Audi A4 Avant 2.0 Tfsi
Spare parts and drivetrain components for Audi A4 Avant 2.0 Tfsi. Verify fitment by selecting your vehicle model before ordering.
Products for Audi A4 Avant 2.0 Tfsi
- Position: Front, Inner
- Total length: 88 mm
- Splines gearbox side: 34
- ABS teeth: 34
- Position: Front, Outer
- Inner splines: 28
- Outer diameter: 94 mm
- Splines wheel side: 42
- Position: Front left, Front right
- Total length: 465 mm
- Splines wheel side: 42
- Position: Outer
- Seal diameter: 76 mm
- Inner splines: 27
- Outer splines: 42
- Joint diameter: 100 mm
- Position: Front left
- Flange diameter: 123 mm
- Total length: 595 mm
- Splines wheel side: 38
- ABS teeth: 45
- Position: Front right
- Flange diameter: 123 mm
- Total length: 620 mm
- Splines wheel side: 38
- ABS teeth: 45
- Position: Outer
- ABS teeth: 45
- Seal diameter: 59 mm
- Inner splines: 27
- Outer splines: 38
- Position: Front left, Front right
- Flange diameter: 123 mm
- Joint diameter: 123 mm
- Total length: 544 mm
- ABS teeth: 45
- Position: Front left, Front right
- Flange diameter: 123 mm
- Total length: 521 mm
- Splines wheel side: 38
- ABS teeth: 45
- Position: Front
- ABS teeth: 45
- Inner diameter: 77 mm
- Outer diameter: 81 mm
- Width: 11 mm
- Position: Front, Outer
- Inner splines: 25
- Outer diameter: 85 mm
- Splines wheel side: 42
- Position: Outer
- Seal diameter: 76 mm
- Inner splines: 28
- Outer splines: 42
- Position: Front left, Front right
- Flange diameter: 123 mm
- Total length: 466 mm
- Splines wheel side: 42
- Flange diameter: 124 mm
- Total length: 595 mm
- Splines wheel side: 38
- Flange diameter: 124 mm
- Total length: 615 mm
- Splines wheel side: 38
- Position: Front
- ABS teeth: 45
- Inner diameter: 77 mm
- Outer diameter: 81 mm
- Width: 11 mm
- Position: Front, Inner
- Total length: 84 mm
- Splines wheel side: 24
- Position: Front left, Front right
- Flange diameter: 123 mm
- Total length: 458 mm
- Splines wheel side: 42
Drivetrain for Audi A4 Avant 2.0 Tfsi
The Audi A4 Avant 2.0 Tfsi is renowned for its blend of performance and refined comfort. However, the engine's torque places significant demands on the car's drivetrain, particularly under hard acceleration and during cornering. Maintaining the drivetrain is vital to preserve the distinctive driving dynamics that Audi provides. With us, you will find a carefully selected range of components engineered specifically to match the technical specifications of the 2.0 Tfsi engine. We focus on supplying parts that meet or exceed original equipment standards, giving you complete peace of mind across every kilometre you drive.
Our range includes a total of 15 high-quality products for this specific model variant. By concentrating our expertise entirely on driveline systems, we offer far deeper technical knowledge than general car parts retailers. Whether you need to resolve an irritating noise or carry out preventative maintenance, we have the components required to ensure your Audi continues to transfer power to the road smoothly and without vibration.
How the drivetrain is configured on the Audi A4 Avant 2.0 Tfsi
The drivetrain on an Audi A4 Avant 2.0 Tfsi is a sophisticated assembly responsible for transferring engine torque to the road surface. The system consists of several interacting components, with the drive shafts playing a central role. These shafts are fitted with both inner and outer CV joints, allowing the road wheels to steer and move vertically with the suspension while power is transmitted uninterrupted. Front-wheel-drive models focus on the front axles, whilst Quattro variants feature a more complex layout distributing torque across all four wheels.
Every component is precision-engineered to withstand the specific torque loads generated by the 2.0 Tfsi engine. The CV joints are packed with specialised grease and sealed with durable CV boots to minimise friction and keep out dirt and water. Furthermore, the ABS ring forms an integral part of the assembly, supporting both the braking system and the electronic stability programme. Understanding this construction is essential when determining why specific parts wear faster under certain driving conditions.
Common faults and symptoms
Several clear symptoms indicate that a drivetrain component on your Audi A4 Avant 2.0 Tfsi is beginning to fail. One of the most frequent signs is a clicking or knocking sound on full steering lock while moving. This typically points to a worn outer CV joint or a split boot that has allowed road grit to contaminate the bearings. If you notice vibrations through the steering wheel or chassis under acceleration, this often indicates wear in an inner constant velocity joint or an unbalanced, damaged drive shaft.
