Audi 100 1.8

Welcome to your driveline specialist for the Audi 100 1.8. We offer a carefully selected range of high-quality drivetrain components engineered to keep your car running smoothly. Whether...

Products for Audi 100 1.8

15 products
1 - 15 of 15
Item no.:0557955
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 56 mm
  • Outer splines: 26
  • ABS teeth: 46
Item no.:0508466
  • Position: Outer
  • Inner splines: 25
  • Splines wheel side: 26
  • Seal diameter: 56 mm
  • ABS teeth: 96
Item no.:0579985
  • Position: Outer
  • Inner splines: 25
  • Splines wheel side: 26
  • Seal diameter: 56 mm
  • ABS teeth: 45
Item no.:0519478
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 60 mm
  • Outer splines: 38
  • ABS teeth: 45
Item no.:0340368
  • ABS teeth: 45
  • Inner diameter: 64 mm
  • Outer diameter: 74 mm
  • Width: 8,1 mm
Item no.:0311756
  • ABS teeth: 96
  • Inner diameter: 64 mm
  • Outer diameter: 73 mm
  • Width: 8,1 mm
Item no.:0684186
Item no.:7309707
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 94 mm
  • Total length: 32 mm
  • Joint diameter: 94 mm
Item no.:3469642
  • Position: Inner
  • Inner splines: 25
  • Outer diameter: 100 mm
Item no.:311784
  • Position: Front
  • Splines wheel side: 26
  • Total length: 661 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:0605863
  • Total length: 122 mm
Item no.:0981338
  • Inner diameter: 24 mm
  • Outer diameter: 40 mm
Item no.:335882
  • ABS teeth: 45
  • Inner diameter: 64 mm
  • Outer diameter: 74 mm
  • Width: 8,1 mm
Item no.:0623776
  • Total length: 113 mm
Item no.:0637056
  • Total length: 89 mm

Audi 100 1.8 drivetrain parts

The Audi 100 1.8 is a classic model where the drivetrain plays a crucial role in both ride comfort and safety. As the owner of this specific engine variant, you know that the right spare parts are essential for ensuring a long service life. At CVJoint24, we stock components tailored specifically for the Audi 100 1.8. Our range covers everything from complete drive shafts to smaller yet vital components such as CV boots and ABS rings. Maintaining the drivetrain on an Audi 100 demands precision, and as Swedish driveline specialists, we understand the technical demands placed on the power transmission in these cars. By choosing the right parts from the outset, you prevent unnecessary wear on the gearbox and suspension. We offer in-depth category knowledge to help you find the correct solution, whether you are tackling a minor repair or a comprehensive driveline overhaul.

How the drivetrain is engineered on the Audi 100 1.8

The drivetrain on an Audi 100 1.8 is designed to transfer engine torque smoothly to the front wheels. The system relies primarily on a gearbox that transmits power outward via drive shafts. Each drive shaft is fitted with two joints: an inner joint at the gearbox and an outer joint at the wheel hub. The outer joint is especially critical, as it must accommodate suspension travel and steering angles simultaneously while transferring drive. To protect these precision parts, flexible rubber CV boots packed with specialised grease are fitted. On the Audi 100 1.8, the ABS ring is often mounted directly onto the outer CV joint, making it an integral element of the car's braking and safety systems. Understanding this setup is fundamental when troubleshooting issues. A sound drivetrain ensures minimal vibration and refined, quiet running—true hallmarks of Audi engineering from this era.

Common faults and symptoms

There are several clear warning signs that the drivetrain on your Audi 100 1.8 is worn. One of the most frequent symptoms is a clicking or knocking sound on full lock at low speeds, typically indicating a failing outer CV joint. If you experience vibrations through the steering wheel or the entire car under acceleration, an unbalanced or worn inner CV joint or drive shaft is often to blame. Another critical warning sign is an illuminated ABS warning light or premature ABS activation under normal braking; this is frequently caused by a cracked or corroded ABS reluctor ring. You should also inspect the CV joint boots regularly. If a boot tears, grease escapes and grit enters, leading to rapid constant velocity joint failure. By catching these early warning signs, you can save significant money by replacing individual components before they cause collateral damage elsewhere in the driveline.

