BMW 1 Serie 118 D E87

Welcome to CVJoint24, your Swedish specialist for BMW 1 Serie 118 D E87 drivetrain components. We stock an extensive range of 24 carefully selected parts to keep your power delivery...

Products for BMW 1 Serie 118 D E87

35 products
1 - 24 of 35
Item no.:0335852
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 83 mm
  • Width: 12 mm
Item no.:0227783
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:0263021
  • Total length: 1,417 mm
  • Number of joints: 1
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
  • Outer diameter 2: 14 mm
Item no.:0358355
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 82 mm
  • Width: 12 mm
Item no.:6179816
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 614 mm
  • Joint diameter: 94 mm
  • ABS teeth: 48
Item no.:4140853
  • Position: Rear left
  • Splines wheel side: 27
  • Total length: 612 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:5110463
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 668 mm
  • Joint diameter: 88 mm
  • ABS teeth: 48
Item no.:0239081
  • Position: Rear
  • Total length: 1,350 mm
  • Number of joints: 3
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
Item no.:0202114
  • Total length: 1,443 mm
  • Number of joints: 2
  • Number of centre bearings: 1
Item no.:515125
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 664 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:0834916
  • Inner diameter: 30 mm
  • Bearing thickness: 13 mm
  • Hole spacing c/c: 160 mm
Item no.:6517223
  • Position: Outer
  • Inner splines: 24
  • Splines wheel side: 27
  • Outer diameter: 86 mm
  • ABS teeth: 48
Item no.:0488568
  • Position: Rear, Inner
  • Inner splines: 24
  • Outer diameter: 92 mm
Item no.:651076
  • Position: Rear, Outer
  • Inner splines: 24
  • Seal diameter: 57 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:0973052
  • Inner diameter: 44 mm
  • Outer diameter: 90 mm
Item no.:0693271
  • Position: Rear
Item no.:651264
  • Position: Rear, Outer
  • Inner splines: 25
  • Seal diameter: 69 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:643575
  • Position: Rear, Inner
  • Inner splines: 25
  • Joint diameter: 100 mm
  • Flange diameter: 100 mm
Item no.:627638
  • Position: Rear
  • Total length: 1,150 mm
Item no.:620240
  • Position: Rear
  • Total length: 1,460 mm
Item no.:647933
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
  • Thread size: M24X1,5
Item no.:640266
  • Position: Rear, Inner
  • Inner splines: 24
  • Seal diameter: 69,3 mm
  • Total length: 119 mm
  • Outer splines: 27
Item no.:642698
  • Position: Rear, Inner
  • Inner splines: 25
  • Total length: 26 mm
Showing 1–24 of 35 products

Drivetrain for BMW 1 Serie 118 D E87

The BMW 1 Serie 118 D E87 is renowned for its dynamic handling and compact rear-wheel-drive setup, which places demanding loads on every drivetrain component. The drivetrain is the core of the vehicle's power delivery, responsible for transferring torque from the efficient diesel engine directly to the rear wheels. For a model such as the 118d, where torque output is substantial, keeping every part of the assembly in peak condition is vital to prevent premature wear and sustain that signature BMW performance. At CVJoint24, we understand the technical nuances of the E87 platform and offer a curated range of parts that meet or exceed original equipment specifications.

Maintaining the drivetrain on your BMW 1 Serie 118 D E87 is not merely about fixing broken components; it is about preventing future failures. Choosing the right spare parts ensures that power is delivered smoothly and efficiently, reducing fuel consumption while prolonging the working life of surrounding mechanical assemblies. We focus on supplying parts precision-matched to the 118d variant, ensuring an accurate fit and straightforward installation for both DIY mechanics and professional garages.

How the drivetrain is engineered on the BMW 1 Serie 118 D E87

The drivetrain layout of the BMW 1 Serie 118 D E87 follows BMW's traditional formula: a longitudinally mounted engine driving the rear wheels. Power travels from the gearbox via a propeller shaft to the rear differential. From the differential, power is distributed to the road wheels through a pair of drive shafts. This layout provides the car with its balanced weight distribution and agile handling characteristics, but it also introduces several critical wear points that require regular checks. The prop shaft is split into sections, supported by a centre bearing that dampens vibrations and maintains the correct operating angle while driving.

The drive shafts on an E87 feature both inner and outer CV joints. The outer CV joint sits closest to the wheel hub, handling suspension articulation alongside torque transfer, whilst the inner constant velocity joint at the differential accommodates axial plunge. In addition, ABS rings are essential peripheral components within the drivetrain, sending precise wheel-speed signals to the vehicle's active safety systems. Understanding how these parts interact is key when diagnosing wear and selecting the correct car parts.

