint24, we offer the most dependable options for your Superb, giving you total peace of mind that your replacement part matches original equipment standards. Our focus is on supplying components built to withstand European roads, winter conditions and road grit, which are the primary causes of premature wear.

What does an ABS ring do on a Skoda Superb 1.8 TSI?

The ABS ring on your Skoda Superb 1.8 TSI acts as an essential data source for the engine control unit (ECU). Mounted on the CV joint, it rotates at the exact speed of the wheel. A magnetic sensor sits right next to the ring's teeth or magnetic track. As the wheel turns, an electrical pulse is generated every time a tooth passes the sensor. The ABS system relies on this data to detect whether a wheel is about to lock up under heavy braking. If the system detects a wheel rotating slower than the others, it modulates brake pressure to prevent skidding and maintain steering control. For a capable car like the Superb 1.8 TSI, this precision is vital, especially at motorway speeds or on slippery road surfaces where power delivery and braking response must remain perfectly synchronised to protect everyone on board.

Common signs of wear

The most frequent sign that an ABS ring on your Skoda Superb 1.8 TSI is failing is an illuminated ABS warning light on your dashboard. This typically happens when the ring has cracked or become so corroded that the sensor can no longer read the pulses cleanly. Another obvious symptom is feeling vibrations or pulsing through the brake pedal even during light braking on dry tarmac, caused by the system mistakenly reading a wheel lock-up. You may also see the electronic stability programme (ESP) warning light flicker or intervene unpredictably. Because the ABS ring sits in an exposed position near the wheel hub, it is prone to corrosion. As rust develops underneath the ring, it expands and eventually cracks it. If you notice any of these warnings, inspect the rings immediately to avoid compromising critical safety functions and lengthening your stopping distances.

Choosing the right ABS ring

When purchasing a replacement ABS ring for your Skoda Superb 1.8 TSI, keep a few technical details in mind. The tooth count and inner diameter are the most critical measurements. Even if parts look identical at first glance, slight dimension discrepancies will prevent proper fitment or cause sensor errors. On the Skoda Superb, specifications can vary according to model year and whether the vehicle is front-wheel drive or four-wheel drive. The most reliable way to find the correct fit is to filter by your car's make, model and engine variant in our catalogue. This selects verified components tailored to your exact engine and chassis specification. Choosing a dedicated ring from our range eliminates guesswork, ensuring smooth installation and immediate, accurate system calibration after fitting.

Related parts to inspect

Please also check these exact pages for the same vehicle when working with an ABS ring:

When one drivetrain component shows signs of wear, neighbouring parts on the vehicle often warrant an inspection as well. Comparing these exact pages for the Skoda Superb 1.8 TSI makes it easier to diagnose whether an issue stems solely from the ABS ring or another related driveline part.

This is especially important on models where vibrations, play and unusual noises can transfer symptoms across several driveline components. Checking related categories helps ensure you replace the root cause rather than overlooking an adjacent part affecting the same problem.

Inspecting the complete drivetrain at the same time saves workshop hours and ensures your Skoda remains dependable mile after mile. Addressing minor wear early prevents far more costly repairs down the road.

Why shop at CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders across the EU from our central warehouse in Helsingborg, Sweden. We are passionate about engineering precision, offering a curated selection of car parts that meet the rigorous standards demanded by drivers. When you buy an ABS ring for your Skoda Superb 1.8 TSI from us, you receive a dependable spare part supported by expert advice and our precise fitment guarantee. We value your time, providing swift EU delivery and an easy-to-use search by make, model and engine so you always order the right component the first time. Count on our dedication to quality, durability and accurate fitment for your vehicle's drivetrain.

Frequently asked questions about ABS rings for Skoda Superb 1.8 TSI

How do I know if the ABS ring on my Skoda Superb 1.8 TSI is damaged?

The most common signs are the ABS warning light coming on, feeling vibrations or pulsation in the brake pedal during normal braking, or the stability control system indicating a fault.

Can you replace just the ABS ring on a Skoda Superb?

Yes, on many Skoda Superb models it is possible to replace only the ABS ring by pressing a new one onto the existing CV joint, provided the joint itself is otherwise in good condition.

What causes an ABS ring to crack?

The primary cause is corrosion. Rust builds up beneath the ring on the CV joint, exerting pressure that eventually causes the hardened steel ring to split or crack.

Do I need to clear fault codes after replacing an ABS ring?

Often the ABS warning light goes out automatically after driving a short distance once the system receives correct signals again, but occasionally a reset with a diagnostic scan tool may be required.

Is it difficult to replace an ABS ring yourself?

It requires dismantling the CV joint from the wheel hub, making it a job of moderate difficulty. Suitable tools and technical knowledge of braking and suspension systems are essential.

How many teeth should the ABS ring have for my Superb 1.8 TSI?

The tooth count can vary depending on the exact model year and chassis. The most reliable way to find the correct specification is to select your vehicle's make, model and engine on our website.