Common parts to replace on the Audi 100 1.8

For the Audi 100 1.8, certain components require regular inspection to keep the car reliable on the road. Here are the core categories available in our range for this model:

  • Drive shaft Audi 100 1.8: A complete assembly ideal when both inner and outer joints are worn or the shaft itself is bent.
  • Outer CV joint Audi 100 1.8: The primary wear part, handling the highest loads during steering and acceleration.
  • Inner CV joint Audi 100 1.8: Accommodates length changes along the driveshaft during suspension travel.
  • CV boots Audi 100 1.8: The most cost-effective yet vital protection for your constant velocity joints.
  • ABS ring Audi 100 1.8: A crucial sensor ring that ensures your car's safety and braking systems function properly.

We supply various outer and inner CV joints to cater for the different technical revisions used on the Audi 100 1.8. It is vital to select the right part based on spline counts and physical dimensions, as these can vary depending on model year and specification.

How to find the right part for your Audi 100 1.8

Navigate to the correct subcategory for your Audi 100 1.8:

When diagnosing driveline faults on your car, choosing the exact product group is the best place to start. By exploring the specific categories for the Audi 100 1.8, you can easily distinguish between drive shaft, CV joint or prop shaft issues and continue to the section that best matches your symptoms and fitment needs.

Finding the exact replacement part for an Audi 100 1.8 can occasionally be tricky due to running production changes over the vehicle's lifespan. The most dependable method is to select your car's make, model and engine variant in our store. This filters the catalogue directly to parts that match your vehicle. We always advise checking technical specifications as well, such as internal and external spline counts on the CV joint, along with the seal diameter. Because we stock a comprehensive range—including CV boots and ABS rings for this model—precision when ordering is key. If you are unsure which component matches your setup, you can rely on our expertise. Our product catalogue is carefully structured to prevent ordering mistakes. By comparing your existing parts with our detailed product descriptions and technical diagrams, you can be sure of ordering the right part first time, saving both workshop downtime and unnecessary expense.

Why shop at CVJoint24

When you choose CVJoint24 for your Audi 100 1.8 drivetrain parts, you are dealing with a dedicated Swedish driveline specialist. We concentrate exclusively on driveline and power transmission components, giving us specialist knowledge and depth of stock that general motor factors rarely match. We know you want your vehicle back on the road quickly, which is why we dispatch stocked items rapidly across the EU from our central warehouse. Backed by our fitment guarantee, you can order with absolute confidence, provided your car matches the data in our vehicle selector. Our mission is to supply premium-quality spare parts at competitive prices, backed by technical customer support that understands the products inside out. Whether you are a DIY mechanic or running a professional garage, we are your trusted partner for all Audi 100 1.8 driveline requirements.

Frequently Asked Questions about Drivetrain Parts for Audi 100 1.8

How do I know if my Audi 100 1.8 needs a new drive shaft?

The most common signs are heavy vibrations under acceleration or a persistent clicking noise when cornering. If the vibrations remain despite balanced tyres, the drive shaft or its joints are often the cause.

Do all CV joints fit every Audi 100 1.8?

No, there can be differences in the number of splines (teeth) and dimensions depending on the model year. Always select your car's exact make, model and engine to filter out the correct parts.

Why is it important to replace a damaged CV boot immediately?

A split CV boot allows grease to escape while letting dirt and water penetrate the CV joint. This leads to rapid wear and costly failure of the entire joint if not addressed immediately.

Can I replace just the ABS ring on my Audi 100 1.8?

Yes, if the CV joint itself is in good condition, you can replace just the ABS ring. We stock dedicated ABS rings for the Audi 100 1.8 to enable a more economical repair.

What is included in your CV joint kits?

Our kits typically contain the CV joint itself, a model-specific CV boot, premium grease, circlips and the necessary fitting accessories for a complete replacement.

How quickly are parts delivered for my Audi 100?

We offer fast delivery across the EU on all in-stock items, meaning you normally receive your parts within just a few working days of placing your order.