Audi A4 Avant 1.8 T Quattro

Car parts and drivetrain components for Audi A4 Avant 1.8 T Quattro. Always check the fit before ordering.

Products for Audi A4 Avant 1.8 T Quattro

59 products
1 - 24 of 59
Item no.:0361113
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:337123
  • Position: Front
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:1140840
  • Position: Front left
  • Flange diameter: 123 mm
  • Total length: 595 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:2185952
  • Position: Front right
  • Flange diameter: 123 mm
  • Total length: 620 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:0484542
  • Position: Inner
  • Seal diameter: 123 mm
  • Inner splines: 34
Item no.:0593740
  • Position: Outer
  • ABS teeth: 45
  • Seal diameter: 59 mm
  • Inner splines: 33
  • Outer splines: 38
Item no.:0280086
  • Diameter: 30 mm
  • Height: 85 mm
  • Hole spacing c/c: 228 mm
  • Bearing thickness: 15 mm
Item no.:0296782
  • Position: Inner
  • Inner splines: 25
  • Joint diameter: 100 mm
Item no.:616032
  • Position: Rear
  • Total length: 612 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:1165922
  • Position: Front left
  • Flange diameter: 130 mm
  • Total length: 596 mm
  • Splines wheel side: 33
  • ABS teeth: 45
Item no.:2102494
  • Position: Front right
  • Flange diameter: 130 mm
  • Total length: 617 mm
  • Splines wheel side: 33
  • ABS teeth: 45
Item no.:2100766
  • Position: Front right
  • Flange diameter: 123 mm
  • Total length: 490 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:0419152
  • Position: Inner
  • Seal diameter: 100 mm
  • Inner splines: 33
  • Joint diameter: 100 mm
Item no.:0561718
  • Position: Outer
  • ABS teeth: 45
  • Seal diameter: 53 mm
  • Inner splines: 30
  • Outer splines: 33
Item no.:627968
  • Position: Rear
  • Total length: 1,149 mm
Item no.:3137588
  • Position: Front left, Front right
  • Flange diameter: 123 mm
  • Joint diameter: 123 mm
  • Total length: 544 mm
  • ABS teeth: 45
Item no.:3176701
  • Position: Front left, Front right
  • Flange diameter: 123 mm
  • Total length: 521 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:0450739
  • Position: Inner
  • Seal diameter: 130 mm
  • Inner splines: 34
Item no.:1174172
  • Position: Front left
  • Flange diameter: 130 mm
  • Total length: 495 mm
  • Splines wheel side: 33
  • ABS teeth: 45
Item no.:1139983
  • Position: Front left
  • Flange diameter: 100 mm
  • Total length: 615 mm
  • Splines wheel side: 33
  • ABS teeth: 45
Item no.:2158073
  • Position: Front right
  • Flange diameter: 130 mm
  • Total length: 585 mm
  • Splines wheel side: 33
  • ABS teeth: 45
Item no.:2107767
  • Position: Front right
  • Flange diameter: 100 mm
  • Total length: 636 mm
  • Splines wheel side: 33
  • ABS teeth: 45
Item no.:0517378
  • Position: Outer
  • ABS teeth: 45
  • Seal diameter: 53 mm
  • Inner splines: 30
  • Outer splines: 33
Showing 1–24 of 59 products

Frequently Asked Questions about Drivetrain for Audi A4 Avant 1.8 T Quattro

How do I know if my Audi A4 Avant 1.8 T Quattro needs a new drive shaft?

Common signs include vibrations under acceleration or unusual noises from underneath the car. If the CV boot is split and grease has leaked out over a prolonged period, there is a strong chance the entire drive shaft will need replacing.

Does the same CV joint fit both the front and rear axles?

No, on the Audi A4 Avant 1.8 T Quattro, the CV joints differ between the front and rear, as well as between the inner and outer positions. Always select your vehicle's make, model and engine to ensure you get the correct part.

Why does my car vibrate even after replacing the CV joints?

On a Quattro model, vibrations can also originate from the propeller shaft or its centre bearing. Check the balance and condition of the prop shaft if the vibrations persist after fitting new constant velocity joints.

What causes the ABS warning light to come on in my Audi A4?

A very common cause is a cracked or heavily corroded ABS ring. This sends incorrect signals to the wheel speed sensor. We stock dedicated ABS rings for the 1.8 T Quattro to resolve this issue.

Is it difficult to replace a drive shaft yourself on a Quattro?

It requires the right tools and a fair amount of mechanical experience, particularly because the Quattro drivetrain layout is more compact underneath. We recommend consulting a workshop manual for your specific model.

How quickly can I get the parts delivered?

We offer fast delivery across the EU from our Swedish central warehouse, helping you get your Audi A4 Avant 1.8 T Quattro back on the road as quickly as possible.