Audi A3 2.0 TDI

Driveline components and spare parts for the Audi A3 2.0 TDI. Select your car's make, model and engine to verify fitment before ordering.

Products for Audi A3 2.0 TDI

56 products
49 - 56 of 56
Item no.:341482
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 46 mm
  • Total length: 136,2 mm
  • Joint diameter: 98 mm
Item no.:690321
  • Position: Rear
Item no.:0618738
  • Position: Front
  • Total length: 107 mm
  • Height: 112 mm
Item no.:0113600
  • Position: Front right
  • Splines gearbox side: 37
  • Total length: 466 mm
Item no.:249164
  • Position: Inner
  • Inner splines: 34
  • Splines wheel side: 23
Item no.:349103
  • Position: Front, Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 107 mm
Item no.:343561
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 108 mm
Showing 49–56 of 56 products

Audi A3 2.0 TDI Drivetrain

The Audi A3 2.0 TDI is a popular model renowned for its balance of fuel efficiency and torque. The substantial torque delivered by the potent diesel engine places high demands on the vehicle's drivetrain. The drivetrain is the system responsible for transmitting power from the engine and gearbox out to the wheels, and for an Audi A3 this often involves a complex configuration of drive shafts and joints. Maintaining these components is vital to preserve your car's driving pleasure and safety. Here at CVJoint24, you will find a carefully selected range tailored specifically to the 2.0 TDI variant. We understand that fitting the correct part is the difference between a successful repair and recurring trouble. Choosing the proper components ensures efficient power delivery without unnecessary friction or premature wear on other components. Our focus is on supplying parts that match original equipment specifications to guarantee an exact fit and a long service life.

How the Audi A3 2.0 TDI drivetrain is configured

The configuration of the drivetrain on an Audi A3 2.0 TDI depends on whether the car is front-wheel drive or fitted with Quattro all-wheel drive. Fundamentally, the system uses a gearbox that transmits power via drive shafts to the front wheels. For models with all-wheel drive, a propeller shaft Audi A3 2.0 TDI runs beneath the vehicle floor to power the rear axle. Each drive shaft is fitted with two joints: an inner joint attached to the gearbox and an outer joint situated at the wheel hub. These joints allow the wheels to move with the suspension and steer while continuously delivering power. It is an impressive mechanical assembly subject to immense loads every time you accelerate. Understanding this layout is the first step in pinpointing which part needs replacing when symptoms arise. We have catalogued the precise parts required for each configuration of the A3 2.0 TDI to simplify your choice and ensure you receive the correct technical specification for your car.

Common faults and symptoms

Several unmistakable warning signs indicate that your Audi A3 drivetrain is beginning to fail. One of the most frequent symptoms is a clicking or knocking sound on full steering lock under acceleration. This typically points to a worn outer CV joint Audi A3 2.0 TDI or dirt ingress caused by a torn CV boot. If you instead experience vibrations through the car body under load, particularly at motorway speeds, it often signals excessive play in an inner CV joint. For Quattro owners, driveline vibrations or imbalance from the centre tunnel may indicate wear in the propeller shaft or its centre bearing. These warning signs should never be overlooked, as a failed drivetrain component can lead to complete breakdown and leave you stranded. Acting promptly often allows you to renew a single constant velocity joint rather than an entire axle, saving both time and money.

Common replacement parts for Audi A3 2.0 TDI

Within our range for the Audi A3 2.0 TDI, we stock the critical components most commonly replaced during the car's service life. We supply multiple driveshaft options covering the majority of engine and gearbox combinations for this model, alongside several propeller shafts for all-wheel-drive versions. By offering both complete shafts and individual joints, we give you the flexibility to choose the most cost-effective repair method. Every component is engineered to meet the demanding standards expected of an Audi, ensuring high precision and long-term durability. Here are the main product categories:

  • Drive shafts: Complete units for quick and straightforward replacement during major overhauls.
  • Outer CV joints: The most frequent wear item when clicking noises occur while cornering.
  • Inner CV joints: The ideal remedy for shudder and vibrations under acceleration.
  • Propeller shafts: Reliable power transmission to the rear axle on Quattro models.

Finding the right part for your Audi A3 2.0 TDI

Navigate to the specific component category for your Audi A3 2.0 TDI:

With multiple drivetrain components that can produce similar symptoms, starting in the correct category saves valuable time. By comparing the dedicated product groups for the Audi A3 2.0 TDI, you can easily distinguish between drive shaft, CV joint or prop shaft issues and select the exact replacement for your vehicle's specification.

Why buy from CVJoint24

CVJoint24 is the international webshop of a Swedish driveline specialist shipping across the EU from its central warehouse in Helsingborg, Sweden. Our strength lies in deep technical expertise and a tightly focused range of premium-quality drivetrain components. When shopping with us, our rigorous compatibility checks help ensure you always receive the right part for your Audi A3 2.0 TDI. We provide a dependable fitment guarantee so you can install every component with complete confidence. Fast dispatch from our warehouse gets your car back on the road without unnecessary delay. We combine genuine specialist knowledge with a smooth online shopping experience. Whether you are a professional workshop technician or a DIY mechanic, we are your trusted partner for vehicle driveline parts.

Frequently Asked Questions about the Drivetrain for Audi A3 2.0 TDI

How do I know if my Audi A3 2.0 TDI needs a new drive shaft?

The most common signs are vibrations under acceleration or clicking noises when cornering. If the vibrations are severe, the complete drive shaft or the inner joint may need replacing.

What is the difference between the inner and outer CV joint on an Audi A3?

The outer CV joint is located by the wheel and typically produces noises when turning. The inner CV joint sits by the gearbox and usually causes vibrations when accelerating in a straight line.

Do all drive shafts fit both manual and automatic Audi A3 2.0 TDI models?

No, there are differences in length and splines depending on the gearbox type. Always select your vehicle's make, model and engine to ensure the correct fitment.

Why does my Audi A3 vibrate under acceleration?

This is often due to wear in the inner CV joint. When play develops inside the joint, it creates an imbalance that transmits as vibrations through the car's chassis under load.

Is the boot included when I buy a new CV joint from you?

Yes, our CV joints are supplied as complete kits with a CV boot, grease, clips and mounting hardware to ensure a straightforward replacement.

How quickly can I receive the parts for my Audi?

We dispatch all in-stock parts promptly from our central warehouse to ensure your Audi A3 2.0 TDI is back on the road as quickly as possible.