Audi A4 Avant 2.5 TDI Quattro

Spare parts and drivetrain components for Audi A4 Avant 2.5 TDI Quattro. Select your make, model and engine to ensure correct fitment before ordering.

Products for Audi A4 Avant 2.5 TDI Quattro

45 products
1 - 24 of 45
Item no.:0566169
  • Position: Outer
  • ABS teeth: 45
  • Seal diameter: 59 mm
  • Inner splines: 27
  • Outer splines: 38
Item no.:0346914
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:336536
  • Position: Front
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:1190980
  • Position: Front left
  • Flange diameter: 123 mm
  • Total length: 595 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:2103449
  • Position: Front right
  • Flange diameter: 123 mm
  • Total length: 620 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:2193528
  • Position: Front right
  • Flange diameter: 123 mm
  • Total length: 490 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:3191918
  • Position: Front left, Front right
  • Flange diameter: 123 mm
  • Joint diameter: 123 mm
  • Total length: 544 mm
  • ABS teeth: 45
Item no.:0201832
  • Diameter: 30 mm
  • Height: 85 mm
  • Hole spacing c/c: 228 mm
  • Bearing thickness: 15 mm
Item no.:0429664
  • Position: Inner
  • Seal diameter: 123 mm
  • Inner splines: 34
Item no.:0233582
  • Number of centre bearings: 1
  • Number of joints: 3
  • Total length: 1,565 mm
Item no.:0238954
  • Position: Inner
  • Inner splines: 25
  • Joint diameter: 100 mm
Item no.:3172394
  • Position: Front left, Front right
  • Flange diameter: 123 mm
  • Total length: 521 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:1174197
  • Position: Front left
  • Flange diameter: 130 mm
  • Total length: 625 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:4159903
  • Position: Rear left
  • Flange diameter: 130 mm
  • Total length: 526 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:2180384
  • Position: Front right
  • Flange diameter: 130 mm
  • Total length: 500 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:0421166
  • Position: Inner
  • Seal diameter: 130 mm
  • Inner splines: 34
Item no.:0409226
  • Position: Inner
  • Seal diameter: 100 mm
  • Inner splines: 33
  • Joint diameter: 100 mm
Item no.:0593038
  • Position: Outer
  • ABS teeth: 45
  • Seal diameter: 53 mm
  • Inner splines: 30
  • Outer splines: 33
Item no.:1142433
  • Position: Front left
  • Flange diameter: 130 mm
  • Total length: 602 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:0694371
  • Position: Front
  • Diameter: 91 mm
  • Outer diameter: 24 mm
Item no.:627200
  • Position: Rear
  • Total length: 1,149 mm
Item no.:111812
  • Total length: 600 mm
  • Splines wheel side: 38
Item no.:214805
  • Position: Front right
  • Diameter: 86 mm
  • Flange diameter: 100 mm
  • Total length: 640 mm
  • ABS teeth: 45
Showing 1–24 of 45 products

Drivetrain for Audi A4 Avant 2.5 TDI Quattro

The Audi A4 Avant 2.5 TDI Quattro represents a unique balance between German engineering and practical versatility. With its muscular V6 diesel engine delivering impressive torque, the drivetrain faces demanding forces every time you step on the accelerator. The Quattro system is central to the car's superb all-weather traction, yet it also means there are more moving parts requiring maintenance compared to a front-wheel-drive model. At CVJoint24, we understand precisely what it takes to keep an Audi A4 Avant 2.5 TDI Quattro in peak condition. As driveline specialists, we supply a range carefully curated to handle the heavy stresses imposed by permanent four-wheel drive and a robust turbo-diesel engine.

Whether cruising on the motorway or tackling winding country lanes, properly functioning driveline components are vital for both safety and the refined driving experience that Audi is famous for. By investing in quality parts from a specialist, you ensure that your vehicle retains its value and reliability for years to come. We focus on supplying parts that match or exceed original equipment specifications, ensuring your Quattro continues to deliver maximum grip in all driving conditions.

How the drivetrain works on the Audi A4 Avant 2.5 TDI Quattro

The drivetrain on an Audi A4 Avant 2.5 TDI Quattro centres around a permanent four-wheel-drive system utilising a mechanical Torsen centre differential. This setup continuously distributes torque between the front and rear axles according to available traction. The engine is mounted longitudinally, creating a symmetrical layout with the gearbox situated immediately behind it. From the gearbox, the front drive shafts extend outwards to the front wheels, while a long propeller shaft runs down the centre of the car to the rear differential, which powers the rear wheels via two further driveshafts. Each drive shaft features two joints: an inner CV joint allowing axial plunge as the suspension moves up and down, and an outer CV joint enabling steering articulation at the front axle.

These joints are protected by rubber CV boots packed with specialised high-pressure grease. On the 2.5 TDI model, these components are robustly dimensioned to withstand the engine's high torque output. Keeping them properly lubricated and shielded from road grime is critical; even the smallest tear in a CV boot allows grit to enter and rapidly destroy the precision-ground bearing surfaces inside the constant velocity joint. A healthy Quattro system requires all these driveline parts to operate without play or imbalance, preventing unnecessary wear on the differentials.

