Audi A4 B9 Avant 35 Tfsi Mild Hybrid

Spare parts and drivetrain components for Audi A4 B9 Avant 35 Tfsi Mild Hybrid. Select your make, model and engine to verify fitment before ordering.

Products for Audi A4 B9 Avant 35 Tfsi Mild Hybrid

6 products
1 - 6 of 6
Item no.:3102333
  • Position: Front left, Front right
  • Flange diameter: 123 mm
  • Total length: 458 mm
  • Splines wheel side: 42
Item no.:0431549
  • Position: Inner
  • Inner splines: 34
  • Outer splines: 123
Item no.:359224
  • Position: Outer
  • Seal diameter: 76,5 mm
  • Inner splines: 25
  • Outer splines: 42
  • ABS teeth: 30
Item no.:356138
  • Position: Front, Outer
  • Inner splines: 28
  • Outer diameter: 94 mm
  • Splines wheel side: 42
Item no.:0697631
  • Height: 85 mm
  • Inner diameter: 22 mm
  • Outer diameter: 80 mm
Item no.:144790
  • Position: Front, Inner
  • Total length: 88 mm
  • Splines gearbox side: 34
  • ABS teeth: 34

Drivetrain for Audi A4 B9 Avant 35 Tfsi Mild Hybrid

The drivetrain in an Audi A4 B9 Avant 35 Tfsi Mild Hybrid represents a modern balance between performance and environmental awareness. As one of the most popular models in Audi's executive compact segment, this specific variant, equipped with mild hybrid technology, requires components that are precisely calibrated to handle both traditional combustion power and electrical assistance. At CVJoint24, we have established ourselves as a Swedish driveline specialist by offering a range tailored specifically to these technical demands. Maintaining the drivetrain on an Audi A4 B9 is not just about replacing parts when they fail; it is about proactively ensuring that power transfer takes place with minimal friction and maximum efficiency. By choosing us, you gain access to expertise that extends deep into Audi's technical specifications, ensuring that every spare part you purchase helps maintain the vehicle's original driving characteristics and safety profile.

How the drivetrain is engineered on Audi A4 B9 Avant 35 Tfsi Mild Hybrid

How the drivetrain is engineered on Audi A4 B9 Avant 35 Tfsi Mild Hybrid is a testament to advanced German engineering. The heart of the system is the 35 TFSI engine working in conjunction with a 12-volt mild hybrid system (MHEV). This energy is stored in a separate lithium-ion battery and used to assist the engine and run electrical systems, but it also influences how torque is delivered to the drive shafts. Power is routed through a seven-speed S-tronic dual-clutch gearbox, which requires drive shafts and joints capable of handling rapid gear shifts and instantaneous torque response. An inner CV joint for the Audi A4 B9 Avant 35 Tfsi Mild Hybrid plays a vital role here by permitting axial movement and dampening the vibrations that arise when the engine shuts down and restarts on the move. This complexity makes the choice of replacement parts critical; the slightest deviation in tolerance can cause imbalance across the entire system, negatively impacting both ride comfort and fuel economy.

Common faults and symptoms

Common faults and symptoms in the drivetrain of this model often develop gradually. One of the most distinctive signs of wear is a rhythmic clicking noise heard when turning sharply at low speeds, which almost invariably points to a worn outer CV joint. For the inner joint, the symptoms are different; here the driver often feels a shudder or vibration through the floorpan or seat, particularly under heavy acceleration between 50 and 80 km/h. Because the Audi A4 B9 Avant 35 Tfsi Mild Hybrid is an exceptionally well-insulated car, these noises and vibrations may initially be subtle, but they should never be ignored. Another critical symptom is oily deposits on the inside of the wheel rim or the garage floor, which indicates a split CV boot. If the grease leaks out, lubrication is lost, and metal-to-metal contact will quickly destroy the joint. Catching these faults early not only saves money, but also prevents you from being stranded at the roadside with a broken drive shaft.

