Audi A8 S8 Plus Quattro

Spare parts and drivetrain components for Audi A8 S8 Plus Quattro. Verify fitment by selecting your make, model and engine before ordering.

Products for Audi A8 S8 Plus Quattro

17 products
1 - 17 of 17
Item no.:3199300
  • Position: Front
  • Splines wheel side: 42
  • Total length: 495 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 123 mm
Item no.:5136459
  • Position: Rear right
  • Splines wheel side: 42
  • Total length: 576 mm
Item no.:6180844
  • Position: Rear
  • Splines wheel side: 42
  • Total length: 660 mm
  • Joint diameter: 99 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:143874
  • Position: Inner
  • Inner splines: 34
  • Total length: 88 mm
  • Joint diameter: 123 mm
  • Outer splines: 34
Item no.:6284282
  • Position: Rear
  • Total length: 1,675 mm
  • Number of joints: 3
  • Number of centre bearings: 1
Item no.:4108469
  • Position: Rear left
  • Splines wheel side: 42
  • Total length: 620 mm
  • Diameter 2: 108 mm
Item no.:0856949
  • Inner diameter: 30 mm
Item no.:7313216
  • Position: Front, Inner
  • Inner splines: 24
  • Total length: 84 mm
  • Joint diameter: 81 mm
  • Outer splines: 24
Item no.:312786
  • Position: Front
  • Splines wheel side: 42
  • Total length: 490 mm
  • Joint diameter: 104 mm
  • Joint diameter, gearbox side: 123 mm
Item no.:0655761
  • Total length: 108 mm
  • Inner diameter: 22 mm
  • Outer diameter: 80 mm
  • Height: 85 mm
Item no.:646577
  • Position: Rear, Inner
  • Inner splines: 28
  • Seal diameter: 76,5 mm
  • Total length: 77 mm
  • Outer splines: 42
Item no.:644657
  • Position: Inner
  • Inner splines: 28
  • Total length: 32 mm
Item no.:0649217
  • Total length: 102 mm
Item no.:0646491
  • Total length: 127 mm
Item no.:347163
  • Position: Front, Inner
  • Inner splines: 34
  • Joint diameter: 85 mm
Item no.:351670
  • Position: Front, Outer
  • Inner splines: 28
  • Seal diameter: 76 mm
  • Outer splines: 42
  • Thread size: M16X1,5

Drivetrain for Audi A8 S8 Plus Quattro

Owning an Audi A8 S8 Plus Quattro means driving one of the most powerful and technically sophisticated cars in its class. To keep this high-performance luxury saloon performing at its peak, an impeccable drivetrain is vital to handle the immense power transfer from engine to tarmac. As Swedish driveline specialists, we understand the precise engineering demands of this flagship model. Every driveline component, from the gearbox to the wheel hubs, must work with absolute precision to preserve the stability and breathtaking acceleration that define an S8 Plus.

At CVJoint24, we are committed to providing the finest replacement parts for your Audi. By focusing on premium quality and exacting tolerances, we ensure the components you buy from us meet the rigorous standards expected by both the manufacturer and driving enthusiasts. Whether you need to restore that original, refined driving feel or prevent premature breakdowns, investing in the right driveline parts protects your car's longevity and safety.

How the drivetrain works on the Audi A8 S8 Plus Quattro

The drivetrain on an Audi A8 in S8 Plus Quattro specification is a masterclass in automotive engineering. Built around Audi's legendary Quattro all-wheel-drive system, it distributes power across all four wheels for maximum traction and composure. At the core of this system sits a robust propeller shaft transferring torque from the front-mounted transmission to the rear differential. This prop shaft must be balanced to perfection to eliminate vibrations, particularly at the high autobahn speeds of which this saloon is capable.

From the differentials, power travels through the drive shafts to each individual wheel. On an S8 Plus Quattro, these driveshafts are specifically engineered to endure tremendous torque loads. Each drive shaft is fitted with inner and outer CV joints that accommodate suspension articulation and steering movement while maintaining smooth, continuous power delivery. This complex arrangement demands that every constant velocity joint and shaft remains in prime condition to prevent energy loss and unwanted noise.

Common faults and symptoms

Despite the exceptional build quality of the Audi A8 S8 Plus Quattro, driveline components inevitably undergo wear over time, especially with spirited driving. One of the most typical signs of a worn outer CV joint is a distinct clicking or knocking noise when taking tight turns at low speeds. If you notice shuddering or vibrations under hard acceleration, worn inner CV joints on the drive shaft are frequently the cause. These telltale signs should never be overlooked, as neglected joint wear can trigger more severe driveline damage.

When it comes to the propeller shaft, the primary symptom is a low-frequency vibration felt through the car's floor and chassis, typically within specific speed ranges. This often points to an out-of-balance shaft or excessive play in the centre bearing and universal joints. Because the S8 Plus cabin is exceptionally quiet and insulated, subtle driveline noises and vibrations stand out quickly. Acting promptly on these symptoms saves on repair costs down the road while keeping your car's road manners fully intact.

