ABS rings for Volvo S80 2.4 D

We offer reluctor rings and ABS rings for the Volvo S80 2.4 D. Our range for this front-wheel-drive saloon is carefully selected. To ensure you receive the right part, select your exact...

Products for ABS rings for Volvo S80 2.4 D

4 products
1 - 4 of 4
Item no.:635229
  • Position: Rear
Item no.:0370246
  • ABS teeth: 48
  • Inner diameter: 72 mm
  • Outer diameter: 81 mm
  • Width: 8,35 mm
Item no.:633523
  • Position: Rear
Item no.:331628
  • ABS teeth: 49
  • Inner diameter: 72 mm
  • Outer diameter: 82 mm

ABS rings for Volvo S80 2.4 D

Maintaining the braking system on a Volvo S80 2.4 D is vital for both safety and driving comfort. The ABS ring, also known as an ABS reluctor ring, is a small but critical component in the vehicle's anti-lock braking system. For the 2.4 D variant of the S80 in particular, it is essential to choose a ring engineered to withstand the stresses of everyday driving. Because the Volvo S80 is renowned for its longevity, it demands spare parts that match original-equipment standards. We provide ABS rings specifically tailored to meet the technical specifications of your Volvo, ensuring trouble-free installation and reliable, long-lasting performance in all weather conditions.

What does the ABS ring do on a Volvo S80 2.4 D?

The ABS ring is mounted on the CV joint and sends signals to the vehicle's ABS sensor. As the wheel turns, the sensor reads the teeth on the ring to calculate rotational speed. If an ABS ring cracks or corrodes, the sensor can no longer read the speed accurately, preventing the safety system from functioning properly. On a Volvo S80 2.4 D, this system is integrated with the stability control, meaning an incorrect signal can affect more than just basic braking. By keeping these rings in good order, you ensure that the car's intelligent safety systems intervene correctly in an emergency or on slippery surfaces, which is fundamental to the car's handling.

Common signs of wear

The most frequent sign that an ABS ring on your Volvo S80 2.4 D has failed is the ABS warning light illuminating on the dashboard. You may also notice the ABS kicking in during normal braking at low speeds, which is felt as a pulsating vibration through the brake pedal. This is usually caused by a cracked ring due to corrosion, which alters the gap between the teeth and misleads the sensor. If you notice these symptoms, it is important to take action promptly. In the worst cases, a cracked ring can cause the entire system to shut down, significantly reducing driving safety. Inspecting the condition of your constant velocity joints regularly helps you detect corrosion on the rings before serious issues arise on the road.

How to choose the correct ABS ring

To choose the correct ABS ring for your Volvo S80 2.4 D, simply select your car's make, model and engine variant in our store. Rings vary depending on the model year and specific drivetrain, and both the tooth count and inner diameter must match precisely for the sensor to read the signal correctly. Installing a ring with the wrong number of teeth will cause persistent fault codes and an inactive safety system. We always recommend checking the condition of your existing ring and comparing specifications if you are unsure. We are always on hand to help you find the right part, and our fitment guarantee ensures the component you order fits your vehicle perfectly without any installation hassle.

Related parts to inspect

You can also check these exact pages for the same vehicle when working on your ABS ring:

When a drivetrain component shows signs of wear, neighbouring parts on the vehicle often require inspection as well. By comparing these exact pages for the Volvo S80 2.4 D, it becomes easier to determine whether the fault lies strictly with the ABS ring or another related component in the transmission system.

This is particularly relevant on models where vibrations, play and noises can transfer symptoms across multiple drivetrain components. A quick check of related categories reduces the risk of replacing the correct component type while overlooking an adjacent part that contributes to the same problem.

Replacing worn components at the same time saves both time and money in the long run, avoiding the need to dismantle the suspension multiple times for related repairs.

Why buy from CVJoint24?

CVJoint24 is your Swedish driveline specialist, supplying all drivetrain components across Europe. We combine in-depth technical expertise with a carefully curated range to provide the finest solutions for your Volvo S80 2.4 D. When you shop with us, you receive not just high-quality car parts, but also the confidence backed by our fitment guarantee and expert support. We understand how crucial it is to get your vehicle back on the road promptly, which is why we dispatch stock items swiftly across the EU. With our focus on durability, competitive pricing and personal service, we are the trusted choice for drivers who demand the very best for their vehicle's drivetrain. Choose the right part first time and experience the difference of a dedicated specialist prioritising your car's reliability.

Frequently asked questions about ABS rings for Volvo S80 2.4 D

How do I know if the ABS ring fits my Volvo S80 2.4 D?

The most reliable way is to select your car's make, model and engine variant in our search filter. This ensures you only see the car parts compatible with your specific vehicle.

Can I replace just the ABS ring, or do I need to replace the entire CV joint?

On most Volvo S80 models, you can easily replace just the ABS ring if the CV joint is otherwise in good condition. This is a very cost-effective alternative to replacing the complete joint.

Why do ABS rings crack on Volvo models?

The most common cause is corrosion forming underneath the ring. As rust expands, it exerts outwards pressure from beneath, eventually causing the metal ring to snap.

What tools are needed to replace an ABS reluctor ring?

You generally need standard tools to remove the wheel, release the drive shaft from the wheel hub, and possibly a puller or a hammer and drift to remove the old ring.

Will a cracked ABS ring cause an MOT or roadworthiness test failure?

Yes, if the ABS warning light is illuminated or the system is malfunctioning, the car will fail its roadworthiness inspection because the anti-lock brakes are an essential safety system.

How quickly do you dispatch an ABS ring for a Volvo S80?

We aim for fast dispatch from our central warehouse for all orders placed before our daily cut-off time, so you can repair your car without unnecessary delay.