Audi 50

Welcome to CVJoint24, your Swedish driveline specialist for the Audi 50. We supply a comprehensive selection of premium drivetrain components designed to preserve the reliability and...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Audi 50

13 products
1 - 13 of 13
Item no.:1196911
  • Position: Front left
  • Splines wheel side: 22
  • Total length: 515 mm
  • Joint diameter: 81 mm
  • Joint diameter, gearbox side: 92 mm
Item no.:1192008
  • Position: Front left
  • Splines gearbox side: 92
  • Splines wheel side: 20
  • Total length: 480 mm
  • Joint diameter: 77 mm
Item no.:2139085
  • Position: Front right
  • Splines wheel side: 20
  • Total length: 730 mm
  • Flange diameter: 92 mm
  • Tripod shaft diameter: 39 mm
Item no.:342707
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 78 mm
  • Total length: 32 mm
  • Joint diameter: 92 mm
Item no.:0439943
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 94 mm
  • Total length: 32 mm
  • Joint diameter: 94 mm
Item no.:116676
  • Position: Front left
  • Splines wheel side: 22
  • Total length: 515 mm
  • Joint diameter: 81 mm
  • Joint diameter, gearbox side: 92 mm
Item no.:113359
  • Position: Front left
  • Splines gearbox side: 92
  • Splines wheel side: 20
  • Total length: 480 mm
  • Joint diameter: 77 mm
Item no.:2172227
  • Position: Front right
  • Splines wheel side: 20
  • Total length: 730 mm
  • Flange diameter: 92 mm
  • Tripod shaft diameter: 39 mm
Item no.:341765
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 78 mm
  • Total length: 32 mm
  • Joint diameter: 92 mm
Item no.:0491687
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 94 mm
  • Total length: 32 mm
  • Joint diameter: 94 mm
Item no.:113349
  • Position: Front left
  • Splines gearbox side: 92
  • Splines wheel side: 20
  • Total length: 480 mm
  • Joint diameter: 77 mm
Item no.:2133370
  • Position: Front right
  • Splines wheel side: 20
  • Total length: 730 mm
  • Flange diameter: 92 mm
  • Tripod shaft diameter: 39 mm
Item no.:345568
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 94 mm
  • Total length: 32 mm
  • Joint diameter: 94 mm

Audi 50 drivetrain parts

The Audi 50 is an iconic small car that laid the groundwork for decades of success across the German automotive group. Maintaining the drivetrain on such a classic demands precision, expertise and, above all, the right car parts. At CVJoint24, we understand the importance of preserving the car's original driving feel and reliability by supplying components that meet or exceed original specifications. Our range for the Audi 50 has been carefully curated to address the specific needs that arise as the mileage mounts or time takes its toll on transmission components. With dedicated parts for this classic model, we provide specialised coverage across Europe.

We focus on the components most critical for transferring power from the engine to the wheels smoothly, without losses, vibrations or noises. For a car like the Audi 50, where driving pleasure stems from lightweight, direct mechanicals, a properly functioning drivetrain is vital. Choosing the correct spare parts protects not only your car’s dependability but also its long-term value as a collector's item. As a Swedish driveline specialist shipping across the EU from our Helsingborg warehouse, we take pride in delivering exactly what is needed to keep these classic vehicles running reliably on European roads.

How the drivetrain is built on the Audi 50

The Audi 50 drivetrain layout is an early and highly efficient example of front-wheel drive paired with a transverse engine. This innovative configuration maximised interior room within a very compact footprint. The setup consists primarily of a manual gearbox that routes torque through two drive shafts out to the front wheels. Each driveshaft is fitted with two joints: an inner CV joint bolted directly to the gearbox output flanges, and an outer CV joint located at the wheel hub. This design accommodates both steering angles and suspension travel while delivering a smooth, uninterrupted flow of power.

Because the Audi 50 is a light car with straightforward yet sturdy mechanicals, the main long-term issues tend to be wear inside the joint internals or dried-out rubber CV boots. Original materials were well engineered, but after decades on the road, replacing complete assemblies is often necessary to restore factory balance. Understanding the relationship between the gearbox output shafts and the wheel hub splines is essential when selecting replacement parts during a rebuild. A properly functioning drivetrain also relieves strain on related components such as engine mounts and wheel bearings, extending the car's overall lifespan.

Common faults and symptoms

When driveline components begin to fail on an Audi 50, clear symptoms usually emerge, and addressing them promptly helps avoid secondary damage. The most frequent sign of a worn outer constant velocity joint is a rhythmic clicking or knocking noise that becomes pronounced under full steering lock during acceleration, such as when navigating a tight turn or junction. If the fault lies within the inner section of the driveline, you will typically feel vibrations through the cabin under load, particularly when accelerating between 50 and 80 km/h. This is usually caused by pitting or grooving on the tracks of the Audi 50 inner CV joint, creating an imbalance that resonates throughout the car.

