Audi A4 2.6 Quattro
Spare parts and drivetrain components for the Audi A4 2.6 Quattro. Verify compatibility using your make, model and engine before ordering.
Products for Audi A4 2.6 Quattro
- Position: Front right
- Splines wheel side: 38
- Total length: 621 mm
- Joint diameter: 98 mm
- ABS teeth: 45
- Position: Front, Outer
- Inner splines: 30
- Seal diameter: 53 mm
- Outer splines: 33
- ABS teeth: 45
Audi A4 2.6 Quattro drivetrain
The Audi A4 2.6 Quattro brings together Audi's classic 2.6-litre V6 engine and the legendary Quattro permanent four-wheel drive system. To keep this sophisticated drivetrain delivering power as it should, you need components engineered to withstand the loads created when torque is split across all four wheels. At CVJoint24, you will find a dedicated range of parts tailored specifically to this engine and drivetrain setup. We appreciate the importance of precision engineering in every component, from the splines on a drive shaft to the fine tolerances within a CV joint. Choosing the right spare parts ensures your car retains its performance and road safety while protecting you against expensive driveline breakdowns down the road. Our range is carefully selected to satisfy the demands of both car enthusiasts and everyday motorists who expect genuine durability.
How the drivetrain works on the Audi A4 2.6 Quattro
The drivetrain on an Audi A4 2.6 Quattro is an intricate mechanical assembly featuring a longitudinally mounted engine paired with a gearbox housing a central Torsen differential. Acting as the heart of the Quattro system, this centre differential mechanically distributes torque between the front and rear axles. From the transmission, drive is delivered forward to the front wheels via front drive shafts, and rearward via a sturdy propeller shaft directly into the rear differential. Every wheel position relies on inner and outer CV joints to accommodate suspension travel and, at the front axle, steering angles. The driveline is also closely integrated with the vehicle's electronic safety systems via ABS rings at each wheel hub. Because of this complex setup, every single component must remain in peak condition to prevent vibration or loss of traction. Any unbalance in the prop shaft or play within a constant velocity joint will quickly resonate throughout the vehicle, spoiling the drive.
Common faults and symptoms
Several unmistakable warning signs reveal when drivetrain components on your Audi A4 2.6 Quattro are beginning to fail. A classic symptom is a rhythmic clicking or knocking noise from the front suspension when cornering on full lock, which almost invariably points to a worn outer CV joint. If you notice shuddering or vibrations throughout the car under hard acceleration, the culprit is often worn inner CV joints or an unbalanced propeller shaft. Quattro drivers should also stay alert to droning or whining sounds from under the cabin, which frequently point towards a worn prop shaft centre bearing or failing universal joints. Another frequent issue is an unexpected ABS warning light or inappropriate intervention under gentle braking, typically caused by a cracked or heavily corroded ABS reluctor ring. Ignoring these symptoms can lead to severe consequential damage to differentials or your gearbox, making prompt diagnosis and repair essential.
Common replacement parts for the Audi A4 2.6 Quattro
To help you maintain your car without hassle, we have grouped the most vital components for your Audi A4 2.6 Quattro. Our inventory features several dedicated items for this specific model variant. Here are the key categories available:
- Drive shafts for Audi A4 2.6 Quattro (3 available) – Complete shaft assemblies for both front and rear axles.
- Outer CV joints for Audi A4 2.6 Quattro (2 available) – For installation at the front wheel hubs.
- Inner CV joints for Audi A4 2.6 Quattro (2 available) – For coupling directly to the gearbox or rear final drive.
- Propeller shafts for Audi A4 2.6 Quattro (1 available) – The central shaft delivering drive to the rear axle.
- ABS rings for Audi A4 2.6 Quattro (3 available) – Essential for reliable operation of the braking system.
Each of these parts is selected for precise fitment and lasting resilience, which is especially critical on a four-wheel-drive car where torque is distributed across all driven corners.
Finding the right part for your Audi A4 2.6 Quattro
Navigate straight to the relevant component section for your Audi A4 2.6 Quattro:
When troubleshooting driveline issues on an all-wheel-drive vehicle, starting in the correct category saves considerable time. Comparing the specific component groups for the Audi A4 2.6 Quattro makes it straightforward to distinguish between faults in a drive shaft, CV joint or propeller shaft, taking you directly to the parts that match your symptoms and technical specifications.
- Drive shafts for Audi A4 2.6 Quattro
- Outer CV joints for Audi A4 2.6 Quattro
- Inner CV joints for Audi A4 2.6 Quattro
- Propeller shafts for Audi A4 2.6 Quattro
- ABS rings for Audi A4 2.6 Quattro
Selecting the correct spare part for an Audi A4 2.6 Quattro demands care, as factory specifications can vary by chassis code and model year. The most reliable approach is to filter by your car's exact make, model and engine variant in our vehicle selector. This automatically presents the parts verified to fit your car. If you are ever unsure whether a replacement driveshaft or an ABS ring matches your setup, we advise counting the external and internal splines (teeth) on your original component and cross-referencing them with our technical drawings. At CVJoint24, we offer an accurate fitment guarantee when parts are selected according to your model details, ensuring you receive the correct part the first time and preventing frustrating delays in the workshop.
Why buy from CVJoint24?
CVJoint24 is the international shop of a Swedish driveline specialist, supplying quality components from our central warehouse in Helsingborg, Sweden across the entire EU. We possess in-depth technical expertise and stock a significantly broader driveline range than general motor factors. When you order a propeller shaft, outer constant velocity joint or inner CV joint from us, you can be confident that it matches or exceeds original equipment specifications. We ensure swift dispatch across Europe, supported by customer service staff with hands-on mechanical know-how ready to answer technical driveline questions. We take pride in helping you keep your car performing at its best with premium car parts at competitive prices. Combining specialist focus, broad stock availability and comprehensive warranty coverage, we are your trusted source for Audi driveline maintenance.
Frequently Asked Questions about Drivetrain Parts for Audi A4 2.6 Quattro
How do I know if a CV joint has failed on my Audi A4 2.6 Quattro?
The most common sign is a clicking noise when turning on full lock while driving. Vibrations during acceleration can also indicate worn inner constant velocity joints.
Does the same front drive shaft fit both the left and right side?
This varies depending on the gearbox type and model year. Always select your car's make, model and engine to find the exact parts for your vehicle.
Why has the ABS warning light come on in my Audi A4?
On the Audi A4 2.6 Quattro, a cracked or corroded ABS ring is a very common cause. The reluctor ring sits on the CV joint and sends signals to the ABS sensor.
Is the propeller shaft on the Quattro model maintenance-free?
In theory yes, but in practice the centre bearing and universal joints wear out over time. Vibrations coming from underneath the centre of the car indicate that the prop shaft needs inspection.
What is included when I buy a CV joint kit from you?
Our kits normally include the CV joint, CV boot, grease, clamps, and a fitting bolt or nut to ensure a complete and reliable replacement.
How quickly can my spare parts be delivered?
We aim to dispatch all in-stock parts the very same day, ensuring prompt and dependable delivery across the EU directly from our Swedish warehouse.