Audi A7 Sportback 45 Tfsi Quattro

Spare parts and drivetrain components for the Audi A7 Sportback 45 Tfsi Quattro. Select your make, model and engine to ensure correct fitment.

Products for Audi A7 Sportback 45 Tfsi Quattro

6 products
1 - 6 of 6
Item no.:0497611
  • Position: Inner
  • Inner splines: 34
  • Outer splines: 123
Item no.:115064
  • Position: Front
  • Total length: 495 mm
  • Splines wheel side: 42
Item no.:0890977
  • Inner diameter: 30 mm
  • Width: 15 mm
Item no.:356062
  • Position: Front, Outer
  • Inner splines: 28
  • Outer diameter: 94 mm
  • Splines wheel side: 42
Item no.:318843
  • Position: Front left, Front right
  • Diameter: 106 mm
  • Flange diameter: 123 mm
  • Joint diameter: 104 mm
  • Total length: 495 mm
Item no.:350777
  • Position: Front, Outer
  • Inner splines: 28
  • Outer diameter: 94 mm
  • Splines wheel side: 42

Audi A7 Sportback 45 Tfsi Quattro Drivetrain

The Audi A7 Sportback 45 Tfsi Quattro represents a sophisticated blend of design and advanced engineering, where the drivetrain plays a pivotal role in the vehicle's dynamic driving characteristics. Maintaining the power transmission on a car with Quattro all-wheel drive is crucial for preserving the stability and traction for which the model is renowned. As specialists in drivetrain components, we supply the parts required to ensure your Audi continues to deliver power efficiently to the road surface. Every part in our range is selected to meet the high standards of precision and durability that Audi owners expect.

When looking for parts for your Audi A7 Sportback 45 Tfsi Quattro, it is vital to select components specifically tailored to this exact engine and drivetrain configuration. The 45 Tfsi engine paired with the Quattro system places unique demands on torque transmission and balance. We focus on providing parts that not only fit physically, but also perform under the loads generated during active driving. By choosing the right spare parts, you extend the service life of the entire system and avoid unnecessary consequential damage to more expensive components.

How the drivetrain is engineered on the Audi A7 Sportback 45 Tfsi Quattro

The drivetrain in an Audi A7 Sportback 45 Tfsi Quattro is a complex system running from the engine via the gearbox to all four wheels. Central to this system is Quattro technology, which intelligently distributes power between the front and rear axles depending on driving conditions. Power is transmitted via drive shafts equipped with both inner and outer CV joints. These joints allow the wheels to move vertically and steer while simultaneously receiving power from the engine. The inner CV joint sits closest to the gearbox or differential and primarily handles the axial movement of the drive shaft.

For a car like the Audi A7 Sportback 45 Tfsi Quattro, the precision of these components is critical. Because the system continually adjusts power distribution, every link in the chain must be in perfect condition to avoid vibrations or loss of torque. Components such as drive shafts and constant velocity joints operate under high pressure and are lubricated with special grease protected by CV boots. If a CV boot splits, dirt enters and grease leaks out, rapidly causing the mechanical components to wear down. Understanding this arrangement helps you as an owner recognise when it is time for servicing or replacing specific parts.

Common faults and symptoms

There are several distinct signs that the drivetrain on your Audi A7 Sportback 45 Tfsi Quattro requires attention. One of the most common symptoms of a worn inner CV joint is vibration felt through the car body under acceleration. Unlike wheel imbalance, which is often felt in the steering wheel at particular speeds, vibrations from an inner joint are directly linked to engine load. If you notice the car shaking when applying throttle, but smoothing out when releasing the pedal, this is a strong indication that an inner joint is failing.

Other frequent symptoms include noises at full steering lock, which often point to issues with the outer CV joints. A clicking or knocking sound that accelerates with vehicle speed is a classic sign. It is also essential to inspect the CV boots regularly. If you spot grease splatters on the inside of the wheel rim or around the wheel arch, a boot has likely split. Ignoring these symptoms can lead to total driveshaft failure, which in the worst-case scenario can leave the vehicle stranded and cause damage to the gearbox or differential.

