ABS rings for Volvo 850 2.4 AWD

Looking for an ABS sensor ring for an all-wheel-drive Volvo 850 2.4 AWD? Here you will find the specific ABS ring engineered for this rare 1996 estate. This section provides an immediate...

Products for ABS rings for Volvo 850 2.4 AWD

2 products
1 - 2 of 2
Item no.:0304480
  • ABS teeth: 48
  • Inner diameter: 72 mm
  • Outer diameter: 81 mm
  • Width: 8,35 mm
Item no.:636860
  • Position: Rear

ABS rings for Volvo 850 2.4 AWD

The Volvo 850 2.4 AWD is an iconic model that introduced all-wheel drive to Volvo's passenger car line-up during the mid-1990s. For this advanced drivetrain to function properly, every sensor and mechanical component must remain in top condition. One of the most critical, yet frequently overlooked, components is the ABS ring. This small but vital part is mounted directly onto the CV joint, enabling the anti-lock braking system to measure wheel speeds accurately. On a Volvo 850 2.4 AWD, these rings endure severe strain, particularly during harsh European winters where road salt and moisture accelerate corrosion.

Sourcing the correct replacement part specifically for the AWD version of the 850 range is essential, as the drivetrain differs notably from front-wheel-drive variants. At CVJoint24, we specialise specifically in driveline components to ensure you receive a part manufactured strictly to original equipment specifications. By selecting a vehicle-specific ABS ring, you eliminate installation headaches and avoid future sensor faults.

What does the ABS ring do on a Volvo 850 2.4 AWD?

The ABS ring, also called an ABS reluctor ring or sensor ring, forms part of an inductive measuring system. As the wheel rotates, the teeth of the ring pass a stationary ABS sensor. This movement generates an electrical signal that is sent directly to the car's control unit. The ECU processes this data to determine whether a wheel is locking under braking or spinning under acceleration. On an all-wheel-drive car such as the Volvo 850 2.4 AWD, this information is even more critical, as the system also influences how power is distributed between the wheels.

If the ring suffers damage, the sensor signal becomes irregular or drops out entirely. The ABS system can no longer operate correctly, triggering a shutdown of vital safety features. A functional ABS ring is therefore not merely a matter of clearing a dashboard warning light; it is a fundamental component of the vehicle's active safety and stability control systems.

Common signs of wear and failure

The most frequent failure mode for an ABS ring on a Volvo 850 is corrosion. Rust builds up underneath the ring, causing it to expand outward and eventually crack. A cracked ring changes the spacing between teeth, deceiving the sensor into detecting an abrupt change in wheel speed. A telltale symptom is unwanted ABS activation during gentle, low-speed braking just before the car comes to a complete standstill. You may feel a distinct pulsing or vibration through the brake pedal, even on dry, smooth tarmac.

Another common sign is the ABS warning light illuminating on the instrument cluster. Initially, this light may flicker intermittently before remaining permanently lit. If you notice unusual brake behaviour or dashboard warnings, inspect the ABS reluctor rings visually without delay. You will typically spot a visible hairline crack or heavy rust scaling that has rounded off the precision-machined teeth.

How to choose the correct ABS ring

When purchasing a replacement ABS ring for your Volvo 850 2.4 AWD, it is vital to verify the tooth count and internal diameter. Although many Volvo models share running gear, the AWD variants feature unique drivetrain specifications compared to front-wheel-drive editions. The most reliable way to select the right part is to choose your exact make, model and engine variant in our catalogue. This filters out incompatible components and presents parts technically verified for your specific driveline.

We always advise thoroughly cleaning and de-rusting the mounting seat on the CV joint before fitting the new ring. Any residual corrosion beneath the ring will exert uneven pressure and cause premature cracking. Selecting a premium ring with durable anti-corrosion surface treatment is an essential investment in your car's longevity and road safety.

Related parts to inspect

We recommend also checking these related categories for the same vehicle when working on the ABS ring:

Whenever a drivetrain component shows signs of wear, neighbouring parts on the same car warrant a close look. By comparing these exact pages for the Volvo 850 2.4 AWD, you can determine whether a fault lies solely with the ABS ring or stems from an adjacent transmission component.

This is especially important on models where vibrations, play and mechanical noises can travel across the drivetrain. A quick check of associated assemblies ensures you do not replace one part while leaving a worn adjoining component behind.

Rectifying minor issues together saves both workshop time and money over the long term. A severely worn constant velocity joint with excess play or harsh vibrations can quickly damage a newly installed ABS ring.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders across the EU from our central warehouse in Helsingborg, Sweden. We concentrate exclusively on driveline and transmission components, giving us comprehensive technical expertise in classic models like the Volvo 850 2.4 AWD. Our goal is to ensure you get the right part on the first attempt, which is why our catalogue is carefully structured around precise vehicle specifications. We stock high-grade spare parts that meet or exceed original equipment standards so that your vehicle can cover many thousands of kilometres reliably.

With swift international delivery and knowledgeable customer support ready to answer technical queries, we are the trusted partner for DIY mechanics and professional garages alike. Combine specialised expertise with our carefully curated inventory to keep your Volvo running smoothly. Order with total confidence from driveline specialists who know Volvo engineering inside out.

Frequently asked questions about ABS rings for Volvo 850 2.4 AWD

Does the same ABS ring fit the Volvo 850 AWD as the front-wheel drive model?

This can vary depending on the model year and CV joint design. The most reliable way to check is to select your car's make, model and engine in our search tool to ensure you get the exact specification.

Why is the brake pedal pulsating at low speeds on my Volvo 850?

This is a classic symptom of a cracked ABS ring. The crack causes an incorrect gap between the teeth, deceiving the ABS system into detecting a locked wheel even during gentle braking.

Do I have to replace the entire CV joint if the ABS ring is broken?

No, on the Volvo 850 2.4 AWD you can usually replace just the ABS ring. It is a considerably more affordable solution than renewing the complete CV joint, provided the joint itself is otherwise in good condition.

How many teeth should an ABS ring for a Volvo 850 2.4 AWD have?

Most models in the 850 series use rings with 48 teeth, but variations can occur. Always check your vehicle's exact requirements via our selector before placing your order.

Can I drive with a cracked or broken ABS ring?

It is not recommended. A damaged ring can cause the ABS system to act unpredictably or disengage entirely, compromising safety during emergency braking and resulting in an MOT or roadworthiness test failure.

What is the best way to fit a new ABS ring?

The ring is gently pressed or heated into place on the CV joint. It is essential that the contact surface is thoroughly cleaned of rust and debris so the ring seats squarely and does not crack again.