Common faults and symptoms

There are several telltale signs that the drivetrain on your BMW 1 Serie 118 D E87 requires attention. One of the most frequent symptoms is cabin vibration under acceleration, which often points to a worn centre bearing or an unbalanced propeller shaft. If you hear a rhythmic clicking noise when cornering at low speeds, this typically signals a worn outer CV joint, frequently caused by a split CV boot that has allowed grease to escape and grit to enter. Vibrations that occur only at specific road speeds can also indicate play in the inner CV joints.

Another common issue on the E87 platform is corrosion on the ABS rings. When these reluctor rings rust or crack, they produce distorted wheel-speed data, triggering ABS warning lights or causing unwanted ABS activation during normal braking. Addressing these symptoms promptly helps you avoid costly consequential damage. Ignoring minor noises from your driveline can eventually lead to complete component failure and roadside breakdown, making regular inspection of boots and bearings a sensible routine.

Common replacement parts for BMW 1 Serie 118 D E87

Our catalogue for the BMW 1 Serie 118 D E87 contains a total of 24 high-quality items covering the most critical categories. We stock a comprehensive selection of drive shafts with multiple options to suit every specification of this model. The prop shaft category is equally well covered, alongside 2 types of centre bearing designed to restore a smooth, vibration-free ride. For targeted repairs, we also supply individual inner and outer CV joints.

  • Drive shafts (12 items) – Complete units for fast, reliable replacement.
  • Propeller shafts (6 items) – For dependable longitudinal torque transfer.
  • Centre bearings (2 items) – Eliminates prop shaft vibration and harshness.
  • ABS rings (2 items) – Restores accurate wheel-speed sensing and braking performance.
  • CV joints (Inner & Outer) – For precision repairs to the driveshaft assembly.

By offering these dedicated parts, we make sure you find precisely what you need to restore your vehicle's drivetrain to factory performance. Each component is thoroughly engineered to withstand the strong torque of the 118d engine, giving you dependable durability over many miles.

How to find the right part for your BMW 1 Serie 118 D E87

Navigate directly to the relevant subcategory for your BMW 1 Serie 118 D E87:

When troubleshooting drivetrain issues, heading straight to the appropriate section saves time. By comparing the exact part categories for your BMW 1 Serie 118 D E87, you can easily distinguish between drive shaft, CV joint or propeller shaft problems and choose the section that best matches your symptoms and vehicle specification.

Our customer service team is always on hand if you have specific product queries or need assistance verifying technical measurements. Backed by our fitment guarantee, you can complete your order with complete peace of mind.

Why buy from CVJoint24?

CVJoint24 is not just another general car-parts seller; we are an international shop powered by a Swedish specialist in automotive drivetrains. This dedicated focus means we possess an in-depth understanding of every component we stock. Sourcing from our central warehouse in Helsingborg, Sweden, you gain access to an extensive range of niche parts for your BMW 1 Serie 118 D E87, readily available for rapid dispatch across the EU. We understand that workshop downtime is costly, so we work efficiently to process and ship orders promptly.

Our standard is always the correct part for the job. By pairing detailed vehicle technical data with hands-on mechanical know-how, we minimise the chance of ordering mistakes. Should a part ever fail to fit as expected, you are fully covered by our fitment guarantee. CVJoint24 is your dedicated partner for all driveline components, supplying robust, reliable parts at competitive prices without sacrificing safety or service life.

Frequently Asked Questions about Drivetrain for BMW 1 Series 118 d E87

How do I know if my BMW 118d E87 needs a new drive shaft?

The most common signs are vibrations under acceleration or unusual noises from the rear axle. If you notice the car shuddering under load, or if you spot a split CV boot leaking grease, it is high time to check the drive shaft.

What are the symptoms of a worn centre bearing on a BMW E87?

A failing propeller shaft centre bearing often produces a whining or grinding noise, as well as vibrations felt through the centre console or floorpan, especially at specific speed ranges.

Can I replace just the ABS ring on my BMW 1 Series?

Yes, on the BMW E87 it is often possible to replace only the ABS ring if the original has corroded and swollen, which is a much more economical option than replacing the entire drive shaft.

What is the difference between an inner and outer CV joint on a 118d?

The outer CV joint sits by the wheel hub and handles angular movement, whilst the inner joint sits by the differential and allows the shaft to plunge in and out as the suspension moves.

How does a worn propeller shaft affect driving?

An unbalanced or worn prop shaft causes severe vibrations throughout the car, which not only ruins ride comfort but can also damage the gearbox and differential over time.

Why is it important to filter parts by vehicle details?

The BMW 1 Series features several technical variations across models. By selecting your exact make, model and engine, you ensure you receive parts with the correct length, spline count and technical specification for your particular 118d E87.