Audi A5 3.0 TDI Quattro
Car parts and drivetrain components for Audi A5 3.0 TDI Quattro. Always check the fit before ordering.
Products for Audi A5 3.0 TDI Quattro
- Position: Front, Outer
- Inner splines: 28
- Outer diameter: 94 mm
- Splines wheel side: 42
- Position: Front, Inner
- Total length: 88 mm
- Splines gearbox side: 34
- ABS teeth: 34
- Position: Front left, Front right
- Total length: 465 mm
- Splines wheel side: 42
- Position: Rear left
- Total length: 587 mm
- Splines wheel side: 42
- Position: Rear right
- Total length: 545 mm
- Splines wheel side: 42
- Position: Outer
- Seal diameter: 76 mm
- Inner splines: 27
- Outer splines: 42
- Joint diameter: 100 mm
- Position: Outer
- Seal diameter: 76,5 mm
- Inner splines: 33
- Outer splines: 42
- Joint diameter: 88 mm
- Position: Rear left, Rear right
- Flange diameter: 100 mm
- Total length: 630 mm
- Splines wheel side: 42
- Position: Rear left, Rear right
- Flange diameter: 108 mm
- Total length: 632 mm
- Splines wheel side: 42
- Number of centre bearings: 1
- Number of joints: 2
- Total length: 1,529 mm
- Position: Front, Outer
- Inner splines: 25
- Outer diameter: 85 mm
- Splines wheel side: 42
- Position: Outer
- Seal diameter: 76,5 mm
- Inner splines: 29
- Outer splines: 42
- Position: Rear
- Number of joints: 3
- Total length: 1,434 mm
- Position: Rear
- Number of joints: 2
- Total length: 1,493 mm
- Position: Outer
- Seal diameter: 76 mm
- Inner splines: 28
- Outer splines: 42
- Position: Front, Inner
- Total length: 84 mm
- Splines wheel side: 24
- Position: Front left, Front right
- Flange diameter: 123 mm
- Total length: 469 mm
- Splines wheel side: 42
- Diameter: 30 mm
- Height: 116 mm
- Hole spacing c/c: 228 mm
- Bearing thickness: 15 mm
Frequently Asked Questions about the Drivetrain for Audi A5 3.0 TDI Quattro
How do I know whether the inner or outer CV joint is faulty on my Audi A5?
A worn outer CV joint typically makes a clicking noise when taking sharp corners. A faulty inner CV joint, on the other hand, causes vibrations through the vehicle during acceleration, whether you are turning or driving straight ahead.
Does the same drive shaft fit both the left and right side on an Audi A5 3.0 TDI Quattro?
No, on the Audi A5 3.0 TDI Quattro, drive shafts are usually side-specific due to the position of the gearbox and the layout of the Quattro system. Always check the product description to ensure the correct fitting position.
Why is it important to replace a damaged CV boot straight away?
The CV boot protects the CV joint from dirt and moisture whilst retaining the lubricating grease. If the boot tears or splits, the joint will wear out very quickly, resulting in a much more expensive replacement of the entire joint or shaft.
Do your CV joint kits include everything needed for replacement?
Yes, our CV joint kits are supplied complete with the joint itself, CV boot, high-performance grease, retaining clips and the mounting bolt or nut, depending on your vehicle's specifications.
Can a worn propeller shaft cause vibrations in my Audi A5?
Yes, the propeller shaft transmits power to the rear wheels, and if its centre bearing or universal joints are worn, it often creates vibrations felt throughout the entire bodywork, especially at speeds between 80 and 120 km/h.
How does your fitment guarantee work for the Audi A5 3.0 TDI Quattro?
When you select your vehicle's exact make, model and engine, we match the parts against your car's specific data. In the unlikely event that a part does not fit despite selecting the correct vehicle details, we will help you exchange it for the right part at no extra charge.