Audi Q7 3.6 FSI Quattro
Spare parts and drivetrain components for the Audi Q7 3.6 FSI Quattro. Select your car make, model, and engine to ensure correct fitment before ordering.
Products for Audi Q7 3.6 FSI Quattro
- Position: Front left, Front right
- Flange diameter: 112 mm
- Total length: 525 mm
- Splines wheel side: 30
- Position: Outer
- Seal diameter: 64 mm
- Inner splines: 27
- Outer splines: 30
- Joint diameter: 100 mm
- Number of centre bearings: 1
- Number of joints: 2
- Total length: 632 mm
- Height: 30 mm
- Inner diameter: 30 mm
- Bearing thickness: 68 mm
- Width: 19 mm
- Position: Rear
- Total length: 745 mm
- Seal ring diameter: 64 mm
- Splines wheel side: 30
- ABS teeth: 0
- Position: Front left, Front right
- Flange diameter: 112 mm
- Total length: 519 mm
- Splines wheel side: 30
- Number of centre bearings: 1
- Number of joints: 3
- Total length: 1,455 mm
- Number of centre bearings: 1
- Number of joints: 3
- Total length: 1,562 mm
Audi Q7 3.6 FSI Quattro drivetrain components
The Audi Q7 3.6 FSI Quattro is a powerful SUV that places high demands on its drivetrain. The power transmission in this model is engineered to handle both substantial kerb weight and the torque delivered by the 3.6 FSI engine. Maintaining the drivetrain is vital to preserve the car's performance and safety. Here at CVJoint24, you will find a dedicated range of components tailored specifically to this variant. We understand the technical challenges of the Quattro system and supply parts that meet or exceed original equipment specifications. Choosing the right spare parts extends the lifespan of your vehicle and ensures power is transferred effectively to the road. We focus on providing solutions that are straightforward to fit and offer long-lasting durability, whether you commute in city traffic or drive in more challenging conditions.
How the Audi Q7 3.6 FSI Quattro drivetrain is engineered
The drivetrain on an Audi Q7 3.6 FSI Quattro is a sophisticated system built around Audi's renowned Quattro technology. The engine is mounted longitudinally, sending power through the gearbox to a centre differential or transfer box. From here, power is distributed via propeller shafts to both the front and rear axles. The front axle is driven by dedicated drive shafts that must accommodate both steering angles and suspension travel. Because the Q7 is a heavy vehicle, these components endure significant stress, especially under hard acceleration and cornering. The system is designed for maximum traction, but this also means wear on parts such as the inner and outer CV joints can become noticeable over time. Understanding this complex layout is key to pinpointing the right replacement parts whenever the transmission shows signs of fatigue, keeping your four-wheel-drive system working as it should in all conditions.
Common faults and symptoms
Several clear signs indicate that your Audi Q7 drivetrain components are wearing out. One of the most frequent symptoms is vibration felt through the bodywork while driving, which can often be traced back to imbalance or wear in the prop shaft. If you hear a rhythmic clicking noise on full steering lock, this is a classic indicator that an outer constant velocity joint is failing, often caused by a split CV boot that has allowed dirt and moisture inside. Vibrations that occur specifically under acceleration point towards worn inner CV joints instead. Never ignore these warning signs, as a failing component can cause consequential damage to other driveline parts, including the gearbox or differentials. Acting promptly to replace worn parts will prevent costly repairs and keep your Audi reliable, quiet, and comfortable on long journeys.
Common replacement parts for the Audi Q7 3.6 FSI Quattro
For the Audi Q7 3.6 FSI Quattro, we have highlighted the most critical components that regularly require inspection to maintain reliability. Our range includes two different types of drive shafts, suited to the car's specific configuration and transmission requirements. We also see high demand for propeller shafts, stocking four different variants to cover every technical specification for this model. Alongside complete shafts, we stock individual CV joints, both inner and outer, allowing for targeted, cost-effective repairs. Replacing a complete driveshaft can often be more practical than overhauling an old unit, especially when factoring in workshop labour costs and overall service life. We select all our parts for their ability to withstand the heavy loads of a large SUV, ensuring dependable longevity once installed.
How to find the right part for your Audi Q7 3.6 FSI Quattro
Navigate to the relevant component section for your Audi Q7 3.6 FSI Quattro:
When troubleshooting driveline issues, starting in the correct category saves valuable time. By comparing the exact component sections for the Audi Q7 3.6 FSI Quattro, you can easily distinguish between problems in the drive shaft, CV joint, or propeller shaft, and head straight to the page that matches your symptoms and fitment.
- Drive shafts for Audi Q7 3.6 FSI Quattro
- Outer CV joints for Audi Q7 3.6 FSI Quattro
- Inner CV joints for Audi Q7 3.6 FSI Quattro
- Propeller shafts for Audi Q7 3.6 FSI Quattro
Following these links takes you directly to the correct parts for your vehicle. We have done the technical groundwork so you can select the right components first time and get back on the road without delay.
Why shop with CVJoint24
CVJoint24 is the international shop of a Swedish driveline specialist, supplying high-quality transmission and driveline components across the EU from our central warehouse in Helsingborg, Sweden. We combine in-depth technical expertise with an extensive range tailored to specific models like the Audi Q7. When you buy from us, you get quality car parts backed by our reliable fitment guarantee. We understand that your time is valuable, which is why we dispatch orders promptly to minimise your vehicle's downtime. Our catalogue makes finding the right part simple, whether you are a professional garage mechanic or an enthusiastic DIYer. By focusing exclusively on driveline systems, we offer product knowledge and customer support that general car-parts stores simply cannot match. Choose CVJoint24 for dependable components that perform flawlessly on your Audi Q7 3.6 FSI Quattro.
Frequently asked questions about drivetrain parts for Audi Q7 3.6 FSI Quattro
How do I know if the propeller shaft on my Audi Q7 needs replacing?
The most common signs are body vibrations that increase with speed, or a thumping noise from underneath the vehicle under acceleration. Checking the centre bearing and the universal joints on the prop shaft is recommended.
Do all drive shafts fit all Audi Q7 models?
No, drive shafts differ depending on the engine type, gearbox and model year. Always select your make, model and engine to ensure you receive the correct part for your 3.6 FSI Quattro.
What is included when I buy an outer CV joint kit?
Our kits are complete and typically include the CV joint itself, a model-specific CV boot, high-quality grease, circlips and the necessary clamps for correct fitting.
Why do vibrations occur during acceleration in my Audi Q7?
This is often caused by wear in the inner CV joints. When these become worn, play develops that results in vibrations as power transfers from the gearbox to the drive shafts.
Can I replace only the CV boot if the CV joint is still working?
Yes, if you catch a split or torn CV boot in time before dirt has entered and damaged the joint, you can replace just the boot. This is a cost-effective way to prevent a full joint replacement later on.
What does the fitment guarantee at CVJoint24 mean?
It means that when you select your vehicle's make, model and engine, we guarantee the part will fit. In the unlikely event that it does not, we will help you find the correct replacement at no extra cost.