BMW 2 Gran Tourer

Welcome to your specialist for BMW 2 Gran Tourer drivetrain parts. Backed by Swedish driveline expertise, we understand the specific engineering demands of this practical family model....

Choose version

Choose a version to refine the results and get closer to the right product.

Products for BMW 2 Gran Tourer

48 products
25 - 48 of 48
Item no.:110476
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 535 mm
  • Joint diameter: 92 mm
Item no.:214740
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 905 mm
  • Joint diameter: 92 mm
Item no.:2109449
  • Position: Front right
  • Splines gearbox side: 34
  • Splines wheel side: 31
  • Total length: 499 mm
  • Thread size: M16x1.5
Item no.:618515
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 731 mm
  • Joint diameter: 76 mm
Item no.:352229
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 31
  • Seal diameter: 56 mm
  • Outer splines: 31
Item no.:7301606
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 31
  • Total length: 931 mm
Item no.:217071
  • Position: Front right
  • Splines gearbox side: 35
  • Splines wheel side: 31
  • Total length: 499 mm
  • Thread size: M16x1.5
Item no.:612307
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 733 mm
Item no.:0103984
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 545 mm
Item no.:2107121
  • Position: Front right
  • Splines gearbox side: 35
  • Splines wheel side: 31
  • Total length: 500 mm
Item no.:0189183
  • Splines gearbox side: 24
  • Splines wheel side: 31
  • Total length: 533 mm
Item no.:2111301
  • Position: Front right
  • Splines gearbox side: 35
  • Splines wheel side: 31
  • Total length: 499 mm
Item no.:2183450
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 904 mm
Item no.:612318
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 731 mm
Item no.:444216
  • Position: Rear, Inner
  • Inner splines: 30
  • Seal diameter: 43,75 mm
  • Total length: 188 mm
  • Outer splines: 27
Item no.:457066
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Total length: 62 mm
Item no.:113722
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 535 mm
  • Joint diameter: 92 mm
Item no.:217293
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 905 mm
  • Joint diameter: 92 mm
Item no.:216090
  • Position: Front right
  • Splines gearbox side: 35
  • Splines wheel side: 31
  • Total length: 499 mm
  • Thread size: M16x1.5
Item no.:0188405
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 545 mm
Item no.:114270
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 535 mm
  • Joint diameter: 92 mm
Item no.:210229
  • Position: Front right
  • Splines gearbox side: 35
  • Splines wheel side: 31
  • Total length: 499 mm
  • Thread size: M16x1.5
Item no.:0153961
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 545 mm
Item no.:118963
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 535 mm
  • Joint diameter: 92 mm
Showing 25–48 of 48 products

Drivetrain for BMW 2 Gran Tourer

The BMW 2 Gran Tourer represents a unique niche in the brand's history, focusing on generous space and family-friendly practicality without compromising the driving dynamics synonymous with the marque. The drivetrain in this model is engineered to cope with both stop-start city driving and long-distance touring with a full load, placing high demands on every individual component in the transmission system. As specialists in all car makes, we ensure you have access to parts that match original factory specifications, preserving your vehicle's balance and long-term durability.

Because this model is built on a modern front-wheel-drive architecture with a transversely mounted engine, its driveline components differ markedly from traditional rear-wheel-drive platforms. Selecting the correct spare part is therefore vital to avoid unnecessary wear on the gearbox and suspension. We supply a carefully curated range catering to the most common maintenance and repair needs for your vehicle's power transmission, always prioritising sustained reliability.

How the drivetrain is configured on the BMW 2 Gran Tourer

The drivetrain on a BMW 2 Gran Tourer is a sophisticated setup based primarily on front-wheel drive, though it is also available with the intelligent xDrive all-wheel-drive system. Engine power is transmitted through the gearbox to the wheels via precision-engineered drive shafts. For xDrive variants, added complexity comes in the form of a transfer box and a propeller shaft directing torque to the rear wheels when required. This arrangement requires every BMW-specific component to operate in complete harmony for optimal torque distribution.

Drive shafts are fundamental to this system, accommodating significant articulation angles and continuous suspension travel while handling high loads. The inner and outer constant velocity joints play a decisive role by facilitating this flexibility without loss of drive. On the BMW 2 Gran Tourer, these units are dimensioned to handle the car's gross vehicle weight and torque output, making it essential that replacement components adhere to the same exacting standards as factory equipment.

Common faults and symptoms

There are several telltale signs that drivetrain components on your BMW 2 Gran Tourer are wearing out. One of the most frequent symptoms is a clicking or knocking sound on tight turns at low speed. This typically points to a worn outer CV joint, frequently caused by a split CV boot allowing dirt and moisture into the joint. If you experience vibrations through the steering wheel or bodywork during hard acceleration, it often suggests an unbalanced driveshaft or a worn inner CV joint.