Common parts to replace on the Audi A8 S8 Plus Quattro

On the Audi A8 S8 Plus Quattro, drive shafts and propeller shafts represent the primary focus of drivetrain maintenance. In our range, you will find components dedicated to this high-output model, covering both drive shafts and prop shafts. Drive shafts are critical for transferring power to the wheels, and on this Quattro model, both front and rear axles require attention. Split or perished CV boots are often the root cause of shaft failure, as dirt penetrates the joint and compromises the grease lubrication.

The propeller shaft is another vital unit that may require replacement if persistent driveline vibrations cannot be cured by balancing alone. Fitting a brand-new, factory-balanced prop shaft is often the most cost-effective, enduring way to restore the silky, refined ride of an S8 Plus. We stock replacement parts engineered to match original manufacturer specifications, ensuring your car retains its composed handling and effortless cruising ability.

Finding the right parts for your Audi A8 S8 Plus Quattro

Proceed to the relevant section for your Audi A8 S8 Plus Quattro:

When troubleshooting high-performance Quattro drivetrains, navigating directly to the correct component category saves valuable time. By comparing the exact part categories for the Audi A8 S8 Plus Quattro, it is straightforward to pinpoint whether you need a drive shaft, CV joint or complete prop shaft, leading you directly to parts tailored to your car's symptoms and fitment.

Locating the correct component for your Audi A8 S8 Plus Quattro is straightforward on cvjoint24.com. Because this high-performance model demands precise strength and dimension requirements, guesswork is never an option. We always recommend selecting your exact make, model and engine variant in our vehicle selector. This filters our catalogue down to parts confirmed to match your chassis specification, eliminating the inconvenience of ordering the wrong part.

To simplify your search, we have organised our range into clear categories. You can browse directly to the sections relevant to your car:

  • Drive shafts for Audi A8 S8 Plus Quattro - Complete shaft assemblies for both front and rear axles.
  • Propeller shafts for Audi A8 S8 Plus Quattro - Central prop shafts for efficient power transfer to the rear axle.
Following these links takes you straight to our dedicated product range for your model, where you can inspect detailed specifications and check real-time stock availability.

Why choose CVJoint24

CVJoint24 is far more than an online retailer; we are your expert partner for all things drivetrain and power transmission. As Swedish driveline specialists operating from our central warehouse in Helsingborg, Sweden, we combine in-depth technical knowledge with an extensive catalogue for European vehicles. When you source parts for your Audi A8 S8 Plus Quattro with us, you can trust that our car parts deliver lasting durability. We provide an exact-fit guarantee on every purchase, standing behind the fitment whenever you select parts via our model and engine filter.

We recognise how essential your car is to your daily life, and keeping workshop downtime to a minimum is a priority. That is why we work with dependable, rapid dispatch across the EU so your spare parts arrive swiftly. Guided by precision and technical expertise, our team aims to make your order seamless from start to finish. Our knowledgeable customer support team has deep technical experience and is ready to assist should you have any questions regarding your order or specific driveline components.

Frequently Asked Questions about Drivetrain Parts for Audi A8 S8 Plus Quattro

What are the most common signs that a drive shaft needs replacing on my S8 Plus?

The most common symptoms are clicking noises at full lock or vibrations through the steering wheel and chassis during acceleration. If you spot grease splattered on the inside of the wheel rim, this can also point to a damaged CV boot, which quickly leads to premature wear on the CV joint.

How do I make sure the propeller shaft fits my Audi A8 S8 Plus Quattro?

The most reliable method is to select your exact make, model and engine variant in our vehicle selector. The S8 Plus uses a specific prop shaft that differs from standard A8 models to cope with the increased power output, making it essential to choose the correct part number.

Do you offer a guaranteed fit on drivetrain components?

Yes, we always provide a fitment guarantee when you identify parts using our make, model and engine selector. This ensures complete peace of mind that the drive shaft or propeller shaft you order will fit your car perfectly.

Why is it important to replace a worn drive shaft promptly on a Quattro vehicle?

On a four-wheel-drive car such as a Quattro, power is distributed across all four wheels. A defective drive shaft can introduce imbalance throughout the entire drivetrain system, which at worst can cause unnecessary wear on the differentials and gearbox.

How quickly can I get my spare parts delivered?

We dispatch quickly from our central warehouse to ensure rapid delivery across Europe. We know your Audi A8 S8 Plus Quattro belongs on the road rather than stuck in the garage, so fast handling is our top priority.

Can I replace just the CV joint, or do I need to replace the complete drive shaft?

It depends on the extent of the damage. In many cases, changing just the CV joint is sufficient; however, for a high-performance model such as the S8 Plus, replacing the complete drive shaft assembly is often recommended to guarantee flawless balance and long-term durability.