Audi Q3 35 TDI Quattro

Drivetrain parts and components for the Audi Q3 35 TDI Quattro. Select your make, model and engine before ordering to ensure correct fitment.

Products for Audi Q3 35 TDI Quattro

39 products
25 - 39 of 39
Item no.:0925014
  • Inner diameter: 65 mm
  • Outer diameter: 88 mm
Item no.:0612473
  • Total length: 127 mm
Item no.:0640907
  • Total length: 109 mm
Item no.:0632692
  • Total length: 110 mm
Item no.:0693152
  • Total length: 125 mm
Item no.:0981077
  • Inner diameter: 42 mm
  • Outer diameter: 83 mm
Item no.:142889
  • Position: Front left, Inner
  • Inner splines: 34
  • Seal diameter: 31 mm
  • Joint diameter: 85 mm
  • Outer splines: 37
Showing 25–39 of 39 products

Drivetrain for Audi Q3 35 TDI Quattro

The Audi Q3 35 TDI Quattro combines efficiency with the stability of all-wheel drive. To keep this balance working at its best, a drivetrain in top condition is essential. The drivetrain on an Audi Q3 35 TDI Quattro is subjected to considerable loads, particularly the torque from the 2.0-litre diesel engine, which must be distributed smoothly across all four wheels. Every component, from the gearbox to the wheel hubs, plays a critical part in delivering power without losses or vibrations. Here at CVJoint24 you will find the exact parts needed to maintain and repair your Audi Q3 so it retains its original driving characteristics. We understand the importance of precision in the Quattro system, where the slightest issue in a drive shaft or constant velocity joint can lead to secondary problems in the differential or power transfer unit. Choosing the correct spare parts ensures not only reliable operation, but also protects your car's resale value and long-term durability on the road.

How the drivetrain is engineered on the Audi Q3 35 TDI Quattro

The drivetrain layout on an Audi Q3 35 TDI Quattro is technically sophisticated and built around the Quattro all-wheel-drive system. Engine power is delivered through the gearbox to a central coupling unit that distributes torque between the front and rear axles. At the front, drive shafts connect directly to the front differential, while a propeller shaft carries power back to the rear axle. Each drive shaft is fitted with an inner and an outer CV joint. The outer CV joint allows the front wheels to steer while still receiving drive, while the inner CV joint accommodates the angular and plunge changes that occur as the suspension travels up and down. For the Audi Q3 35 TDI Quattro, these components are specifically dimensioned to manage the torque of the diesel engine and the vehicle's curb weight. It is a sealed system where grease lubrication and intact CV boots are vital to prevent premature wear across all mechanical components in the drivetrain.

Common faults and symptoms

There are several clear signs that the drivetrain on your Audi Q3 35 TDI Quattro is starting to wear. One of the most typical symptoms is a clicking or knocking noise on full steering lock during acceleration. This usually indicates that an outer CV joint has started to fail, often because a split CV boot has allowed dirt in and grease out. If you instead notice vibrations throughout the car under acceleration, especially at higher speeds, it often points to a worn or unbalanced inner CV joint. Other symptoms include grease or oil leaks around the driveshaft connections and noticeable imbalance through the steering wheel. It is vital to deal with these symptoms promptly; a failed CV joint can lead to complete drive shaft failure, which can leave you stranded. Regularly inspecting the condition of the boots is the easiest way to avoid costly repairs down the line.

Common parts to replace on the Audi Q3 35 TDI Quattro

When servicing or repairing the drivetrain on your Audi Q3 35 TDI Quattro, certain components are subject to more wear than others. Based on our catalogue data for this model, we offer a dedicated range covering the most frequent repair jobs. We supply complete drive shafts as well as individual inner and outer CV joints. Replacing an entire drive shaft is often more cost-effective than replacing individual joints if several components are worn. Here are the core categories for your car:

  • Drive shafts for Audi Q3 35 TDI Quattro
  • Outer CV joints for Audi Q3 35 TDI Quattro
  • Inner CV joints for Audi Q3 35 TDI Quattro

By selecting the right category, you can quickly find parts verified for the 35 TDI Quattro variant. Remember to inspect related hardware, such as hub bolts and circlips, whenever replacing driveline parts.

Finding the right part for your Audi Q3 35 TDI Quattro

Navigate to the correct section for your Audi Q3 35 TDI Quattro:

On a vehicle where driveline symptoms can overlap, starting in the right category saves time. By comparing the exact sections for the Audi Q3 35 TDI Quattro, it becomes much simpler to distinguish between drive shaft, CV joint or prop shaft issues and head straight to the parts that match your symptoms and exact fitment.

Finding the correct replacement part for a modern car like the Audi Q3 35 TDI Quattro can be tricky, as technical specifications often vary by production month and trim level. The most reliable way to ensure an exact fit is to filter by your car's make, model and engine variant in our store. For drive shafts, it is particularly important to check the overall length and the spline counts on both the inner and outer joints, as these can differ between gearbox codes and model years. We have done the groundwork by organising our catalogue by model, keeping the risk of ordering the wrong part to a minimum. If you are unsure which drive shaft or CV joint your Audi Q3 35 TDI Quattro requires, our specialist team is always here to guide you through the technical details for a smooth repair.

Why shop at CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, operating from our central warehouse in Helsingborg, Sweden. We focus entirely on power transmission and driveline components, giving us specialist technical expertise that general car-parts stores simply cannot match. When you order parts for your Audi Q3 35 TDI Quattro from us, you get high-quality car parts backed by our fitment assurance. We ship across the EU to get your vehicle back on the road without delay. Our standard is always the right part first time, achieved through verified technical data and close cooperation with leading manufacturers. With comprehensive coverage for your model, you can rely on an expert team that understands your car's drivetrain inside and out.

Frequently asked questions about drivetrain parts for Audi Q3 35 TDI Quattro

How do I know if my Audi Q3 35 TDI Quattro needs a new drive shaft?

The most common signs are vibrations under acceleration or unusual noises when driving. If you notice the car shuddering or grease leaking from the drive shaft boots, it is high time to check the condition of the shaft.

Do all Audi Q3 drive shafts fit my 35 TDI Quattro?

No, drive shafts vary depending on the engine variant, gearbox and whether the car has Quattro all-wheel drive. Always select your make, model and engine at cvjoint24.com to find the exact part for your car.

What is the difference between an inner and an outer CV joint?

The outer CV joint is located closest to the wheel and accommodates steering angles, whilst the inner joint sits closest to the gearbox and absorbs suspension movement. Symptoms of wear also differ between the two.

Can I replace just the CV boot if it is split?

Yes, if you catch a split CV boot early before dirt and moisture have damaged the joint itself, it may be enough to replace the boot and repack it with fresh grease. If the joint has already started making noise, the entire joint must be replaced.

How many drive shafts does an Audi Q3 35 TDI Quattro have?

Because it is a Quattro model, it has four drive shafts in total—two at the front and two at the rear—to drive all four wheels.

Do you offer a fitment guarantee on parts for the Audi Q3?

Yes, when you select your vehicle's make, model and engine with us at cvjoint24.com, your purchase is covered by our fitment guarantee, which means we guarantee the part will fit your specific vehicle model.