Audi A4 3.0 Quattro
Car parts and drivetrain components for Audi A4 3.0 Quattro. Always check the fit before ordering.
Products for Audi A4 3.0 Quattro
- Position: Front left
- Flange diameter: 108 mm
- Total length: 616 mm
- Splines wheel side: 38
- ABS teeth: 45
- Position: Front right
- Flange diameter: 108 mm
- Total length: 638 mm
- Splines wheel side: 38
- ABS teeth: 45
- Position: Front right
- Flange diameter: 123 mm
- Total length: 490 mm
- Splines wheel side: 38
- ABS teeth: 45
- Position: Front left, Front right
- Flange diameter: 123 mm
- Joint diameter: 123 mm
- Total length: 544 mm
- ABS teeth: 45
- Diameter: 30 mm
- Height: 85 mm
- Hole spacing c/c: 228 mm
- Bearing thickness: 15 mm
- Position: Outer
- ABS teeth: 45
- Seal diameter: 59 mm
- Inner splines: 33
- Outer splines: 38
- Number of centre bearings: 1
- Number of joints: 3
- Total length: 1,565 mm
- Position: Front left, Front right
- Flange diameter: 123 mm
- Total length: 521 mm
- Splines wheel side: 38
- ABS teeth: 45
- Position: Front
- ABS teeth: 45
- Inner diameter: 77 mm
- Outer diameter: 81 mm
- Width: 11 mm
- Position: Front left
- Flange diameter: 123 mm
- Total length: 595 mm
- Splines wheel side: 38
- ABS teeth: 45
- Position: Front right
- Flange diameter: 123 mm
- Total length: 620 mm
- Splines wheel side: 38
- ABS teeth: 45
- Position: Rear
- Total length: 612 mm
- Splines wheel side: 38
- ABS teeth: 45
- Position: Rear left, Rear right
- Flange diameter: 108 mm
- Total length: 618 mm
- Splines wheel side: 37
- ABS teeth: 45
- Position: Inner
- ABS teeth: 0
- Inner splines: 28
- Joint diameter: 108 mm
- Outer diameter: 108 mm
- Flange diameter: 124 mm
- Total length: 490 mm
- Splines wheel side: 38
- Position: Outer
- ABS teeth: 45
- Seal diameter: 59 mm
- Inner splines: 27
- Outer splines: 38
Frequently asked questions about Drivetrain for Audi A4 3.0 Quattro
How do I know if my Audi A4 3.0 Quattro needs a new drive shaft?
Common signs include severe vibrations under acceleration or unusual noises from the underbody. If you notice the car shaking at specific speeds, it may be time to inspect the balance of the drive shafts and the condition of the joints.
Do all CV joints from the Audi A4 fit a 3.0 Quattro?
No, the 3.0 Quattro model often features heavy-duty components and a different spline count compared to models with smaller engines or front-wheel drive. Always select your vehicle's exact make, model and engine to ensure the correct fitment.
What causes a clicking noise when turning in my Audi?
This is a classic symptom of a worn outer CV joint. It is frequently caused by a split CV boot, which allows grease to escape and dirt to penetrate the joint.
Is it difficult to replace the ABS ring on an Audi A4 3.0 Quattro?
It requires dismantling the CV joint to access the ring. This is a common repair on vehicles driven in harsh European winter climates, where road salt and corrosion can cause the ring to crack.
Why does my car vibrate even though the wheels are balanced?
If the wheel balancing is correct, the vibrations may stem from a worn propeller shaft centre bearing or an inner CV joint that has developed play. This is particularly common on four-wheel-drive vehicles.
Do you offer a fitment guarantee on drivetrain parts?
Yes, we always provide a fitment guarantee when you select your vehicle's make, model and engine, giving you peace of mind that you will receive the correct part for your specific Audi model.