BMW 3 Serie 325 XI E92

Quality drivetrain parts and components for your BMW 3 Serie 325 XI E92. Select your exact make, model and engine to ensure a correct fit.

Products for BMW 3 Serie 325 XI E92

33 products
1 - 24 of 33
Item no.:0315611
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 83 mm
  • Width: 12 mm
Item no.:1120526
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 571 mm
  • ABS teeth: 48
Item no.:4195560
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 617 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:2192610
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 892 mm
  • ABS teeth: 48
Item no.:0281329
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:0229029
  • Position: Front
  • Total length: 738 mm
  • Number of joints: 2
  • Outer diameter 1: 47 mm
  • Bolt circle diameter 1: 77 mm
Item no.:0245355
  • Position: Rear
  • Total length: 1,235 mm
  • Number of joints: 1
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
Item no.:247773
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 500 mm
  • Outer splines: 27
Item no.:352092
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 64,8 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:7302497
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 890 mm
  • ABS teeth: 49
Item no.:626690
  • Position: Rear
  • Total length: 1,513 mm
Item no.:1135548
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 564 mm
  • ABS teeth: 48
Item no.:513783
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 680 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:144170
  • Position: Front left, Inner
  • Inner splines: 24
  • Seal diameter: 43,95 mm
  • Total length: 180 mm
  • Outer splines: 27
Item no.:248085
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 29,97 mm
  • Total length: 502 mm
  • Outer splines: 27
Item no.:3535664
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 64,8 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:410348
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 635 mm
  • Joint diameter, gearbox side: 102 mm
  • Seal ring diameter: 60 mm
Item no.:0678673
  • Position: Rear
  • Total length: 124 mm
Item no.:391409
  • Position: Front
Item no.:0917050
  • Inner diameter: 44 mm
  • Outer diameter: 90 mm
Item no.:0695195
  • Total length: 110 mm
Item no.:0932409
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:698871
  • Position: Rear
Showing 1–24 of 33 products

Drivetrain for BMW 3 Serie 325 XI E92

The BMW 3 Serie 325 XI E92 represents a unique blend of sporty elegance and sophisticated all-wheel-drive engineering. As part of the BMW 3 Serie family, this E92 coupé places high demands on its drivetrain components to deliver the seamless power delivery expected of the marque. Maintaining the drivetrain on an XI model means taking care of both front and rear running gear, as engine torque is distributed between all four wheels. This requires greater component strength and precision compared to rear-wheel-drive variants.

We stock a specialist selection of parts tailored specifically to this model variant. We understand that every component along the line, from the gearbox to the wheel hub, must work in perfect harmony. Choosing the right spare parts preserves your car's performance as well as its long-term service life. Our focus is on supplying components that meet or exceed original equipment specifications, which is vital for a vehicle engineered with the sophisticated mechanics of the 325 XI E92.

How the drivetrain is engineered on the BMW 3 Serie 325 XI E92

The drivetrain of a BMW 3 Serie 325 XI E92 is built around the xDrive system, providing permanent yet variable all-wheel drive. Power leaves the engine and passes through the gearbox into a transfer case. From there, torque is directed via a BMW 3 Serie 325 XI E92 propeller shaft to both the front and rear differentials. This setup demands sturdy shafts and bearings capable of handling the severe loads generated during acceleration and cornering, especially given the characteristics of the 325 engine.

The front drive shafts on an XI model are shorter and more compact than on many other cars to fit alongside the engine, making them critical components during maintenance. The rear axle follows BMW's multi-link layout but is reinforced to cope with the extra load imposed by four-wheel drive. Every link in this chain, including CV joints and CV boots, plays an essential part in keeping friction losses and running vibrations to an absolute minimum. Understanding these engineering details is vital when choosing the correct replacement parts for any repair.

Common faults and symptoms

One of the most frequent symptoms of drivetrain problems on a BMW 3 Serie 325 XI E92 is a vibration felt through the bodyshell under acceleration. This is often traced back to imbalance or wear in the prop shaft or its centre bearing. Because the XI model uses an additional propeller shaft running forwards, there are more potential points where play can develop. If you notice a clicking noise on full steering lock, this is a classic sign that an outer CV joint on the front axle is failing, often caused by a split CV boot that has let dirt in and grease out.

Another specific issue on the E92 generation is corrosion on the ABS rings. When these reluctor rings rust or crack, they send distorted signals to the vehicle control units, triggering the ABS warning light or causing erratic all-wheel-drive behaviour. Symptoms such as jerking at low speeds or traction control warnings should always be investigated promptly, as they frequently indicate a mechanical drivetrain component that needs attention before consequential damage occurs to costlier units like the transfer case.