Common parts to replace on Audi A4 B9 Avant 35 Tfsi Mild Hybrid

When it comes to maintaining your Audi A4 B9 Avant 35 Tfsi Mild Hybrid, specific components are more frequently due for replacement. We have structured our range to meet these requirements with the highest precision. Here are the key categories for your vehicle:

  • Drive shafts for Audi A4 B9 Avant 35 Tfsi Mild Hybrid: A complete solution including both inner and outer joints as well as boots, making it the safest choice in cases of extensive wear.
  • Inner CV joints for Audi A4 B9 Avant 35 Tfsi Mild Hybrid: This part is crucial for eliminating drivetrain vibrations and ensuring smooth power delivery from the gearbox.
  • CV boots: Inexpensive insurance protecting higher-value mechanical parts from dirt and moisture.
  • ABS rings and sensors: Vital for ensuring the car's active safety systems operate in proper harmony with the drivetrain.

By focusing on these components, you can ensure your Audi maintains its high technical standards. Our range is carefully selected to meet the demands of a modern mild hybrid, where every part must interact seamlessly to optimise overall system efficiency.

How to find the right part for Audi A4 B9 Avant 35 Tfsi Mild Hybrid

Proceed to the relevant parts section for your Audi A4 B9 Avant 35 Tfsi Mild Hybrid:

On a vehicle with several possible drivetrain issues, it makes sense to start in the correct category straight away. By comparing the exact component sections for the Audi A4 B9 Avant 35 Tfsi Mild Hybrid, it becomes easier to differentiate between faults in the drive shaft, CV joint or propeller shaft, and to navigate to the page that best matches your symptoms and fitment.

Finding the right part for an Audi A4 B9 Avant 35 Tfsi Mild Hybrid requires precision because several technical variations exist across the B9 platform. The most reliable way to ensure compatibility is to select your car's exact make, model and engine variant in our store. Choosing the correct vehicle details matches your search to components verified for your car's specific configuration, including engine code and gearbox type. This is particularly important for the 35 TFSI model, as drivetrain specifications can vary depending on production month and trim level. Alongside selecting your vehicle, it can be useful to verify physical dimensions or original equipment (OEM) part numbers if you have access to them. We offer a straightforward shopping experience designed to minimise the risk of incorrect orders. If you are ever unsure, our customer support team possesses dedicated expertise in the Audi A4 B9 Avant to guide you to the right component, whether you need a complete driveshaft or a small fitting accessory.

Why shop at CVJoint24

Why choose CVJoint24 when your Audi needs replacement parts? We are not just another general car parts retailer; we are dedicated specialists with a singular focus on the drivetrain. This means we have an in-depth understanding of the products we supply and can provide a level of technical support few competitors can match. With our fitment guarantee, you can order with absolute confidence that the parts will fit your Audi A4 B9 Avant 35 Tfsi Mild Hybrid perfectly. We understand that your time is valuable, which is why we operate fast order processing with dispatch across the EU from our Swedish central warehouse. Buying spare parts should be straightforward, dependable and efficient. By combining competitive pricing with OE-quality components, we ensure your vehicle receives the care it deserves. Welcome to genuine driveline expertise—we deliver the right part for your drivetrain every time.

Frequently Asked Questions about Drivetrain Parts for Audi A4 B9 Avant 35 Tfsi Mild Hybrid

How do I know if my Audi A4 B9 needs a new drive shaft?

The most common signs are vibrations under acceleration or clicking noises when cornering. If you spot grease leaking from a CV boot, this is also a clear indication that the drive shaft requires inspection.

Do these parts fit both front-wheel drive and Quattro models?

Drivetrain components can differ between front-wheel drive and all-wheel-drive Quattro models. Always select your vehicle's exact make, model and engine to find the correct parts for your specific setup.

What is the benefit of replacing the complete drive shaft instead of just the CV joint?

Replacing the complete drive shaft is often more time-effective and ensures that all components, including both the inner and outer CV joints as well as the CV boots, are brand new, reducing the risk of future issues.

How does the mild hybrid system affect drivetrain wear?

The mild hybrid system in the 35 TFSI can deliver faster torque response and regenerative braking, placing higher demands on the CV joints to handle fluctuating loads without developing play.

Can I replace the inner CV joint on an Audi A4 B9 myself?

It is possible for an experienced DIY mechanic, but it requires specialist tools and careful assembly. We recommend following the manufacturer's workshop guidelines closely to ensure correct operation.

What does the fitment guarantee at CVJoint24 mean?

Our fitment guarantee means that if you select your vehicle's make, model and engine and the part unexpectedly fails to fit, we will help you exchange it for the correct part or issue a full refund.