Audi Quattro 2.2 Turbo

Welcome to CVJoint24, your Swedish driveline specialist for the Audi Quattro 2.2 Turbo. This iconic model, with its turbocharged engine and advanced four-wheel drive, places severe...

Products for Audi Quattro 2.2 Turbo

6 products
1 - 6 of 6
Item no.:411520
  • Position: Rear left
  • Splines wheel side: 26
  • Total length: 610 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:415833
  • Position: Rear left
  • Splines wheel side: 26
  • Total length: 610 mm
  • Joint diameter: 98 mm
  • ABS teeth: 96
Item no.:0454346
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 108 mm
Item no.:0102842
  • Splines wheel side: 26
  • Total length: 656 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
  • Flange diameter: 108 mm
Item no.:0149065
  • Splines wheel side: 26
  • Total length: 656 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
  • ABS teeth: 96
Item no.:0696261
  • Total length: 122 mm

Audi Quattro 2.2 Turbo Drivetrain

The Audi Quattro 2.2 Turbo is more than just a car; it is a symbol of technical innovation and a deep-rooted rallying heritage that changed the automotive world forever. For this powerful machine to deliver its full potential, it requires a drivetrain in peak condition. The transmission of power in a car with the legendary five-cylinder turbocharged engine is subjected to significant torque, especially during hard acceleration as boost pressure builds enormous force. This places extreme demands on every single component, from the gearbox and differentials down to the smallest CV joints. As specialists in All car makes, we understand the unique requirements of this classic model. Maintaining the drivetrain is vital for both driving pleasure and safety, particularly for a vehicle built to perform under demanding conditions and on varied surfaces. We supply the parts required to preserve the car's original driving feel and reliability over time, whether you are driving on the open road or the track.

How the drivetrain is configured on the Audi Quattro 2.2 Turbo

The layout of the drivetrain on an Audi Quattro 2.2 Turbo is a masterpiece of German engineering from an era where durability and mechanical precision were paramount. The system relies on a longitudinally mounted engine paired with a centre differential that splits power effectively between the front and rear axles. This permanent four-wheel-drive system, renowned as Quattro, is the very heart of the car's superior roadholding and traction. Power is transferred via a robust propeller shaft to the rear axle and via drive shafts to the front wheels, creating a balanced power distribution. Each drive shaft is equipped with both inner and outer CV joints that accommodate suspension travel and steering angles whilst delivering constant velocity power without loss. This sophisticated setup means that wear is distributed across multiple points, making it especially important to inspect components regularly. Understanding the interplay between the front and rear driveshaft assemblies is key to preserving the unique driving dynamics for which the Audi Quattro is globally acclaimed.

Common faults and symptoms

Symptoms of a failing drivetrain on an Audi Quattro 2.2 Turbo can vary, but they are often clear to an attentive driver who knows their car well. One of the most common signs is vibration through the chassis during acceleration, which frequently points to play developing in an inner CV joint. If you hear a rhythmic clicking noise at full steering lock when manoeuvring at low speeds, this is a classic indication that an outer constant velocity joint is worn and needs replacing. On a four-wheel-drive vehicle, an unbalanced prop shaft or worn centre bearings can also cause a low-frequency drone or annoying body vibrations at higher speeds. It is equally critical to watch for grease flung across the inside of the wheel rims or around the gearbox outputs, indicating a split CV boot. A torn drive shaft boot quickly allows dirt and moisture to penetrate the joint, resulting in total failure and expensive repairs if not addressed promptly. Ignoring these early warning signs can cause collateral damage to other transmission components, making maintenance even more costly.

Common parts to replace on the Audi Quattro 2.2 Turbo

When it comes to maintaining an Audi Quattro 2.2 Turbo, certain components face greater wear than others due to the car's performance-oriented nature. The inner CV joint is a critical part that regularly endures heavy strain from the engine's high torque output and the operating angles formed at the gearbox under hard acceleration. We offer dedicated solutions for this, such as Inner CV joints for Audi Quattro 2.2 Turbo, engineered to meet or exceed exacting original specifications. Beyond the joints themselves, high-grade rubber CV boot kits, heavy-duty circlips and premium molybdenum grease are essential service items that should always be replaced during an overhaul to guarantee maximum service life. Choosing the correct quality for these parts is crucial to the durability of the repair and how well the car performs under load. By selecting our high-quality replacement parts, you ensure that power delivery remains seamless and future vibration risks are minimised, protecting the value of your car and your driving enjoyment.

How to find the right part for your Audi Quattro 2.2 Turbo

Proceed to the relevant category for your Audi Quattro 2.2 Turbo:

On a vehicle with several potential driveline issues, it pays to start directly in the correct subcategory. By comparing the exact sections for the Audi Quattro 2.2 Turbo, it becomes much easier to distinguish between drive shaft, CV joint or propeller shaft issues and navigate to the page that best matches your symptoms and fitment needs.

Finding the correct replacement part for a classic performance vehicle like the Audi Quattro 2.2 Turbo can sometimes be challenging, but at CVJoint24 the process is straightforward and dependable. By selecting your car's make, model and engine in our lookup tool, our comprehensive catalogue is automatically filtered to show the parts that fit your specific vehicle. We currently stock dedicated items for this model within the inner CV joint category, demonstrating our deep stockholding even for rare classics. It is always wise to verify technical specifications, such as the spline count, if your vehicle has undergone modifications or upgrades over the years. For factory-original setups, our database provides outstanding accuracy and peace of mind. To assist your navigation and help you locate the correct component quickly, explore the following links:

Our goal is to ensure you order the right part first time, avoiding the hassle of incorrect orders and unnecessary returns.

Why shop with CVJoint24

CVJoint24 is your dedicated specialist for driveline and power transmission components for both modern and classic vehicles. As a Swedish driveline specialist shipping across the EU from our central Helsingborg warehouse, we provide not only an extensive product range but also technical expertise that is hard to match in the industry. We understand the importance of getting your Audi Quattro 2.2 Turbo back on the road without delay, dispatching quickly from stock. Every order is backed by our comprehensive fitment guarantee, taking the guesswork out of ordering the parts recommended by our vehicle selector. We strive to provide the right product at the right price, supported by customer service that genuinely understands the technical nuances of every drivetrain component. When you buy from us, you can trust that you are receiving parts chosen for their exceptional durability and precision, built to withstand demanding European road and weather conditions.

Frequently Asked Questions about Drivetrain for Audi Quattro 2.2 Turbo

How do I know if the inner CV joint on my Audi Quattro 2.2 Turbo has failed?

The most common symptom is body vibration under acceleration. Unlike outer CV joints that click when turning, worn inner joints are usually felt when driving straight ahead under load.

Do CV joints from other Audi models fit the Quattro 2.2 Turbo?

No, the Quattro 2.2 Turbo has specific requirements due to its all-wheel-drive system and high torque output. Always select your exact make, model and engine to ensure the correct fitment.

Are a CV boot and grease included when I buy a CV joint from you?

Yes, our CV joint kits come complete with a CV boot, grease, clamps and mounting hardware so that you can carry out a professional replacement right away.

How quickly can I get my parts delivered?

We dispatch stocked items quickly from our central warehouse, which is essential for minimising the time your Audi Quattro spends off the road in the garage.

What does your fitment guarantee mean?

It means that when you select your vehicle's make, model and engine variant, and we recommend a part that turns out not to fit, we take full responsibility for resolving it at no extra cost to you.

Are your parts reinforced to handle the torque of the turbo engine?

Our parts are engineered to meet or exceed original equipment specifications, ensuring they are robustly built to withstand the demands generated by the 2.2 Turbo engine.