Audi Coupé 1.8
Spare parts and drivetrain components for Audi Coupé 1.8. Check fitment by make, model and engine before ordering.
Products for Audi Coupé 1.8
- Position: Front left
- Splines wheel side: 33
- Total length: 586 mm
- Joint diameter: 90 mm
- ABS teeth: 45
- Position: Front right
- Splines wheel side: 33
- Total length: 573 mm
- Joint diameter: 90 mm
- ABS teeth: 45
- Position: Inner
- Inner splines: 33
- Seal diameter: 100 mm
- Total length: 34 mm
- Joint diameter: 100 mm
- Position: Outer
- Inner splines: 30
- Seal diameter: 53 mm
- Outer splines: 33
- ABS teeth: 45
- Position: Front left
- Splines wheel side: 33
- Total length: 586 mm
- Joint diameter: 90 mm
- Joint diameter, gearbox side: 100 mm
- Position: Front right
- Splines wheel side: 33
- Total length: 573 mm
- Joint diameter: 90 mm
- Joint diameter, gearbox side: 100 mm
- Position: Front, Outer
- Inner splines: 30
- Seal diameter: 53 mm
- Outer splines: 33
- Thread size: M14X1,5
- Position: Front, Outer
- Inner splines: 25
- Seal diameter: 56 mm
- Outer splines: 26
- ABS teeth: 46
Drivetrain for Audi Coupé 1.8
The Audi Coupé 1.8 is a model that combines timeless design with mechanical engineering that demands attentive maintenance, particularly when it comes to the drivetrain. The drivetrain is the core of the vehicle's power transmission, transferring power from the gearbox to the wheels. For an Audi Coupé 1.8, ensuring these components operate in complete harmony is vital for preserving its distinctive driving dynamics. As a Swedish driveline specialist, we offer an extensive range of parts tailored specifically to this engine variant and chassis type. Investing in the right spare parts is essential not only for reliable operation, but also for safeguarding the vehicle's value and delivering a confident driving experience for years to come.
How the drivetrain is configured on the Audi Coupé 1.8
The layout of the drivetrain on an Audi Coupé 1.8 is engineered for efficiency and durability. Power is produced by the 1.8-litre engine and routed through the gearbox to the front drive shafts. Each drive shaft features two joints: an inner CV joint positioned nearest the gearbox and an outer CV joint situated at the wheel hub. The inner joint accommodates axial travel as the suspension moves, whilst the outer constant velocity joint enables steering angles whilst continuing to transfer torque smoothly. On vehicles equipped with anti-lock braking, an ABS ring is also installed—typically on the outer CV joint—to send accurate speed signals to the safety systems. Understanding this configuration is the first step towards identifying the correct maintenance needed for your car.
Common faults and symptoms
There are several telltale signs that drivetrain components on your Audi Coupé 1.8 are beginning to wear. One of the most typical symptoms is a clicking or knocking sound when turning on full lock, which generally points to a worn outer CV joint. If you experience vibrations through the steering wheel or bodywork under acceleration, it may indicate that an inner CV joint or the driveshaft itself is worn or out of balance. Another frequent issue is an illuminated ABS warning light on the dashboard, often caused by a cracked or corroded ABS reluctor ring that fails to supply a clean signal to the sensor. By spotting these early warnings, you can prevent more extensive repairs and unexpected breakdowns on the road.
Common parts to replace on the Audi Coupé 1.8
When servicing or repairing your Audi Coupé 1.8, certain components naturally face more wear and tear than others. We have gathered the most frequently requested categories to help you find the right parts in our catalogue. Key components to inspect include:
- Drive shaft for Audi Coupé 1.8 – The complete assembly for power transmission.
- Outer CV joint for Audi Coupé 1.8 – Crucial for steering and wheel-end power delivery.
- Inner CV joint for Audi Coupé 1.8 – Accommodates articulation angles and movement near the gearbox.
- ABS ring for Audi Coupé 1.8 – Ensures the anti-lock braking system operates correctly.
Fitting new components with an exact fit ensures your Audi maintains peak performance. We always recommend inspecting the CV boots whenever checking the joints, as a split boot quickly allows grease to escape and road dirt to ruin the joint.
How to find the right part for your Audi Coupé 1.8
Browse directly to the relevant category for your Audi Coupé 1.8:
When dealing with drivetrain issues, starting in the correct category saves valuable time. By comparing the dedicated sections for the Audi Coupé 1.8, it becomes straightforward to distinguish between faults in a drive shaft, CV joint or propeller shaft and proceed to the page that matches your symptoms and specifications.
- Drive shafts for Audi Coupé 1.8
- Outer CV joints for Audi Coupé 1.8
- Inner CV joints for Audi Coupé 1.8
- ABS rings for Audi Coupé 1.8
Selecting the correct spare part for an Audi Coupé 1.8 can sometimes be complex due to slight technical changes across the production run. The most reliable way to select the right part is to filter our catalogue by your car's exact make, model and engine variant. It remains important to verify technical details such as the tooth count on the ABS ring or the dimensions of the CV joint, as these can vary depending on build date or equipment level. Our database is built to help you find the exact match straight away, preventing ordering errors and saving workshop time. If you need advice, our technical team is on hand to assist with your Audi Coupé.
Why choose CVJoint24
When you purchase from CVJoint24, you partner with a specialist possessing comprehensive expertise in driveline and power transmission components. We are driveline specialists committed to delivering premium quality for your Audi Coupé 1.8. With our accurate fitment standards, you can order with total confidence that the parts will fit your vehicle correctly. Dispatched swiftly from our central warehouse in Helsingborg, Sweden, our stock arrives across the EU to get your car back on the road without delay. By combining technical insight with dedicated customer support, we are the trusted choice for drivers who expect dependable driveline performance.
Frequently Asked Questions about Drivetrain for Audi Coupé 1.8
How do I know whether the inner or outer CV joint is worn on my Audi Coupé 1.8?
A worn outer CV joint usually produces a clicking noise when cornering, whereas an inner CV joint typically causes vibrations throughout the car under acceleration or at specific speeds.
Do all drive shafts fit the Audi Coupé 1.8 regardless of model year?
No, there can be differences in length and splines depending on the gearbox type and model year. Always filter by your exact make, model and engine variant to ensure the correct fitment.
Why is the ABS warning light on in my Audi Coupé 1.8?
A common cause is a cracked or heavily corroded ABS ring on the CV joint, preventing the sensor from reading the signal correctly. It is a standard wear-and-tear part that is straightforward to replace.
Are the CV boot and grease included when I buy a CV joint from you?
Yes, our CV joint kits come complete with a CV boot, grease, clamps and necessary hardware, allowing you to carry out a professional replacement right away.
Can I replace just the ABS ring, or do I need to replace the entire CV joint?
On the Audi Coupé 1.8, it is often possible to replace just the ABS ring if the constant velocity joint itself is otherwise in good condition, offering a cost-effective repair for the ABS system.
What does your fitment guarantee mean for my Audi?
Our fitment guarantee means that if you have selected your correct vehicle details and we have recommended a part that does not fit, we will help you find the correct replacement at no extra cost.