Audi A4 Avant 3.0

Car parts and drivetrain components for Audi A4 Avant 3.0. Always check the fit before ordering.

Products for Audi A4 Avant 3.0

17 products
1 - 17 of 17
Item no.:1142908
  • Position: Front left
  • Flange diameter: 123 mm
  • Total length: 595 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:2195335
  • Position: Front right
  • Flange diameter: 123 mm
  • Total length: 620 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:2131294
  • Position: Front right
  • Flange diameter: 123 mm
  • Total length: 490 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:3136226
  • Position: Front left, Front right
  • Flange diameter: 123 mm
  • Joint diameter: 123 mm
  • Total length: 544 mm
  • ABS teeth: 45
Item no.:3138233
  • Position: Front left, Front right
  • Flange diameter: 123 mm
  • Total length: 521 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:0466522
  • Position: Inner
  • Seal diameter: 123 mm
  • Inner splines: 34
Item no.:0581709
  • Position: Outer
  • ABS teeth: 45
  • Seal diameter: 59 mm
  • Inner splines: 27
  • Outer splines: 38
Item no.:0356118
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:330871
  • Position: Front
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:0628179
  • Height: 85 mm
  • Inner diameter: 22 mm
  • Outer diameter: 80 mm
Item no.:113829
  • Total length: 600 mm
  • Splines wheel side: 38
Item no.:217576
  • Flange diameter: 124 mm
  • Total length: 490 mm
  • Splines wheel side: 38
Item no.:110875
  • Flange diameter: 124 mm
  • Total length: 595 mm
  • Splines wheel side: 38
Item no.:218113
  • Flange diameter: 124 mm
  • Total length: 615 mm
  • Splines wheel side: 38
Item no.:319673
  • Total length: 525 mm
  • Splines wheel side: 38
Item no.:0587958
  • Position: Outer
  • ABS teeth: 45
  • Seal diameter: 59 mm
  • Inner splines: 27
  • Outer splines: 38
Item no.:331054
  • Position: Front
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm

Frequently asked questions about Audi A4 Avant 3.0 drivetrain

How do I know if the inner or outer CV joint is failing on my Audi A4 Avant 3.0?

A worn outer CV joint typically makes a clicking or knocking sound on full steering lock while driving. A faulty inner CV joint tends to cause noticeable vibrations through the car under acceleration, whether driving in a straight line or cornering.

Do all Audi A4 drive shafts fit my 3.0 model?

No, drive shafts for the 3.0 engine are often more heavily dimensioned to cope with the higher torque output. It is therefore essential to select your car's exact make, model and engine variant to ensure the correct specification.

Why has the ABS warning light come on in my Audi A4 Avant 3.0?

A common cause is a cracked, corroded or contaminated ABS ring mounted on the CV joint. If the ring is damaged, the wheel speed sensor cannot read the rotation accurately, triggering a fault code and illuminating the warning light.

Can I replace just the CV boot if the CV joint is still in good condition?

Yes, if you catch a split or torn CV boot early before road grit and moisture enter the joint, it is usually sufficient to clean it thoroughly, repack it with fresh grease and fit a new boot to prolong the joint's service life.

What is included when I buy a CV joint from you?

Our CV joint kits are normally supplied complete with the joint itself, a CV boot, grease, clamps and all necessary mounting hardware such as the bolt or nut, giving you everything needed for a professional replacement.

How quickly can I receive spare parts for my Audi?

We aim for prompt dispatch on all stocked items. If you place your order early on a working day, your parts are normally dispatched the same day from our central warehouse to reach you as quickly as possible across Europe.