Common parts to replace on the Audi A7 Sportback 45 Tfsi Quattro

On the Audi A7 Sportback 45 Tfsi Quattro, certain components are subject to heavier wear than others due to the vehicle's weight and potent drivetrain. The inner CV joint is one such part that frequently needs replacement to eliminate vibrations and restore ride comfort. We specialise in supplying high-quality alternatives that match original equipment specifications at a more competitive price. Here are the most relevant categories for your vehicle:

  • Inner CV joints for Audi A7 Sportback 45 Tfsi Quattro

In addition to the CV joints themselves, it is common to replace CV boots and related fitting hardware. When replacing a CV joint, we always recommend inspecting the overall condition of the drive shaft as well. Replacing worn parts in good time is an investment in your car's ongoing reliability. By choosing the right parts from our range, you ensure that your Quattro drivetrain continues to operate seamlessly and that power transfer remains efficient for many kilometres to come.

Finding the right part for your Audi A7 Sportback 45 Tfsi Quattro

Navigate directly to the relevant subcategory for the Audi A7 Sportback 45 Tfsi Quattro:

On a vehicle with several potential drivetrain issues, it is wise to start in the correct category straight away. By comparing the exact subcategories for the Audi A7 Sportback 45 Tfsi Quattro, it becomes easier to distinguish between faults in a driveshaft, CV joint or propeller shaft, and to proceed to the page that best matches your symptoms and fitment.

Finding the correct replacement part for a modern car like the Audi A7 Sportback 45 Tfsi Quattro can feel daunting due to numerous technical variations. The most reliable way to obtain the right part straight away is to filter by your car's make, model and engine. By selecting your exact vehicle details, our shop displays the components technically verified for your specific model and engine option. This eliminates guesswork and avoids incorrect orders that lead to frustrating repair delays.

When browsing our site, you can start at the broader level for Audi or go directly to Audi A7 Sportback to view the complete range. We advise always double-checking technical specifications, such as spline counts or diameters, where listed in the product description. Our customer service team consists of drivetrain specialists who are delighted to help if you are uncertain which part best suits your 45 Tfsi Quattro. With our guidance, you can select the correct part first time and be confident it will fit your car perfectly.

Why shop with CVJoint24

CVJoint24 is not just another car parts retailer; we are a Swedish driveline specialist with a sharp focus on drivetrains and power transmission. When you buy from us, you gain access to specialist expertise that is difficult to find in generic car parts outlets. We understand the technical subtleties of the Audi A7 Sportback 45 Tfsi Quattro and have curated our range to meet the precise requirements of demanding motorists. Our aim is always to deliver the right part at the right price, without compromising on quality.

We provide a dedicated fitment guarantee to give you complete peace of mind with your purchase. If you selected your vehicle by make, model and engine and a part does not fit, we resolve it swiftly and smoothly. Furthermore, we know how vital it is to get your car back on the road, which is why we dispatch stock items promptly across the EU from our Swedish central warehouse. Choosing us as your drivetrain partner provides technical knowledge, premium car parts and customer support that genuinely understands driveline systems. Your Audi deserves the best, and that is precisely what we deliver.

Frequently asked questions about Drivetrain for Audi A7 Sportback 45 Tfsi Quattro

What are the most common signs of a failing inner CV joint on my Audi A7?

The most common symptom is vibrations through the car's bodywork during acceleration. These vibrations often disappear once you lift off the accelerator. You might also notice a clunking or thumping noise at lower speeds.

Can I drive with a split CV boot on my Quattro?

It is not recommended. A split boot allows lubricating grease to escape and dirt to enter, which will ruin the CV joint in very short order. Replacing the boot promptly is far more cost-effective than having to replace the entire joint later.

Do all inner CV joints for the Audi A7 Sportback fit every engine variant?

No, specifications differ depending on the engine, gearbox and whether the car is Quattro all-wheel drive or front-wheel drive. Always select your vehicle's exact make, model and engine to find the correct part for your 45 Tfsi Quattro.

What is included when I purchase an inner CV joint from you?

Our CV joint kits are normally supplied complete with the joint itself, CV boot, specialised grease, clips, and any bolts or circlips required for proper installation.

How does the Quattro system affect wear on the drivetrain?

Because the Quattro system distributes power to all four wheels, all drive shafts and joints are subjected to load. It is therefore vital to inspect the condition of components on both the front and rear axles regularly.

Do you offer a fitment guarantee on parts for the Audi A7 Sportback 45 Tfsi Quattro?

Yes, we offer a fitment guarantee when you choose parts by selecting your car's make, model and engine. This ensures you receive the correct component tailored precisely to your vehicle's specific configuration.