Audi 90 2.3 E Quattro

Spare parts and drivetrain components for the Audi 90 2.3 E Quattro. Confirm correct fitment by selecting your vehicle model and engine before ordering.

Products for Audi 90 2.3 E Quattro

45 products
1 - 24 of 45
Item no.:1144052
  • Position: Front left
  • Splines wheel side: 33
  • Total length: 586 mm
  • Joint diameter: 90 mm
  • ABS teeth: 45
Item no.:0283789
  • Bearing thickness: 15 mm
  • Hole spacing c/c: 130 mm
  • Height: 41 mm
Item no.:0451383
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 100 mm
  • Total length: 34 mm
  • Joint diameter: 100 mm
Item no.:0373198
  • ABS teeth: 45
  • Inner diameter: 64 mm
  • Outer diameter: 74 mm
  • Width: 8,1 mm
Item no.:0519921
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 53 mm
  • Outer splines: 33
  • ABS teeth: 45
Item no.:0630427
  • Total length: 100 mm
  • Inner diameter: 21 mm
Item no.:7308920
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 94 mm
  • Total length: 32 mm
  • Joint diameter: 94 mm
Item no.:0516247
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 51 mm
  • Outer splines: 22
  • Thread size: M16X1,5
Item no.:0592010
  • Position: Outer
  • Inner splines: 30
  • Splines wheel side: 22
  • Seal diameter: 51 mm
  • ABS teeth: 96
Item no.:0397202
  • ABS teeth: 96
  • Inner diameter: 64 mm
  • Outer diameter: 73 mm
  • Width: 8,1 mm
Item no.:0550064
  • Position: Outer
  • Inner splines: 30
  • Splines wheel side: 33
  • Seal diameter: 53 mm
  • ABS teeth: 96
Item no.:335823
  • ABS teeth: 45
  • Inner diameter: 64 mm
  • Outer diameter: 74 mm
  • Width: 8,1 mm
Item no.:0691842
  • Total length: 89 mm
Item no.:2165754
  • Position: Front right
  • Splines wheel side: 33
  • Total length: 573 mm
  • Joint diameter: 90 mm
  • ABS teeth: 45
Item no.:210124
  • Position: Front right
  • Splines wheel side: 22
  • Total length: 620 mm
Item no.:210895
  • Position: Front right
  • Splines wheel side: 22
  • Total length: 620 mm
  • Joint diameter: 81 mm
  • ABS teeth: 96
Item no.:111781
  • Position: Front left
  • Splines wheel side: 22
  • Total length: 632 mm
  • Joint diameter: 81 mm
  • Joint diameter, gearbox side: 94 mm
Item no.:113307
  • Position: Front left
  • Splines wheel side: 22
  • Total length: 632 mm
  • Joint diameter: 81 mm
  • ABS teeth: 96
Item no.:510008
  • Position: Rear right
  • Splines wheel side: 26
  • Total length: 655 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:511463
  • Position: Rear right
  • Splines wheel side: 26
  • Total length: 655 mm
  • Joint diameter: 90 mm
  • ABS teeth: 96
Item no.:412868
  • Position: Rear left
  • Splines wheel side: 26
  • Total length: 618 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:416448
  • Position: Rear left
  • Splines wheel side: 26
  • Total length: 618 mm
  • Joint diameter: 90 mm
  • ABS teeth: 96
Item no.:3576868
  • Position: Front, Outer
  • Inner splines: 30
  • Seal diameter: 51 mm
  • Outer splines: 22
  • Joint diameter: 82 mm
Showing 1–24 of 45 products

Audi 90 2.3 E Quattro

The Audi 90 2.3 E Quattro is an iconic model that demands precision when it comes to spare parts. The drivetrain in this car is the beating heart of the Quattro system, meaning every component must work in perfect harmony to deliver that legendary four-wheel-drive capability. As drivetrain specialists, we understand the unique demands placed on a vehicle with this setup. We have assembled a range covering everything from drive shafts to specific ABS rings, all to help you maintain your car's original driving dynamics and safety. Owning an Audi 90 with the distinctive five-cylinder 2.3-litre engine brings a responsibility to preserve its engineering, and we are here to support you by providing the right parts with guaranteed fitment. Our focus is on supplying components that do not simply fit physically, but also perform reliably under the heavy loads imposed by a permanent all-wheel-drive system.

How the drivetrain is engineered on the Audi 90 2.3 E Quattro

The layout of the drivetrain on the Audi 90 2.3 E Quattro is a mechanical masterpiece of its era. The engine is longitudinally mounted, ensuring balanced weight distribution and enabling the permanent four-wheel-drive layout. Power is transferred from the gearbox via a centre differential to both the front and rear axles. This requires a robust propeller shaft running down the centre of the car to send torque to the rear differential. At the front, the drive shafts must accommodate both steering angles and power delivery, while the rear drive shafts focus purely on propulsion. Every link in this chain, from the inner CV joints at the gearbox to the outer CV joints at the wheel hubs, plays a crucial role. For a Quattro owner, it is essential to realise that wear is distributed differently than on a front-wheel-drive car, as all four wheels are constantly driven. This puts greater demands on keeping CV boots intact and ensuring every constant velocity joint is thoroughly lubricated to prevent premature failure across this intricate system.