Another common issue involves the anti-lock braking system. If the ABS warning light illuminates or the ABS pulses unnecessarily during light braking, a cracked or heavily corroded ABS ring is usually responsible. Because these components are constantly exposed to water, road grime and winter salt, deterioration over time is common. Ignoring these symptoms can result in costly consequential damage; in severe cases, a failed constant velocity joint can break completely, leaving the vehicle stranded.
Frequently replaced parts for Audi A4 Avant 2.0 Tfsi
For the Audi A4 Avant 2.0 Tfsi, wear patterns show clear demand for specific driveline components. Our inventory is tailored around these needs to ensure excellent availability. The most common replacement parts include:
- Drive shafts: We stock 8 different complete drive shaft assemblies, simplifying replacement and ensuring perfect factory balance.
- Outer CV joints: With 3 specific options, we cover the most frequent requirements to rectify clicking noises during cornering.
- Inner CV joints: We offer 3 variants designed to eliminate shudder and vibration under heavy acceleration.
- ABS rings: A crucial safety part, supplied to exact original specifications to ensure accurate wheel-speed sensor signals.
Selecting the correct category allows you to restore your vehicle's performance quickly and effectively. We always recommend inspecting the condition of the drive shaft boot during regular servicing, as replacing a worn boot early can protect the joint assembly from premature failure.
How to find the correct part for Audi A4 Avant 2.0 Tfsi
Navigate directly to the appropriate section for your Audi A4 Avant 2.0 Tfsi:
On a vehicle with several possible driveline issues, selecting the right category straight away saves time. By comparing the exact component sections for your Audi A4 Avant 2.0 Tfsi, it is easier to isolate issues between a driveshaft, CV joint or propeller shaft, taking you straight to the products that match your symptoms and specifications.
- Drive shafts for Audi A4 Avant 2.0 Tfsi
- Outer CV joints for Audi A4 Avant 2.0 Tfsi
- Inner CV joints for Audi A4 Avant 2.0 Tfsi
- ABS rings for Audi A4 Avant 2.0 Tfsi
Our fitment guarantee ensures that the spare parts you order will fit your car variant accurately, making us the trusted choice for your repair.
Why shop with CVJoint24
As an international shop backed by a Swedish driveline specialist, we combine technical expertise with dependable service. We know that when a driveline part fails, you need a replacement without delay. Our exclusive focus on drivetrain components enables us to maintain higher quality standards and superior stock availability compared to general retailers. We do not just supply parts; we provide confidence through accurate fitment and detailed product knowledge.
When you choose CVJoint24, you receive components engineered to withstand harsh European road and weather conditions. We make identifying the right part straightforward from the moment you select your make, model and engine variant until your replacement is installed on your Audi A4 Avant 2.0 Tfsi. Guided by our commitment to delivering the right part first time, we have earned the trust of drivers and workshops who value quality and specialist capability.
Frequently asked questions about Drivetrain for Audi A4 Avant 2.0 Tfsi
How do I know whether the inner or outer CV joint is failing on my Audi A4?
A worn outer CV joint typically produces a clicking or snapping noise on full steering lock while driving. A faulty inner CV joint usually causes vibrations through the car's chassis or steering wheel, particularly under acceleration, but rarely makes a noise when cornering.
Do all drive shafts fit the Audi A4 Avant 2.0 Tfsi regardless of model year?
No, specifications can vary depending on the gearbox type and year of manufacture. Always select your car's make, model and engine variant in our vehicle selector to ensure you get a part guaranteed to fit your specific car.
Why has the ABS warning light come on after driving through a deep pothole?
It is common for the ABS ring on an Audi A4 Avant to crack or become damaged following severe impacts or due to corrosion. A cracked or displaced ring sends faulty signals to the wheel speed sensor, triggering the warning light.
Is it better to replace the entire drive shaft rather than just the CV joint?
It depends on the extent of the wear. Replacing the complete drive shaft is often far more time-efficient and guarantees that both inner and outer joints are brand new, providing longer service life and optimal balance in the drivetrain.
What is included when I buy an outer CV joint from you?
Our CV joint kits are supplied complete with the joint itself, CV boot, specialist grease, retaining clips and fitting hardware such as a centre bolt or nut, providing everything required for the replacement.
How quickly can my spare parts be delivered?
We dispatch quickly across Europe from our Swedish central warehouse, ensuring you can get your Audi A4 Avant 2.0 Tfsi back on the road without delay.