Audi 80 1.9 TDI

Spare parts and drivetrain components for the Audi 80 1.9 TDI. Check fitment by make, model and engine before ordering.

Products for Audi 80 1.9 TDI

14 products
1 - 14 of 14
Item no.:1192250
  • Position: Front left
  • Splines gearbox side: 130
  • Splines wheel side: 33
  • Total length: 572 mm
  • ABS teeth: 45
Item no.:2156120
  • Position: Front right
  • Splines wheel side: 33
  • Total length: 557 mm
  • Joint diameter: 88 mm
  • ABS teeth: 45
Item no.:0475982
  • Position: Inner
  • Inner splines: 34
  • Seal diameter: 130 mm
  • Total length: 59,5 mm
  • Joint diameter: 90 mm
Item no.:0374730
  • ABS teeth: 45
  • Inner diameter: 64 mm
  • Outer diameter: 74 mm
  • Width: 8,1 mm
Item no.:1199364
  • Position: Front left
  • Splines wheel side: 33
  • Total length: 572 mm
  • Joint diameter: 88 mm
  • Flange diameter: 130 mm
Item no.:2166163
  • Position: Front right
  • Splines wheel side: 33
  • Total length: 557 mm
  • Joint diameter: 88 mm
  • Flange diameter: 130 mm
Item no.:0528397
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 53 mm
  • Outer splines: 33
  • ABS teeth: 45
Item no.:336503
  • ABS teeth: 45
  • Inner diameter: 64 mm
  • Outer diameter: 74 mm
  • Width: 8,1 mm
Item no.:0692623
  • Total length: 89 mm
Item no.:1112379
  • Position: Front left
  • Splines wheel side: 33
  • Total length: 570 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 130 mm
Item no.:2151788
  • Position: Front right
  • Splines wheel side: 33
  • Total length: 556 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 130 mm
Item no.:352987
  • Position: Front, Outer
  • Inner splines: 30
  • Seal diameter: 53 mm
  • Outer splines: 33
  • Thread size: M14X1,5
Item no.:0641152
  • Total length: 88 mm
Item no.:0926057
  • Inner diameter: 24 mm
  • Outer diameter: 40 mm

Drivetrain for Audi 80 1.9 TDI

The Audi 80 1.9 TDI represents a milestone in Audi history, pairing the legendary 1.9-litre turbo diesel engine with the robust B4 chassis. For this powerful setup to run seamlessly, you need a drivetrain capable of handling constant torque without faltering. The drivetrain is the vital link between engine power and the road surface, and on a car like the Audi 80 1.9 TDI, every single component is engineered to withstand extended use under varied driving conditions. As specialists in Audi, we ensure you have access to parts that meet or exceed original equipment standards. Investing in premium components for your power transmission is not merely about performance, but also about maintaining your car's value and keeping it a dependable workhorse for years to come. We understand the critical role precision fit plays, especially for TDI models where unwanted vibrations can easily resonate throughout the entire chassis if components are not accurately balanced.

How the drivetrain is structured on the Audi 80 1.9 TDI

The engineering behind the Audi 80 1.9 TDI drivetrain focuses firmly on durability and efficiency. The system relies on a gearbox that distributes power to two front drive shafts. Each Audi 80 1.9 TDI drive shaft is fitted with two joints: an inner joint mounted towards the gearbox and an outer joint at the wheel hub. The outer joint is a constant velocity joint (CV joint), allowing it to transfer power smoothly regardless of the wheel's steering angle. The inner joint is typically designed to accommodate axial movement, which is essential as the vehicle's suspension travels up and down. For the Audi 80 1.9 TDI, these components feature heavy-duty dimensions to cope with the distinctive torque curve of the turbo diesel engine. Understanding how these parts interact is key to tracking down issues and ensuring you choose the correct replacement part when carrying out repairs.

Common faults and symptoms

Identifying common drivetrain faults and symptoms on an Audi 80 1.9 TDI can save both time and money. One of the classic signs of wear is a rhythmic clicking noise heard when turning sharply at low speeds. This almost always indicates that an Audi 80 1.9 TDI outer CV joint has started to fail, frequently caused by a split CV boot that has let in grit and moisture. If you instead experience vibrations that intensify with vehicle speed or under hard acceleration, the culprit is often an Audi 80 1.9 TDI inner CV joint or an unbalanced driveshaft. Another frequent issue on these models concerns the braking system's interaction with the drivetrain; an illuminated ABS warning light or erratic ABS activation is commonly caused by a cracked or corroded Audi 80 1.9 TDI ABS ring. By paying attention to these early warning signs, you can tackle repairs before they cause secondary damage to your gearbox or suspension.