Another common symptom to watch for is grease or oil around the wheel arches or beneath the gearbox, indicating a failed shaft seal or torn boot. Ignoring these warnings can lead to more severe damage throughout the transmission system. Acting promptly to renew defective components helps prevent expensive secondary repairs and keeps your vehicle safe on the road.

Common parts to replace on the BMW 2 Gran Tourer

Depending on mileage and driving style, specific components are naturally more susceptible to wear than others. Our BMW 2 Gran Tourer catalogue includes a comprehensive selection of high-demand items, organised into the following categories to help you locate what you need quickly:

  • Drive shaft BMW 2 Gran Tourer – Complete shafts for both nearside and offside.
  • Outer CV joint BMW 2 Gran Tourer – For addressing knocking noises while cornering.
  • Inner CV joint BMW 2 Gran Tourer – For curing vibration issues under load.

Fitting a complete drive shaft can often be a faster and more economical repair than replacing individual joints, particularly when several parts along the shaft display signs of wear. Our components are manufactured to satisfy the precise demands of BMW chassis dynamics, ensuring hassle-free fitment and a long working life.

Finding the right part for your BMW 2 Gran Tourer

Proceed to the correct product section for your BMW 2 Gran Tourer:

When dealing with driveline issues, starting in the precise subcategory saves valuable time. By comparing the dedicated sections for the BMW 2 Gran Tourer, it is straightforward to pinpoint whether you need a drive shaft, a CV joint or a prop shaft, taking you directly to the parts matching your symptoms and specifications.

Identifying the exact component for your BMW 2 Gran Tourer is vital, as technical specifications vary across petrol and diesel engines, manual or automatic transmissions, and front-wheel drive versus xDrive. The most dependable method to ensure complete compatibility is to select your vehicle by its exact make, model and engine variant. This filters our catalogue directly to the matching parts, preventing incorrect orders and avoiding unnecessary vehicle downtime.

Once you are in the correct category, we also recommend checking technical details such as spline counts and overall shaft lengths where listed, ensuring absolute peace of mind. Our customer service team and technical documentation are readily available should you require guidance. With our support, you can order the right item straight away, confident that it will fit seamlessly with your car's existing drivetrain.

Why buy from cvjoint24.com

CVJoint24 is your specialist partner for driveline and power transmission components. As an international shop backed by Swedish driveline specialists, we supply a niche range that general motor factors simply cannot match. We focus exclusively on quality products engineered to withstand demanding European road conditions and satisfy the expectations of discerning BMW drivers. Our focus is straightforward: the right component at a competitive price, supported by knowledgeable technical guidance.

Choosing us gives you access to premium-grade spare parts alongside dedicated fitment support. We know how essential your car is to daily life, which is why we dispatch quickly from our warehouse in Helsingborg, Sweden, to minimise off-road time across the European Union. With thousands of satisfied customers and specialist driveline expertise, we are the trusted choice for your BMW 2 Gran Tourer. Order online with complete confidence from genuine drivetrain experts.

Frequently asked questions about drivetrain parts for BMW 2 Gran Tourer

How do I know if my BMW 2 Gran Tourer needs a new drive shaft?

The most common signs are vibrations under acceleration or unusual noises from underneath the car. If the vibrations increase with speed and can be felt through the bodywork, the cause is often a worn inner CV joint or an unbalanced drive shaft.

What is the difference between the inner and outer CV joint on this model?

The outer CV joint sits closest to the wheel and accommodates steering angles; wear here is usually heard as a clicking noise when cornering. The inner CV joint sits closest to the gearbox and primarily absorbs suspension movement; wear here typically causes vibrations.

Do your drive shafts fit both manual and automatic gearboxes?

This varies depending on the specific item. To be completely sure you receive the correct part for your gearbox, always select your vehicle's exact make, model and engine variant on our site.

Are CV boots and fitting accessories included when I buy a CV joint?

Yes, when you buy a CV joint from us, it is supplied as a complete kit including the CV boot, grease, clamps and any bolts or nuts required for installation.

Does the fitment guarantee also apply if I have an xDrive model?

Absolutely. Our fitment guarantee applies to all BMW 2 Gran Tourer models, provided that you have selected your exact make, model and engine variant when identifying the part, and that the vehicle has not been modified from its original specification.

How quickly can my parts be delivered?

We always dispatch orders as swiftly as possible from our central Swedish warehouse so you can get your BMW 2 Gran Tourer back on the road without delay.