Common faults and symptoms

Identifying drivetrain issues on an Audi A4 Avant 2.5 TDI Quattro requires paying close attention to unusual sounds and vibrations. A classic symptom is a rhythmic clicking or knocking sound on full steering lock, which almost invariably points to a worn outer CV joint. If vibrations occur predominantly under acceleration and disappear as soon as you lift off the throttle, this typically indicates worn inner CV joints, where the bearings have pitted the internal housing. On Quattro models, the prop shaft is another frequent source of vibration; an unsettled judder through the floorpan or centre console usually stems from a failing centre bearing or worn universal joints.

Another common fault on Audis of this vintage involves the ABS rings. Mounted directly onto the outer CV joints, these reluctor rings can crack over time due to corrosion expanding beneath the metal. A fractured ring often causes inappropriate ABS pulsation when braking gently at low speeds, or triggers an unexpected ABS/ESP warning light on the dashboard. Addressing these symptoms early prevents secondary damage to far more costly transmission components, such as the gearbox or differentials, which can suffer from prolonged driveline vibration.

Common replacement parts for Audi A4 Avant 2.5 TDI Quattro

When repairing your Audi A4 Avant 2.5 TDI Quattro, certain replacement parts are frequently requested from our warehouse. We currently stock 23 unique products tailored specifically for this model. Among these, the Drive shafts for Audi A4 Avant 2.5 TDI Quattro are among the most popular choices, as fitting a complete replacement shaft is often far more time-efficient than rebuilding individual joints. We keep 10 different drive shaft variants in stock to cover every axle position on the car.

For those who prefer to renew only the damaged component, we offer 5 types of Outer CV joints for Audi A4 Avant 2.5 TDI Quattro and 4 variants of Inner CV joints for Audi A4 Avant 2.5 TDI Quattro. In addition, the Propeller shafts for Audi A4 Avant 2.5 TDI Quattro are key items in our catalogue for resolving driveline vibrations in the all-wheel-drive system. Finally, we supply 2 types of ABS rings for Audi A4 Avant 2.5 TDI Quattro, offering an economical fix when the joint itself remains serviceable but the sensor ring has failed.

Find the right part for your Audi A4 Avant 2.5 TDI Quattro

Navigate directly to the relevant product section for your Audi A4 Avant 2.5 TDI Quattro:

On a vehicle with multiple potential driveline issues, selecting the correct category from the start saves time. By exploring the dedicated sections for the Audi A4 Avant 2.5 TDI Quattro, it is straightforward to differentiate between drive shaft, CV joint, or prop shaft issues and proceed to the parts matching your symptoms and specifications.

Using these direct links guides you straight to the correct range, allowing you to compare technical specifications easily. We also recommend cross-referencing your original equipment (OEM) part numbers, if available, to guarantee exact fitment before ordering.

Why shop with CVJoint24

Choosing CVJoint24 means partnering with a Swedish driveline specialist dedicated to high-quality vehicle components. We focus exclusively on power transmission, giving us in-depth technical expertise and a targeted inventory that general motor factors rarely match. For your Audi A4 Avant 2.5 TDI Quattro, this means we understand the exact requirements of the Quattro drivetrain and supply parts with guaranteed fitment. We recognise how crucial it is to get your car back on the road promptly, dispatching efficiently from our central Swedish warehouse to customers across Europe.

Our business is built on helping you select the right part the first time, backed by our comprehensive fitment guarantee. We combine premium manufacturing standards with competitive pricing, so you can undertake repairs with complete peace of mind. Buying from a dedicated specialist also gives you access to knowledgeable technical support—an invaluable advantage when dealing with complex driveline repairs. We are your dependable partner for Audi transmission and driveline parts.

Frequently Asked Questions about Drivetrain parts for Audi A4 Avant 2.5 TDI Quattro

How do I know if my Audi A4 Avant 2.5 TDI Quattro needs a new drive shaft?

The most common signs are clicking noises when cornering (outer joint) or vibrations under acceleration (inner joint). If the CV boot is torn and grease has leaked out, there is a high risk that the shaft needs replacing.

Does the same CV joint fit both the front and rear axles on a Quattro?

No, the CV joints usually differ between the front and rear axles on the Audi A4 Avant 2.5 TDI Quattro. It is important to verify the exact fitting position carefully by selecting your vehicle's make, model, and engine variant.

Why does my Audi vibrate under acceleration but not at a constant speed?

This is a classic symptom of worn inner CV joints. When engine torque loads the joint, vibrations are created across the worn bearing surfaces, which are felt most noticeably through the car's chassis.

Can I replace just the ABS ring, or do I have to replace the entire CV joint?

On the Audi A4 Avant 2.5 TDI Quattro, you can often replace just the ABS ring if the CV joint itself is otherwise in good working order. This is a very cost-effective solution for ABS-related fault codes.

What is the advantage of buying a complete drive shaft instead of just a joint?

A complete drive shaft saves considerable installation time, and you get both inner and outer joints as well as new CV boots in one package. It eliminates the risk of future failures on the remaining components of the old shaft.

How does the fitment guarantee work at CVJoint24?

When you select your exact make, model, and engine specification and choose a part we have verified for your car, we guarantee it will fit. In the unlikely event that it does not fit, we will help you find the correct part right away.