Common parts to replace on the BMW 3 Serie 325 XI E92

To keep your BMW in peak condition, we have identified the key components that most frequently require replacement during the vehicle's lifespan. Our stock is tailored to meet the needs of the 325 XI E92, focusing on the components subjected to the highest strain in the xDrive system. Here are the categories where we offer the widest selection for your car:

  • Drive shaft BMW 3 Serie 325 XI E92 (several variants available)
  • Propeller shaft BMW 3 Serie 325 XI E92 (5 distinct configurations for an exact fit)
  • ABS ring BMW 3 Serie 325 XI E92 (1 dedicated model for accurate sensor readings)

Replacing worn drive shafts in good time prevents ongoing vibrations that can compromise gearbox output seals. Similarly, a fresh propeller shaft is essential for preserving the silky-smooth ride for which BMW is renowned. We supply multiple prop shaft variants because specifications vary depending on transmission type and production date, giving you the assurance of finding the precise match for your vehicle.

Find the right part for your BMW 3 Serie 325 XI E92

Navigate directly to the relevant component section for your BMW 3 Serie 325 XI E92:

On a vehicle where several drivetrain faults can share similar symptoms, starting in the right category saves time. By comparing the specific subcategories for the BMW 3 Serie 325 XI E92, it is much simpler to distinguish between drive shaft, CV joint or propeller shaft faults and proceed straight to the section matching your symptoms and specifications.

Identifying the exact part for a BMW 3 Serie 325 XI E92 can be tricky due to technical variations across the E92 range. The most reliable way to explore our catalogue is to select your exact make, model and engine variant. Filtering by your car's exact vehicle details reveals the components guaranteed to match your chassis and drivetrain setup. This eliminates guesswork and ensures you receive replacement parts with the correct overall length, spline count and mounting dimensions.

When searching for parts such as a driveshaft or prop shaft, always verify whether the component is intended for the front or rear axle, as well as whether there are differences between the left and right sides. On XI models, the front drive shafts are handed and differ noticeably from the rear assemblies. If you ever need guidance on technical details, our specialist team is on hand to help. We want you to find the right part first time, avoiding unnecessary returns and keeping workshop downtime to a minimum.

Why buy from CVJoint24?

As a Swedish driveline specialist in All car makes, we provide an uncommon combination of technical expertise and parts availability. We are not a general auto-factors attempting to sell everything; our team focuses squarely on the heart of your car's power delivery. This gives us a much deeper grasp of the technical subtleties of vehicles like the BMW 3 Serie 325 XI E92 than general parts retailers possess. Our commitment to correct fitment and premium quality extends across our entire inventory.

When you order from us, you get high-quality car parts backed by our fitment assurance. Dispatched across the EU from our central warehouse in Helsingborg, Sweden, our products are shipped quickly so your project stays on schedule. Buying from a genuine specialist means getting the correct component, knowledgeable support and parts built to last. We aim to be the clear first choice for every BMW owner who insists on dependable drivetrain quality, whether you require an ABS ring or a complete drive shaft.

Frequently asked questions about drivetrain parts for BMW 3 Serie 325 XI E92

Which drivetrain parts are most commonly replaced on a BMW 325 XI E92?

The most common parts that need replacing are front drive shafts, propeller shafts and ABS rings. Due to the four-wheel drive system, the front CV joints are subjected to more wear and tear than on rear-wheel-drive models.

How do I know if the propeller shaft on my 325 XI is failing?

Typical symptoms include vibrations in the centre console or under the seat during acceleration, as well as a clunking noise when releasing the throttle or changing gear. This is often caused by wear in the universal joints or centre bearing.

Are the front and rear drive shafts identical on the BMW 325 XI?

No, the front and rear drive shafts differ significantly in both length and construction. In addition, the front driveshafts are usually side-specific (left and right).

Why is the ABS warning light on in my BMW E92?

A very common cause is a cracked or corroded ABS ring on the drive shaft. This disrupts the sensor signal and can also affect how the xDrive system distributes power.

How do I find the right part for my car?

Simply select your car's make, model and engine variant in our search filter to ensure you receive parts that fit your BMW 325 XI E92 perfectly.

What does the fitment guarantee at CVJoint24 mean?

Our fitment guarantee means we ensure the part fits your car when chosen using your exact make, model and engine details, giving you complete peace of mind with your purchase.