Audi A5 RS5 Quattro

Spare parts and drivetrain components for the Audi A5 RS5 Quattro. Confirm fitment by selecting your make, model and engine before ordering.

Products for Audi A5 RS5 Quattro

35 products
1 - 24 of 35
Item no.:351028
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 42
  • Outer diameter: 94 mm
  • Thread size: M16X1,5
Item no.:0894082
  • Inner diameter: 30 mm
Item no.:628010
  • Position: Rear
  • Total length: 1,614 mm
Item no.:4151099
  • Position: Rear left
  • Splines wheel side: 42
  • Total length: 587 mm
Item no.:5114443
  • Position: Rear right
  • Splines wheel side: 42
  • Total length: 545 mm
Item no.:145166
  • Position: Inner
  • Inner splines: 34
  • Total length: 88 mm
  • Joint diameter: 123 mm
  • Outer splines: 34
Item no.:7312571
  • Position: Front, Inner
  • Inner splines: 24
  • Total length: 84 mm
  • Joint diameter: 81 mm
  • Outer splines: 24
Item no.:3121543
  • Position: Front
  • Splines wheel side: 42
  • Total length: 465 mm
  • Joint diameter: 101 mm
  • Joint diameter, gearbox side: 123 mm
Item no.:6181707
  • Position: Rear
  • Splines wheel side: 42
  • Total length: 630 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:6192678
  • Position: Rear
  • Splines wheel side: 42
  • Total length: 632 mm
  • Joint diameter: 100 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:0560219
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 76 mm
  • Outer splines: 42
  • Thread size: M16X1,5
Item no.:626539
  • Position: Rear
  • Total length: 1,469 mm
Item no.:7305302
  • Position: Rear right
  • Splines wheel side: 42
  • Total length: 547 mm
  • Joint diameter: 100 mm
  • Flange diameter: 108 mm
Item no.:317878
  • Position: Front
  • Splines wheel side: 42
  • Total length: 463 mm
  • Joint diameter, gearbox side: 123 mm
  • Flange diameter: 123 mm
Item no.:0622952
  • Total length: 108 mm
  • Inner diameter: 22 mm
  • Outer diameter: 80 mm
  • Height: 85 mm
Item no.:0608873
  • Total length: 127 mm
Item no.:348915
  • Position: Front, Inner
  • Inner splines: 34
  • Joint diameter: 85 mm
Item no.:354608
  • Position: Front, Outer
  • Inner splines: 28
  • Seal diameter: 76 mm
  • Outer splines: 42
  • Thread size: M16X1,5
Item no.:620025
  • Position: Rear
  • Total length: 1,433 mm
  • Outer diameter 1: 99,7 mm
  • Bolt circle diameter 1: 86 mm
Item no.:0804052
  • Inner diameter: 30 mm
  • Bearing thickness: 15 mm
  • Hole spacing c/c: 241 mm
  • Height: 105 mm
Item no.:317167
  • Position: Front
  • Splines gearbox side: 42
  • Splines wheel side: 42
  • Total length: 465 mm
  • Joint diameter, gearbox side: 83,6 mm
Item no.:647210
  • Position: Rear, Inner
  • Inner splines: 28
  • Total length: 28 mm
Item no.:648407
  • Position: Inner
  • Inner splines: 28
  • Total length: 32 mm
Showing 1–24 of 35 products

Audi A5 RS5 Quattro drivetrain

The Audi A5 RS5 Quattro represents the pinnacle of German engineering, where a high-revving engine and an advanced all-wheel-drive system work together to deliver outstanding performance. Translating this immense power into sharp acceleration and road holding requires a drivetrain in immaculate condition. The drivetrain on an RS5 is subjected to substantially higher loads than on standard models in the A5 range, placing extreme demands on the strength, balance, and precision of every single component. As a Swedish driveline specialist, we at CVJoint24 offer a carefully chosen range of spare parts tailored specifically to meet the high standards of an Audi RS model. We understand that every link in the power transmission, from the gearbox output shaft to the wheel hub splines, must work in perfect harmony to maintain the car's distinctive handling and safety profile. Selecting the correct components ensures not only peak performance, but also the long-term reliability and value of your car on the road.

How the drivetrain works on the Audi A5 RS5 Quattro

The Audi A5 RS5 Quattro drivetrain is a sophisticated setup built around the permanent Quattro all-wheel-drive system. Engine power is directed through the gearbox to a central differential, which distributes torque between the front and rear axles. A robust Audi A5 RS5 Quattro propeller shaft runs beneath the car to transfer power to the rear differential. At the front, drive shafts must cope with tight steering angles and hard acceleration simultaneously. On an RS5, these components are frequently reinforced compared to standard versions to manage the high torque levels without suffering from material fatigue. The complete layout comprises four drive shafts and a prop shaft, each fitted with precision-machined CV joints that allow full vertical and horizontal articulation. This architecture underpins the car's legendary grip, but it also relies on all components—from bearings to CV boots—remaining in top condition to prevent energy loss and unwanted vibrations that could damage other transmission parts.

