Audi A6 2.3
Car parts and drivetrain components for Audi A6 2.3. Always check the fit before ordering.
Products for Audi A6 2.3
- Position: Front right
- Flange diameter: 108 mm
- Total length: 662 mm
- Splines wheel side: 38
- ABS teeth: 45
- Position: Outer
- ABS teeth: 45
- Seal diameter: 59 mm
- Inner splines: 30
- Outer splines: 38
- Position: Front
- ABS teeth: 45
- Inner diameter: 64 mm
- Outer diameter: 74 mm
- Width: 8,1 mm
- Position: Outer
- Inner splines: 30
- Outer diameter: 90 mm
- Splines wheel side: 38
- ABS teeth: 45
- Position: Outer
- ABS teeth: 45
- Seal diameter: 59 mm
- Inner splines: 30
- Outer splines: 38
- Position: Front
- ABS teeth: 45
- Inner diameter: 64 mm
- Outer diameter: 74 mm
- Width: 8,1 mm
Frequently asked questions about drivetrain parts for Audi A6 2.3
How do I know if my Audi A6 2.3 needs a new outer CV joint?
The most common symptom is a clicking noise from the front axle when turning sharply under acceleration. If the sound disappears when driving straight ahead, the outer CV joint is almost certainly worn.
What causes vibrations in my Audi A6 2.3 during acceleration?
Vibrations occurring specifically under load are often caused by wear in the inner CV joint. When play develops in the joint, it creates an imbalance in the drive shaft that resonates through the car.
Do all Audi A6 drive shafts fit regardless of the engine option?
No, drive shafts and CV joints often differ between engine variants, such as the 2.3, V6 or diesel models. It is therefore essential to select your car's make, model and engine to find the exact matching part for your Audi A6 2.3.
Why is the ABS warning light on in my Audi A6 2.3?
A very common fault on this model is that the ABS ring on the CV joint has cracked due to corrosion. This causes the wheel speed sensor to receive faulty signals, illuminating the warning light.
Can I replace just the CV boot if the CV joint is still working?
Yes, if you catch a split boot early and the joint has not started making noise, you can clean the joint thoroughly, repack it with fresh grease and install a new CV boot to prolong its service life.
What does your fitment guarantee mean for the Audi A6 2.3?
It means that when you select your specific model and engine details and order the recommended part, we guarantee it will fit your car. In the unlikely event that it does not fit, we will help you find the correct replacement.