ABS rings for Toyota Altis Saloon
Looking for a high-quality ABS ring for your Toyota Altis Saloon? At CVJoint24, you will find precision-engineered parts that ensure your braking system works at its best. A cracked or...
Products for ABS rings for Toyota Altis Saloon
- Position: Front
- ABS teeth: 48
- Inner diameter: 70 mm
- Outer diameter: 80 mm
- Width: 9 mm
ABS rings for Toyota Altis Saloon
The ABS ring is a small yet crucial component in your car's safety system. For a Toyota Altis Saloon, it is vital that this part works flawlessly so that the anti-lock braking system can react correctly in an emergency. As part of the overall drivetrain and braking system, the ABS ring is subjected to severe stress, particularly in harsh European climates where road salt, moisture and temperature changes accelerate corrosion. At CVJoint24, we focus on supplying parts that meet high standards and keep your Toyota Altis Saloon in peak condition.
Replacing a damaged ABS ring in good time is not just a matter of safety, but also of economics. A faulty ring can eventually affect other parts of the braking system and lead to unnecessary repair costs. By choosing a vehicle-specific ring from a specialist, you ensure that your car maintains its original safety performance and that fitting proceeds without complications.
What does the ABS ring do on a Toyota Altis Saloon?
The ABS ring, often called a reluctor ring or tone ring, is mounted on the CV joint and rotates at the same speed as the wheel. Its main job is to act as a reference point for the ABS sensor. The ring is engineered with a specific number of teeth that generate a magnetic pulse as they pass the sensor. This information is sent directly to the car's engine control unit (ECU), which calculates the rotational speed of each wheel in real time. For your Toyota Altis Saloon, this means the system can immediately detect if a wheel is about to lock up during braking.
If the control unit detects that one wheel is rotating more slowly than the others, it modulates the braking pressure to that specific wheel. This allows you to maintain steering control even under hard braking on slippery surfaces. Without an intact ABS reluctor ring, the sensor cannot read wheel speed accurately, causing the entire ABS system to shut down to prevent unintended interventions.
Common signs of wear
The most obvious sign that an ABS ring on your Toyota Altis Saloon has failed is the ABS warning light illuminating on the dashboard. This frequently happens when the ring has cracked or when corrosion means the teeth no longer generate a clean signal. Another common symptom is the brake pedal pulsating or vibrating under perfectly normal braking at low speeds, even on dry, smooth tarmac. This occurs because the cracked ring gives a false signal that the wheel has locked.
Over time, rust can creep beneath the ring and cause rust-jacking, expanding the ring until it splits or rubs against the sensor. If you hear a scraping noise from the wheel arch or notice the electronic stability control (VSC/TRC) intervening for no reason, you should inspect your ABS rings straight away. Ignoring these symptoms can leave you without functioning ABS support when you need it most.
How to choose the correct ABS ring
When it is time to buy a new ABS ring, it is essential to pay close attention to specifications. For the Toyota Altis Saloon, variations can exist depending on the production year and specific chassis numbers. The most important details to check are the number of teeth on the ring and its internal diameter. A ring with the wrong tooth count will send incorrect speed data to the car's computer, meaning the warning light will stay on even after fitting.
The simplest and most reliable way to find the right part is to select your car's make, model and engine in our vehicle selector. We match our products to vehicle manufacturer data to ensure you receive a part with an exact fit. Before installation, we also recommend thoroughly cleaning the seating surface on the CV joint, as the slightest unevenness or rust scale can cause the new ring to crack or sit out of true when pressed on.
Related parts to check
Feel free to check these related pages for the same vehicle when working on an ABS ring:
When a drivetrain component shows signs of wear, neighbouring parts on the same car often require inspection as well. Comparing these exact pages for the Toyota Altis Saloon makes it easier to determine whether the issue lies purely with the ABS ring or another related drivetrain component.
This is particularly relevant on models where vibrations, play and unwanted noises can transfer symptoms across several parts in the same driveline. A quick check of related categories reduces the risk of replacing the right type of part while overlooking an adjacent component that contributes to the same fault.
By taking a proactive approach and replacing worn CV boots or tired constant velocity joints alongside the ABS ring, you save both time and money on future workshop visits. A well-maintained drivetrain ensures quieter running and a safer driving experience.
Why buy from CVJoint24?
CVJoint24 is the international shop of a Swedish driveline specialist, sending parts across the EU from our central warehouse in Helsingborg, Sweden. We stand out from generic car parts retailers through our dedicated focus, in-depth expertise and exact fitments. When you purchase an ABS ring for your Toyota Altis Saloon from us, you can rest assured you are getting a high-quality product engineered to handle tough conditions. We offer a fitment guarantee so you can order with complete confidence when selecting your vehicle details.
Our goal is to help you pick the right part first time and have it delivered quickly, minimising the time your car spends off the road. We combine specialist technical knowledge with a comprehensive catalogue and competitive pricing, making us the natural choice for both DIY mechanics and professional garages looking for the best for their Toyota.
Frequently asked questions about ABS rings for Toyota Altis Saloon
How do I know if the ABS ring is damaged on my Toyota Altis Saloon?
The most common symptoms are an illuminated ABS warning light, a pulsating brake pedal at low speeds on dry surfaces, or stability control warnings. A visual inspection will often reveal cracks or severe corrosion.
Can I replace just the ABS ring or do I have to replace the entire CV joint?
On most Toyota Altis Saloon models, you can easily replace just the ABS ring if the CV joint is otherwise in good condition. This is a cost-effective solution compared with replacing the complete joint.
Why does the ABS ring crack?
The most common cause is corrosion. Rust builds up between the CV joint and the ring, creating outward pressure that eventually causes the hardened steel ring to crack.
Will a cracked ABS ring cause an MOT or roadworthiness test failure?
Yes, if the ABS warning light is lit or the system is malfunctioning, the car will fail its roadworthiness inspection. It is classed as a major safety defect.
How many teeth does an ABS ring for the Toyota Altis Saloon have?
The number of teeth varies depending on the specific model year and engine variant. It is therefore essential to filter by your car's make, model and engine to find the exact specification for your vehicle.
Do I need special tools to fit a new ABS ring?
No complex specialist tools are required, but it is crucial to clean the mounting surface thoroughly. The ring can often be gently heated so that it expands and slips into position more easily.