Another critical warning sign that must never be overlooked is grease splattered around the wheel arch or inner rim. This almost invariably points to a torn or cracked CV boot. Once the boot splits, road dirt, water and grit penetrate the joint while essential lubricating grease is thrown out, leading to rapid joint destruction from friction and corrosion. Regularly checking the rubber boots is your best safeguard against expensive repairs. If you notice the car pulling to one side under power or hear a droning, grinding noise, a drive shaft may be nearing complete failure.

Common parts to replace on the Audi 50

Within our range for the Audi 50, we see steady demand for specific components subject to everyday wear and tear. We stock multiple drive shaft variants for the Audi 50, accommodating the technical variations across the model's production years, engine choices and revisions. Alongside complete shafts, the inner joint is a common replacement part; we offer 5 different types of inner CV joints to guarantee an exact fit to the gearbox flange, whatever your car's exact build.

Explore the dedicated categories for your model:

  • Drive shafts for Audi 50
  • Inner CV joints for Audi 50
Opting for a complete drive shaft gives you an all-in-one solution with inner and outer CV joints plus boots pre-assembled and ready to install. This saves valuable workshop time and ensures every link in the assembly is brand new and balanced. For more targeted repairs, fitting just the inner constant velocity joint is a sensible, cost-effective option if the outer joint remains sound. We always advise checking both sides of the car or replacing components in pairs to maintain balanced handling.

How to find the right part for your Audi 50

Navigate directly to the right category for your Audi 50:

When diagnosing driveline problems, heading straight to the correct subcategory saves time. Comparing specific assemblies for the Audi 50 makes it easier to tell drive shaft, CV joint and propeller shaft issues apart and proceed to the parts best matched to your symptoms and vehicle fitment.

Identifying the exact replacement part for a classic vehicle like the Audi 50 can sometimes be tricky, as technical specifications evolved over production and components may have been altered by past owners. The most reliable way to begin is by selecting your car's exact make, model and engine variant in our store selector. This narrows our catalogue down to compatible parts. However, on vehicles over 40 years old, we always recommend verifying physical dimensions and counting the spline teeth on your original component, as parts from other model years may have been installed during previous repairs.

At CVJoint24, our catalogue data is structured to make finding the right car parts simple and straightforward. You can browse through our main Audi section to view the entire catalogue, but for the Audi 50, the model-specific category pages provide the clearest route to the correct part. If you have any doubts about compatibility, our driveline specialists are on hand to assist. We want you to order with complete confidence, getting the right component first time to avoid unnecessary downtime and return postage.

Why shop at CVJoint24

As a dedicated Swedish driveline specialist shipping across the European Union from our Helsingborg warehouse, we combine in-depth technical expertise with a comprehensive catalogue tailored to European motoring conditions. When you purchase Audi 50 parts from us, you are protected by our fitment guarantee. This means we take responsibility for ensuring the parts fit your vehicle based on the vehicle details you provide, offering total peace of mind when ordering technical mechanical spares. We know keeping your car on the road is important, so we dispatch quickly to keep workshop delays to a minimum.

Focusing exclusively on driveline systems allows us to maintain a standard of quality and precision that general car parts suppliers rarely match. Because power transmission is our sole focus, our team provides expert advice to help you find the correct component right away. European winters, road salt and seasonal temperature swings demand resilient materials, especially regarding rubber compounds in CV boots and protective coatings on drive shafts. Our products are selected to withstand these tough conditions. Partner with CVJoint24 to give your classic Audi 50 the finest parts for thousands of reliable kilometres ahead, whether for daily driving or vintage rallies.

Frequently asked questions about drivetrain parts for Audi 50

What are the most common signs that a drive shaft on my Audi 50 needs replacing?

The most common symptoms are a clicking sound when making sharp turns (outer joint) or vibrations through the car under acceleration (inner joint). Grease leaking from a damaged boot is also a clear sign that attention is required.

Can I replace just the inner CV joint on my Audi 50?

Yes, we offer separate inner CV joints (5 different variants) for Audi 50. If the shaft itself and the outer joint are in good condition, this is a cost-effective way to cure vibrations.

How do I know that the drive shaft will fit my specific model year?

The most reliable method is to select your car's make, model and engine variant in our store. We also recommend checking the number of splines on your old part to be 100% confident of the fitment.

Why is it important to replace a split CV boot immediately?

A split boot lets lubricating grease escape and allows dirt and water in. This destroys the internal components of the CV joint in very short order, leading to a much more costly replacement of the entire joint or shaft.

Do you offer a fitment guarantee on parts for Audi 50?

Yes, we provide a fitment guarantee across all our drivetrain components. When you select the correct make, model and engine variant when ordering, we guarantee that you will receive a part that is technically correct for your car.

How quickly are parts delivered for my Audi 50?

We always aim for dispatch the next working day for orders placed on weekdays, ensuring you can get your Audi 50 back on the road as quickly as possible.