Audi A5 Convertible
Car parts and drivetrain components for Audi A5 Convertible.
Products for Audi A5 Convertible
- Position: Front left, Front right
- Flange diameter: 123 mm
- Total length: 458 mm
- Splines wheel side: 42
- Position: Front, Outer
- Inner splines: 28
- Outer diameter: 94 mm
- Splines wheel side: 42
- Position: Outer
- Seal diameter: 76 mm
- Inner splines: 27
- Outer splines: 42
- ABS teeth: 0
- Number of centre bearings: 1
- Diameter: 70 mm
- Number of joints: 2
- Total length: 1,529 mm
- Position: Front left, Front right
- Flange diameter: 123 mm
- Total length: 458 mm
- Splines wheel side: 42
- Position: Front, Inner
- Total length: 88 mm
- Splines gearbox side: 34
- ABS teeth: 34
- Position: Front left, Front right
- Flange diameter: 123 mm
- Joint diameter: 83,6 mm
- Total length: 466 mm
- ABS teeth: 0
- Position: Front, Inner
- Total length: 84 mm
- Splines wheel side: 24
- Total length: 626 mm
- Splines wheel side: 38
- ABS teeth: 0
- Position: Front left, Front right
- Flange diameter: 123 mm
- Joint diameter: 83,6 mm
- Total length: 466 mm
- ABS teeth: 0
- Total length: 626 mm
- Splines wheel side: 38
- ABS teeth: 0
- Position: Front left, Front right
- Flange diameter: 123 mm
- Joint diameter: 83,6 mm
- Total length: 466 mm
- Splines gearbox side: 42
- Total length: 626 mm
- Splines wheel side: 38
- ABS teeth: 0
- Position: Front left, Front right
- Flange diameter: 123 mm
- Joint diameter: 83,6 mm
- Total length: 466 mm
- ABS teeth: 0
- Position: Front left, Front right
- Flange diameter: 123 mm
- Joint diameter: 83,6 mm
- Total length: 466 mm
- ABS teeth: 0
- Position: Front left, Front right
- Flange diameter: 123 mm
- Joint diameter: 83,6 mm
- Total length: 466 mm
- ABS teeth: 0
- Position: Front left, Front right
- Flange diameter: 123 mm
- Joint diameter: 83,6 mm
- Total length: 466 mm
- ABS teeth: 0
- Position: Front left, Front right
- Flange diameter: 123 mm
- Joint diameter: 83,6 mm
- Total length: 466 mm
- ABS teeth: 0
- Position: Front left, Front right
- Flange diameter: 123 mm
- Joint diameter: 83,6 mm
- Total length: 466 mm
- ABS teeth: 0
- Position: Front left, Front right
- Flange diameter: 123 mm
- Joint diameter: 83,6 mm
- Total length: 466 mm
- ABS teeth: 0
Frequently asked questions about drivetrain parts for Audi A5 Convertible
How do I know if my Audi A5 Convertible needs a new drive shaft?
The most common symptoms are vibrations under acceleration, clicking noises at full steering lock, or visible grease leaking from the CV boots.
Do all drive shafts fit every Audi A5 Convertible model?
No, specifications vary depending on engine size, gearbox type (manual or automatic), and whether the car has front-wheel drive or Quattro. Always select your exact make, model and engine to find the right part.
What is the difference between an inner and outer CV joint on my Audi?
The outer CV joint sits at the wheel and accommodates steering angles, while the inner CV joint is located at the gearbox and primarily handles suspension travel and axial movement.
Can I replace just the CV boot if the joint still feels fine?
Yes, if you detect damage to the boot early before dirt has entered or the grease has escaped, replacing just the CV boot is often enough to save the joint.
Why does my Audi A5 Convertible vibrate during acceleration?
Vibrations under acceleration are a classic symptom of a worn inner CV joint. This is usually caused by pitting or grooving developing in the joint housing where the rollers run.
Is it difficult to replace a drive shaft on an Audi A5 Convertible yourself?
It requires appropriate tools and mechanical experience, particularly because the suspension setup on the Audi A5 is relatively complex. We recommend following a workshop manual.