Audi 100 2.0 CAT

Spare parts and drivetrain components for the Audi 100 2.0 CAT. Verify fitment by selecting your car's make, model and engine before ordering.

Products for Audi 100 2.0 CAT

21 products
1 - 21 of 21
Item no.:0512213
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 56 mm
  • Outer splines: 26
  • ABS teeth: 46
Item no.:0563182
  • Position: Outer
  • Inner splines: 25
  • Splines wheel side: 26
  • Seal diameter: 56 mm
  • ABS teeth: 96
Item no.:0532974
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 60 mm
  • Outer splines: 38
  • ABS teeth: 45
Item no.:0329345
  • ABS teeth: 45
  • Inner diameter: 64 mm
  • Outer diameter: 74 mm
  • Width: 8,1 mm
Item no.:0393673
  • ABS teeth: 96
  • Inner diameter: 64 mm
  • Outer diameter: 73 mm
  • Width: 8,1 mm
Item no.:337002
  • ABS teeth: 45
  • Inner diameter: 64 mm
  • Outer diameter: 74 mm
  • Width: 8,1 mm
Item no.:0663255
  • Total length: 113 mm
Item no.:0698335
  • Total length: 89 mm
Item no.:216709
  • Position: Front right
  • Splines wheel side: 26
  • Total length: 640 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:212782
  • Position: Front right
  • Splines wheel side: 26
  • Total length: 640 mm
  • Diameter 1: 90 mm
  • ABS teeth: 45
Item no.:212912
  • Position: Front right
  • Splines wheel side: 26
  • Total length: 640 mm
  • Diameter 1: 90 mm
  • ABS teeth: 96
Item no.:118237
  • Position: Front left
  • Splines wheel side: 26
  • Total length: 693 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:115786
  • Position: Front left
  • Splines wheel side: 26
  • Total length: 693 mm
  • Diameter 1: 90 mm
  • ABS teeth: 45
Item no.:119400
  • Position: Front left
  • Splines wheel side: 26
  • Total length: 693 mm
  • Diameter 1: 90 mm
  • ABS teeth: 96
Item no.:211673
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 635 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:219376
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 635 mm
  • Joint diameter: 90 mm
  • ABS teeth: 45
Item no.:113944
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 598 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:112901
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 598 mm
  • Joint diameter: 90 mm
  • ABS teeth: 45
Item no.:0441178
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 108 mm
Item no.:0627016
  • Total length: 122 mm
Item no.:0986399
  • Inner diameter: 24 mm
  • Outer diameter: 40 mm

Audi 100 2.0 CAT drivetrain

The Audi 100 2.0 CAT is a classic model that requires diligent maintenance to retain its renowned reliability and driving comfort. The drivetrain is the core mechanical assembly responsible for transferring engine power to the wheels, and for a car with a few years behind it, ensuring these components are in peak condition is vital. When discussing the Audi 100, it is essential to recognise that the 2.0 CAT version has specific technical requirements that set it apart from other engine variants. At CVJoint24, we possess in-depth expertise regarding these finer details and supply a range tailored to meet the demands of an Audi from this era. Investing in the correct spare parts not only extends the vehicle's lifespan, but also guarantees a safe driving experience for you and your passengers.

How the drivetrain is engineered on the Audi 100 2.0 CAT

The layout of the drivetrain on the Audi 100 2.0 CAT is a robust design engineered for front-wheel drive. Power from the four-cylinder engine passes through the gearbox and is distributed to the front wheels via two drive shafts. Each driveshaft is equipped with two critical articulating points: the inner and outer CV joint. The inner joint mounts to the gearbox and allows the shaft to move up and down in tandem with the car's suspension. The outer joint sits at the wheel hub and is more complex, as it must transmit power while the wheels are steered. For cars equipped with anti-lock brakes, an ABS ring for the Audi 100 2.0 CAT is also fitted onto the outer constant velocity joint. This reluctor ring supplies the necessary pulses to the vehicle's ECU so braking force can be modulated effectively under heavy braking.