Common faults and symptoms

Diagnosing drivetrain faults on an Audi 90 2.3 E Quattro requires a trained ear and a feel for how the car behaves. One of the classic signs of a worn outer CV joint is a rhythmic clicking noise during tight turns under acceleration. If vibrations arise through the car under load instead, particularly when accelerating in a straight line, it often points to worn inner CV joints or an unbalanced prop shaft. Because the Quattro system features more moving components than a standard two-wheel-drive vehicle, even minor play in a propeller shaft centre bearing or universal joint can produce noticeable resonance through the cabin. Another common issue on this generation of models is cracked ABS rings. If the ABS triggers prematurely at low speeds or the warning light illuminates, a cracked or corroded reluctor ring is frequently to blame. By paying close attention to these symptoms, you can rectify faults before they cause more expensive collateral damage to differentials or the gearbox.

Common parts to replace on the Audi 90 2.3 E Quattro

To keep your Audi 90 2.3 E Quattro in peak condition, certain driveline parts will inevitably require replacement over time. We have structured our range so you can quickly locate what you need for this specific model. Here are the most frequently requested categories:

  • Audi 90 2.3 E Quattro drive shaft - Complete solutions for straightforward replacement.
  • Audi 90 2.3 E Quattro outer CV joint - To eliminate clicking noises when cornering.
  • Audi 90 2.3 E Quattro inner CV joint - For smooth, vibration-free acceleration.
  • Audi 90 2.3 E Quattro propeller shaft - Central torque transfer for the all-wheel-drive system.
  • Audi 90 2.3 E Quattro ABS ring - To restore correct anti-lock braking performance.

By selecting the appropriate category, you can view all available parts. We stock an extensive selection for this model, including various outer CV joints and inner alternatives to suit every technical variation produced.

How to find the right part for your Audi 90 2.3 E Quattro

Navigate to the specific component category for your Audi 90 2.3 E Quattro:

On a vehicle with several potential driveline issues, it pays to start directly in the correct category. By comparing the specific sections for the Audi 90 2.3 E Quattro, you can readily distinguish between a fault in a drive shaft, CV joint or prop shaft and proceed straight to the page that matches your symptoms and fitment requirements.

Finding the correct replacement part for a classic Audi can sometimes feel challenging, but our shop makes it straightforward. Simply select your car's exact make, model and engine variant to filter parts technically verified for your Audi 90 2.3 E Quattro. This is vital for Quattro models, as driveshafts and joints frequently differ from front-wheel-drive variants in both length and spline count. We also advise checking physical dimensions or tooth counts on the ABS ring if multiple versions are listed, as Audi introduced revisions during production years. Our catalogue is set up to point you to the right component immediately, avoiding incorrect orders. If you are ever unsure, our specialist team is on hand to guide you, ensuring that the part you receive fits your car perfectly on installation.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist shipping across the EU from our central warehouse in Helsingborg, Sweden. We combine in-depth technical expertise with an inventory selected to meet strict standards for durability, quality and fitment. When you order from us, you receive high-quality car parts supported by our reliable fitment guarantee. We know your Audi 90 2.3 E Quattro deserves proper care, which is why we partner exclusively with trusted OE-grade manufacturers. With rapid dispatch across Europe, you can complete repairs swiftly and get your vehicle back on the road. Our aim is to make finding the right component simple, whether you are a professional garage technician or a classic Audi enthusiast. By focusing solely on drivetrain components, we offer a level of expertise and depth of stock that general parts retailers rarely match. Reliable spare parts, delivered with knowledge and care.

Frequently asked questions about drivetrain parts for the Audi 90 2.3 E Quattro

How do I know if a CV joint fits my Audi 90 2.3 E Quattro?

The most reliable method is to select your car's make, model and engine variant in our shop. Because Quattro models have specific dimensions for drive shafts and joints, our vehicle selector ensures you receive parts with the correct spline count and length.

Is there a difference between the front and rear drive shafts on this model?

Yes, the front and rear drive shafts on the Audi 90 2.3 E Quattro are not identical. They differ in design and dimensions to match the respective differentials and suspension setups.

Why does my Audi 90 vibrate during acceleration?

Vibrations under load are often caused by worn inner CV joints or issues with the propeller shaft centre bearing and universal joints. Inspect these components if you notice shaking or shuddering throughout the drivetrain.

Can I replace just the ABS ring, or do I need to replace the entire CV joint?

On the Audi 90 2.3 E Quattro, the ABS ring can often be replaced separately if the constant velocity joint itself is otherwise in good working order. This is a cost-effective solution if the reluctor ring has simply cracked due to corrosion.

How often should I inspect the CV boots on my Quattro?

We recommend a visual inspection during every routine service or seasonal wheel change. A split CV boot quickly allows grit and moisture to enter the joint, causing premature wear and eventual failure.

What is included when I purchase an outer CV joint kit from you?

Our CV joint kits are complete and typically include the joint itself, a model-specific CV boot, premium grease, circlips and heavy-duty clamps for a professional installation.