BMW 1 Serie 135 I E82

Spare parts and drivetrain components for the BMW 1 Serie 135 I E82. Check fitment by make, model and engine before ordering.

Products for BMW 1 Serie 135 I E82

25 products
1 - 24 of 25
Item no.:0369302
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 83 mm
  • Width: 12 mm
Item no.:4181337
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 617 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:0284321
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:620083
  • Position: Rear
  • Total length: 1,355 mm
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 105 mm
Item no.:0814748
  • Inner diameter: 35 mm
  • Bearing thickness: 14 mm
  • Hole spacing c/c: 160 mm
Item no.:0898551
  • Inner diameter: 30 mm
  • Bearing thickness: 13 mm
  • Hole spacing c/c: 160 mm
Item no.:410197
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 611 mm
  • Joint diameter: 93,8 mm
  • Joint diameter, gearbox side: 111,3 mm
Item no.:516588
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 665 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:6532957
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 30
  • Outer diameter: 94 mm
Item no.:0430542
  • Position: Rear, Inner
  • Inner splines: 28
  • Outer diameter: 100 mm
Item no.:512878
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 663 mm
  • Joint diameter, gearbox side: 100 mm
  • Diameter 1: 94 mm
Item no.:513723
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 680 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:617249
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 653 mm
  • Joint diameter: 95 mm
  • Joint diameter, gearbox side: 106 mm
Item no.:617248
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 660 mm
  • Joint diameter, gearbox side: 100 mm
  • Flange diameter: 100 mm
Item no.:648241
  • Position: Rear, Inner
  • Inner splines: 25
  • Total length: 26 mm
Item no.:514090
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 663 mm
  • Joint diameter, gearbox side: 102 mm
Item no.:412810
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 635 mm
  • Joint diameter, gearbox side: 102 mm
  • Seal ring diameter: 60 mm
Item no.:0963549
  • Inner diameter: 44 mm
  • Outer diameter: 90 mm
Item no.:691997
  • Position: Rear
Item no.:690471
  • Position: Rear
Item no.:0698175
  • Position: Rear
Showing 1–24 of 25 products

Drivetrain for BMW 1 Serie 135 I E82

The BMW 1 Serie 135 I E82 is an iconic model renowned for its potent engine and rear-wheel-drive dynamics, placing substantial demands on the vehicle's drivetrain. Managing the high torque produced by its turbocharged straight-six engine requires components manufactured with maximum precision and durability. At CVJoint24, we appreciate the unique technical demands of the E82 platform. A properly functioning power transfer is vital to preserve the car's agile handling and ensure power reaches the road without losses or harsh vibrations. Choosing high-grade spare parts extends the service life of your car and guarantees a dependable driving experience, whether cruising daily or tackling demanding, twisty roads. Our catalogue is tailored to satisfy the rigorous expectations of BMW owners who insist on peak performance.

How the drivetrain works on the BMW 1 Serie 135 I E82

The drivetrain layout of the BMW 1 Serie 135 I E82 reflects sophisticated engineering aimed at optimal weight balance and efficient power transfer. Operating as a classic rear-wheel-drive layout with a longitudinally mounted engine, power travels through the gearbox into a propeller shaft for the BMW 1 Serie 135 I E82. This prop shaft runs along the vehicle underside to the rear differential, playing a key role in handling dynamics. The differential then distributes power across to the rear wheels via two heavy-duty drive shafts. Every element, from universal joints and centre bearings to inner and outer CV joints, plays an essential part in reducing energy loss. Because the 135i delivers significantly more power than smaller 1 Series models, drivetrain components face much higher loads, making tight production tolerances and robust materials essential for longevity and reliable operation.

Common faults and symptoms

Several clear symptoms indicate worn drivetrain components on your BMW 1 Serie 135 I E82. One frequent sign is a noticeable vibration through the body shell during acceleration, which often stems from an unbalanced propeller shaft or wear inside the inner constant velocity joints. A rhythmic clicking noise when cornering tightly at lower speeds typically points to an outer CV joint failing, often caused by a split CV boot allowing dirt to enter. A known issue on the E82 platform is a dashboard warning for the ABS or stability control (DSC). This is frequently caused by a corroded or fractured ABS ring on the BMW 1 Serie 135 I E82, which disrupts the wheel speed sensor readings. Ignoring these warning signs can quickly lead to expensive secondary damage to both the gearbox and differential.

Common replacement parts for the BMW 1 Serie 135 I E82

Drawing on extensive specialist data and workshop experience, specific components on this model require regular inspection. We stock a targeted range of vital components to maintain your car's reliability. For the BMW 1 Serie 135 I E82, our most requested parts include:

  • Drive shafts: Engineered variants designed specifically to withstand the substantial torque of the 135i.
  • Propeller shafts: 2 different designs available depending on the gearbox type and production year.
  • ABS rings: 1 high-grade option engineered to eliminate sensor fault issues reliably.

Each component is selected to align strictly with the technical parameters of the E82 135i. Replacing worn parts with correct-fit new components is the most dependable way to safeguard your car's dynamic performance and safety.

Finding the right part for your BMW 1 Serie 135 I E82

Navigate directly to the appropriate section for your BMW 1 Serie 135 I E82:

With multiple potential drivetrain faults, starting in the right category saves time. Comparing specific sections for the BMW 1 Serie 135 I E82 makes it simple to distinguish between drive shaft, CV joint or propeller shaft issues, guiding you to the page that matches your car's symptoms and fitment.

Our database is updated continuously with the latest specifications and compatibility data, giving you absolute confidence whenever you order from CVJoint24.

Why choose CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist shipping across the EU from its central warehouse in Helsingborg, Sweden. Our foundation rests on in-depth technical knowledge and a product range built on precision and durability. When shopping with us, our fitment guarantee ensures you receive parts that match your car precisely when selecting your make, model and engine variant. We understand the need to get your vehicle back on the road promptly, backed by quick dispatches and dependable delivery. Combining dedicated technical know-how with a smooth online buying experience, we ensure you secure the correct spare parts every time. We are committed to driveline precision and aim to be the premier choice for BMW 1 Serie 135 I E82 owners who demand quality, expertise and dependable service.

Frequently Asked Questions about Drivetrain for BMW 1 Serie 135 I E82

How do I know if a drive shaft on my BMW 135i E82 needs replacing?

The most common symptoms are vibrations under acceleration or a clicking noise on full steering lock. If you notice a split CV boot, you should act immediately to prevent the entire CV joint from being ruined.

Do all BMW 1 Series propeller shafts fit my 135i?

No, the 135i uses a specific propeller shaft engineered to handle significantly higher torque than smaller engine variants. Always select your exact make, model and engine to ensure the correct fit.

Why am I getting an ABS warning light on my BMW E82?

A very common fault is that the ABS ring on the drive shaft has corroded or cracked, preventing the sensor from reading the wheel speed correctly. Replacing the ABS ring is often a cost-effective fix.

What is covered by your fitment guarantee for the BMW 1 Serie 135 I E82?

Our fitment guarantee means that when you select your vehicle's make, model and engine and order the recommended part, we guarantee that it will fit your car correctly.

Can I replace drivetrain components on my BMW myself?

Yes, provided you have the proper tools and mechanical know-how, it is entirely feasible. We supply precision-fit parts that make the job considerably easier than using universal components.

How quickly can I receive spare parts for my BMW?

We dispatch quickly across the EU from our central warehouse for in-stock items, minimising downtime so your BMW 1 Serie 135 I E82 spends as little time in the garage as possible.