Common faults and symptoms

There are several clear signs that drivetrain components on your Audi 100 2.0 CAT are wearing out. One of the classic symptoms is a rhythmic clicking or knocking noise from the front suspension during sharp turns, which is almost invariably caused by a worn outer CV joint on the Audi 100 2.0 CAT. If you experience vibrations travelling through the steering wheel or chassis during acceleration instead, the inner joint may have developed excess play. Another frequent issue is the ABS warning light illuminating on the instrument cluster. This is often caused by a cracked ABS ring due to rust building up underneath, which throws off the sensor gap. Acting promptly on these symptoms is crucial, as a split CV boot allows dirt to enter and grease to escape, quickly destroying the entire joint and leading to complete breakdown at the roadside.

Common parts to replace on the Audi 100 2.0 CAT

To keep your Audi 100 2.0 CAT running smoothly, we have highlighted the most critical car parts that typically need replacing after many kilometres on the road. Our catalogue for this specific model currently includes the following categories:

  • Outer CV joints for Audi 100 2.0 CAT – We stock multiple variants to cover every technical specification.
  • Inner CV joints for Audi 100 2.0 CAT – An essential component to eradicate vibrations under acceleration.
  • ABS rings for Audi 100 2.0 CAT – We provide several versions to guarantee accurate signals to your braking system.

Beyond these primary components, replacing the CV boots is also routine maintenance. A CV joint boot is inexpensive insurance; when intact, it keeps grease inside the joint and road dirt out. When we supply a CV joint kit, it generally includes everything required for a full replacement, including grease, clamps and fitting hardware, making the job straightforward for both DIY mechanics and professional garages.

How to find the right part for your Audi 100 2.0 CAT

Select the correct subcategory for your Audi 100 2.0 CAT:

On a vehicle with several potential drivetrain issues, it is best practice to begin in the correct category straight away. Comparing the exact component sections for the Audi 100 2.0 CAT makes it straightforward to distinguish between faults in the drive shaft, CV joint or propeller shaft, taking you directly to the page that matches your symptoms and fitment.

Identifying the exact replacement part for an Audi 100 2.0 CAT demands precision, as production changes occurred over the vehicle's manufacturing run. The most reliable approach is to select your car's make, model and engine variant in our shop navigation. This filters our catalogue so you only see components suited to your car. However, please note that variations can exist in the spline count on the drive shaft or the diameter of the ABS ring. We always recommend reading the product descriptions carefully and, where necessary, checking dimensions against your old unit before fitting. Our goal is to help you select the right parts first time, saving you both time and unnecessary returns during your repair.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders across the EU from our central warehouse in Helsingborg, Sweden. We stand out from general car parts retailers thanks to our dedicated niche expertise and strict focus on providing parts with an exact fit. Choosing us for your Audi 100 2.0 CAT gives you access to components thoroughly selected to meet or exceed OEM specifications. We provide a dependable fitment guarantee when you choose parts matching your car's exact make, model and engine. With fast dispatch across Europe, we minimise the downtime your car spends on axle stands, while our knowledgeable customer service team is always on hand to assist with technical queries. Shopping with a specialist ensures you receive the correct part, reliable quality and dedicated support throughout, making us the natural choice for Audi owners who value their car's roadworthiness.

Frequently asked questions about Drivetrain for Audi 100 2.0 CAT

How do I know which outer CV joint fits my Audi 100 2.0 CAT?

The best way is to select your vehicle's make, model and engine variant in our store. Also check the number of splines (teeth) on both the inner and outer sides of the joint, as variations can occur depending on the model year.

Why is the ABS warning light on in my Audi 100?

On the Audi 100 2.0 CAT, a cracked or corroded ABS ring is a very common cause. When the ring is damaged, the sensor cannot read wheel speed correctly, triggering a fault code and lighting up the ABS warning light.

Are the CV boot and grease included when I buy a CV joint from you?

Yes, our CV joint kits are supplied complete with the joint itself, a model-specific CV boot, specialised grease, circlips and fitting clips.

What are the symptoms of a worn inner CV joint?

The most common signs are vibrations through the car under acceleration, typically noticeable between 50 and 90 km/h. Unlike outer joints, an inner constant velocity joint rarely produces clicking noises when cornering.

Can I replace just the ABS ring or do I have to replace the complete CV joint?

If the CV joint itself is in good condition with no play or abnormal noises, you can easily replace just the ABS ring on your Audi 100 2.0 CAT.

How quickly do you deliver parts for the Audi 100?

We offer next-day dispatch on most of our in-stock items, meaning you often receive your parts within just a few working days of placing your order.