Common faults and symptoms

Despite the robust build quality of Audi RS models, driveline components face natural wear that can be accelerated by spirited driving and high operating temperatures. One of the most typical signs that an outer CV joint on an Audi A5 RS5 Quattro is failing is a rhythmic clicking or knocking noise, most noticeable when taking tight turns at low speeds. If you notice vague vibrations through the car body instead, particularly under hard acceleration, this often indicates play in an Audi A5 RS5 Quattro inner CV joint. Inspecting the drive shaft boots regularly is also vital; a split CV boot allows the protective grease to escape while letting road dirt and moisture in, rapidly ruining the precision-machined bearing surfaces inside the constant velocity joint. On Quattro-equipped vehicles, pay close attention to unusual sounds coming from the centre of the car, which can point to issues with the propeller shaft centre bearing or universal joints. Overlooking these warning signs can lead to costly consequential damage to differentials or the gearbox.

Common parts to replace on the Audi A5 RS5 Quattro

To make servicing your Audi A5 RS5 Quattro as straightforward as possible, we have assembled a selection covering the most critical driveline components. Our range is tailored to deliver the same precision and durability as the original equipment, but at a more competitive price. Here are the core categories for your car:

  • Drive shafts for Audi A5 RS5 Quattro
  • Outer CV joints for Audi A5 RS5 Quattro
  • Inner CV joints for Audi A5 RS5 Quattro
  • Propeller shafts for Audi A5 RS5 Quattro

By replacing worn parts in good time, you retain the precise steering feel and instant response that define an Audi RS model. We supply components designed to withstand the severe torque and high revolutions generated during performance driving. Investing in quality parts for your Quattro drivetrain ensures your car continues to deliver the thrilling performance expected of an RS badge.

Finding the right part for your Audi A5 RS5 Quattro

Navigate directly to the relevant category for your Audi A5 RS5 Quattro:

When dealing with a vehicle that has several potential driveline issues, starting in the correct category saves time. By comparing the exact sections for the Audi A5 RS5 Quattro, you can readily tell whether an issue lies with a drive shaft, a CV joint, or a prop shaft, and proceed to the page that matches your car's symptoms and fitment.

Pinpointing the exact replacement part for an Audi A5 RS5 Quattro requires precision, as RS models frequently feature unique technical specifications that distinguish them from standard cars. This can include specific spline counts, shaft lengths, or flange mountings unique to this vehicle's Quattro setup. To help you select the right part first time, simply filter by your car's make, model, and engine variant to display only guaranteed compatible parts. With carefully matched components for the RS5 Quattro, we eliminate guesswork and the risk of ordering the wrong item. If you need further guidance on which part will resolve your issue, our knowledgeable team is here to assist. We have extensive experience with Audi drivetrains and can advise you on everything from selecting a driveshaft to choosing the right companion seals to ensure a long-lasting, leak-free installation.

Why shop with CVJoint24

CVJoint24 is far more than an online retailer; we are your dedicated specialist for all things relating to the drivetrain and power transmission. As a Swedish driveline specialist, we supply an extensive range across the European Union with a depth of expertise that few can rival. When you shop with us, you benefit directly from our technical knowledge and commitment to quality engineering. We provide a dependable fitment guarantee, ensuring that the parts chosen to match your vehicle's make, model, and engine will fit correctly. Despatching directly from our central warehouse in Helsingborg, Sweden, we keep delivery times prompt across Europe so you can get your Audi A5 RS5 Quattro back on the road without delay. Combining high-standard car parts with a team that truly understands high-performance vehicles, we provide a smooth purchasing experience backed by true specialist knowledge.

Frequently Asked Questions about Drivetrain for Audi A5 RS5 Quattro

How do I know if my Audi A5 RS5 Quattro needs a new drive shaft?

The most common signs are vibrations under acceleration or unusual noises from the wheel arches. Because the RS5 delivers high power output, these components wear out faster under hard driving.

What is the difference between the inner and outer CV joint on an RS5?

The outer CV joint sits at the wheel and accommodates steering angles, whilst the inner joint sits at the gearbox or differential and accommodates axial movement.

Can I use drive shafts from a standard Audi A5 on my RS5?

No, the RS5 Quattro features reinforced shafts and unique dimensions to handle the higher torque. Always select your specific model and engine variant to find the correct part.

Why are there vibrations in my Audi RS5 at higher speeds?

This can be caused by an imbalance in the propeller shaft or wear in the prop shaft centre bearing, which is common on high-performance four-wheel-drive cars.

Do you offer a fitment guarantee on parts for the RS5 Quattro?

Yes, when you select your specific Audi A5 RS5 Quattro model and engine variant, we guarantee that the displayed parts will fit your car.

How quickly can I have my spare parts delivered?

We aim for next-day dispatch on most stocked items, ensuring your car is back on the road as quickly as possible.