Common parts to replace on the Audi 80 1.9 TDI

When maintaining your Audi 80 1.9 TDI, certain parts are subjected to higher wear than others. Our range focuses on stocking the most sought-after components for this specific model variant. We currently supply four different complete drive shafts, covering the various technical specifications across the production run. For those who prefer to replace only the worn joint, we carry two variants of outer CV joints and a premium-quality inner CV joint. In addition, we supply durable ABS rings that are crucial for your vehicle's safety systems. Here are the categories available for your vehicle:

  • Audi 80 1.9 TDI drive shaft – Complete solutions for straightforward replacement.
  • Audi 80 1.9 TDI outer CV joint – To eliminate clicking noises while cornering.
  • Audi 80 1.9 TDI inner CV joint – To cure vibrations under acceleration.
  • Audi 80 1.9 TDI ABS ring – To restore proper anti-lock braking function.

By selecting the appropriate category, you can be sure of receiving parts thoroughly tested and rated for the everyday demands placed on an Audi 80 1.9 TDI.

Finding the right part for your Audi 80 1.9 TDI

Navigate directly to the right component section for your Audi 80 1.9 TDI:

When diagnosing drivetrain issues, starting in the right category saves valuable time. By comparing the exact sections for the Audi 80 1.9 TDI, it is straightforward to differentiate between drive shaft, CV joint or propeller shaft issues and proceed to the page that matches your symptoms and fitment criteria.

Navigating spare parts requires precision, particularly on a classic vehicle like the Audi 80 1.9 TDI where subtle model-year updates or chassis splits make a real difference. At CVJoint24, we make the process simple. By choosing your car's make, model and engine, you can instantly filter the eight products relevant to your specific vehicle. This takes out the guesswork and ensures you select components with the correct length, spline count and diameter. We always advise cross-checking the technical specifications on the product page against the components on your car, especially if prior modifications have been made. Our database is tailored for the Audi 80, providing dependable accuracy. Finding the right car parts for your Audi 80 1.9 TDI has never been easier or more reliable.

Why shop at cvjoint24.com

Why choose cvjoint24.com for your Audi 80 1.9 TDI? The answer is simple: we are a dedicated Swedish driveline specialist shipping across Europe from our central warehouse. Unlike generic car part retailers, we focus exclusively on drivetrain components. This deep specialism means we maintain superior product knowledge and an inventory tailored to resolving transmission and driveline problems quickly and efficiently. We provide an exact-fit guarantee to give you full peace of mind with every order. With our emphasis on getting the right part to you straight away, we help reduce the time your car spends in the garage. We understand how important your Audi 80 1.9 TDI is for your daily driving, and we are here to keep it running smoothly with parts you can count on in any weather. Welcome to your driveline specialist.

Frequently Asked Questions about Drivetrain for Audi 80 1.9 TDI

How do I know if the drive shaft on my Audi 80 1.9 TDI needs replacing?

Common signs include vibrations under acceleration or unusual noises while driving. If the CV boot is split and grease has leaked out, there is a high risk that the shaft or joint has been damaged.

Does the same CV joint fit all Audi 80 models?

No, there are differences depending on the engine option and model year. For the 1.9 TDI, components are often more heavily dimensioned. Always select your vehicle make, model and engine to ensure you receive the correct part.

Why does my Audi 80 1.9 TDI vibrate under acceleration?

Vibrations under load are often caused by wear in the inner CV joint. Because the TDI engine delivers high torque, these parts experience more wear than on petrol models.

Is it difficult to replace an ABS ring on an Audi 80?

It requires removing the CV joint, but the ring itself is press-fitted into place. This is a common repair when the ABS warning light illuminates due to corrosion.

What is included when I buy an outer CV joint from you?

Our CV joint kits are supplied complete with the joint, CV boot, grease, clamps and mounting hardware to ensure a professional replacement.

How do I find parts that fit my Audi 80 1.9 TDI?

Yes, our search function is optimised to display the exact parts that fit your Audi 80 1.9 TDI based on official vehicle data when you select your model details.