Audi A6 2.8 Quattro

Spare parts and drivetrain components for the Audi A6 2.8 Quattro. Verify fitment by selecting your make, model and engine before ordering.

Products for Audi A6 2.8 Quattro

57 products
49 - 57 of 57
Item no.:0485449
  • Position: Inner
  • Inner splines: 33
  • Total length: 32 mm
Item no.:1156437
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 623 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:2193030
  • Position: Front right
  • Splines wheel side: 38
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
  • ABS teeth: 45
Item no.:359716
  • Position: Front, Outer
  • Inner splines: 30
  • Seal diameter: 53 mm
  • Outer splines: 33
  • ABS teeth: 45
Item no.:341174
  • Position: Front, Inner
  • Inner splines: 34
  • Seal diameter: 100 mm
  • Joint diameter: 85 mm
Item no.:0630587
  • Total length: 113 mm
Item no.:0912149
  • Inner diameter: 24 mm
  • Outer diameter: 40 mm
Showing 49–57 of 57 products

Audi A6 2.8 Quattro drivetrain

The Audi A6 2.8 Quattro represents an era of German engineering where durability and four-wheel drive took centre stage. This specific model variant, powered by the robust 2.8-litre V6 engine, demands a drivetrain that can cope with smooth yet powerful torque delivered to all four wheels. As a Swedish driveline specialist, we understand that every single component, from the smallest circlip to the complete drive shaft, plays a vital role in the car's overall balance. With an extensive range for this specific model, we cover everything from standard wear parts to specialist assemblies such as propeller shafts. Maintaining a Quattro drivetrain is not just about replacing broken components, but about preserving the precise handling feel Audi engineered into the car. We help you find the right parts to match your car's original performance, whether you drive in city traffic or on demanding winter roads.

How the drivetrain is engineered on the Audi A6 2.8 Quattro

The drivetrain layout on an Audi A6 2.8 Quattro is a sophisticated system built around Audi's longitudinal engine configuration. Power flows from the V6 engine into the gearbox, where an integrated Torsen centre differential splits the drive between the front and rear axles. To transfer drive to the rear, a robust propeller shaft is used, mounted with a centre bearing to minimise vibrations through the chassis. At the front axle, power is distributed to the wheels via two drive shafts, where the outer CV joints accommodate large steering angles while the inner CV joints absorb suspension travel. The rear axle operates similarly without the need for steering articulation, meaning the rear driveshafts often feature a different design. This entire setup functions in unison, and an imbalance in one component, such as a worn universal joint or a failing CV joint, can quickly transfer down the line and cause premature wear to gearbox seals and output bearings.

Common faults and symptoms

Catching drivetrain issues early is vital to avoid costly repairs on your Audi A6 2.8 Quattro. One of the most typical symptoms is a rhythmic clicking or knocking noise when turning sharply at low speeds, which almost always points to a worn outer CV joint. If you experience vibrations felt throughout the cabin instead, particularly under load or at specific speed ranges, it may indicate play in an inner CV joint or an out-of-balance propeller shaft. Another frequent issue on these models involves the ABS system. If the ABS warning light comes on intermittently or the brake pedal pulses when stopping on dry roads, inspect whether an ABS ring has cracked due to rust expanding beneath it. Paying close attention to these warning signs allows you to rectify the issue before a component fails completely.

Common parts to replace on the Audi A6 2.8 Quattro

When it is time to replace driveline parts on your Audi A6 2.8 Quattro, several key categories should be checked. We have structured our catalogue so you can easily locate what you need. For this model, we supply multiple drive shaft variants, covering front and rear fitments as well as different transmission options. Alongside complete shafts, we stock various individual outer CV joints and inner constant velocity joints, allowing you to renew just the worn joint if the shaft itself remains in sound condition. For the centre driveline, we offer balanced propeller shafts ready for installation. Finally, we stock 3 different types of ABS rings, which are vital for your braking safety systems. Selecting the correct replacement means taking your car's exact specifications into account, and our comprehensive range covers the technical variations across the 2.8 Quattro series.

Find the right part for your Audi A6 2.8 Quattro

Select the relevant category for your Audi A6 2.8 Quattro:

On a vehicle with several possible drivetrain faults, it is best to navigate straight to the correct section. By comparing the dedicated component categories for the Audi A6 2.8 Quattro, it becomes straightforward to distinguish between drive shaft, CV joint, or prop shaft issues and head directly to the page that matches your car's symptoms and fitment.

Why buy from CVJoint24

Buying from CVJoint24 means partnering with an expert team focused purely on driveline components. Rather than stocking general motor factors items like wiper blades or air fresheners, we focus entirely on the drivetrain, giving us an unmatched ability to supply the best range for your Audi A6 2.8 Quattro. Our promise of the right part every time is supported by a comprehensive fitment guarantee and knowledgeable technical assistance from staff who understand your car's mechanics. We know that when a drive shaft fails, you need your replacement promptly, which is why we prioritise rapid dispatch across the EU from our Swedish central warehouse in Helsingborg. By removing middlemen and insisting on high manufacturing standards, we deliver competitive prices without sacrificing durability. When ordering from us, you get high-quality spare parts engineered to keep your Audi running smoothly for many kilometres to come.

Frequently asked questions about drivetrain parts for Audi A6 2.8 Quattro

How do I know if my Audi A6 2.8 Quattro needs a new drive shaft?

Common signs include severe vibrations under acceleration or abnormal noises from underneath the car. If the vibrations disappear when you lift off the accelerator, the culprit is often an inner CV joint or the drive shaft itself.

Does the same CV joint fit both front and rear on a Quattro?

No, the CV joints usually differ between the front and rear axles on the Audi A6 2.8 Quattro. It is essential to check the fitting position (front/rear) and gearbox type before ordering.

Why is the ABS warning light on in my Audi A6?

A very common fault on the Audi A6 2.8 Quattro is a corroded or cracked ABS ring. This sends incorrect signals to the wheel speed sensor, causing the ABS light to illuminate or the brakes to pulse erratically.

What causes vibrations in the propeller shaft?

Vibrations from the propeller shaft are often caused by a worn centre bearing or universal joints that have begun to seize. Because the prop shaft rotates at high speed, even minimal imbalance will be felt inside the cabin.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, provided the shaft itself is straight and the splines are undamaged, you can save money by replacing just the outer or inner constant velocity joint using our complete repair kits.

How does your fitment guarantee work for the Audi A6?

When you select your car's exact make, model and engine, we match the parts against your vehicle's technical specifications. If we should happen to send an incorrect part despite the correct vehicle details being selected, we will help you exchange it for the right part at no extra charge.