Drive shafts for BMW 3 Serie 325 XI E92

Looking for a replacement drive shaft for your BMW 3 Serie 325 XI E92? As a Swedish driveline specialist shipping across the EU, we provide a carefully chosen selection tailored to your...

Products for Drive shafts for BMW 3 Serie 325 XI E92

8 products
1 - 8 of 8
Item no.:1120526
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 571 mm
  • ABS teeth: 48
Item no.:4195560
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 617 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:2192610
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 892 mm
  • ABS teeth: 48
Item no.:7302497
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 890 mm
  • ABS teeth: 49
Item no.:1135548
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 564 mm
  • ABS teeth: 48
Item no.:513783
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 680 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:410348
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 635 mm
  • Joint diameter, gearbox side: 102 mm
  • Seal ring diameter: 60 mm
Item no.:516004
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 663 mm
  • Joint diameter, gearbox side: 102 mm

Drive shafts for BMW 3 Serie 325 XI E92

The BMW 3 Serie 325 XI E92 is a technically sophisticated car where the xDrive system places exacting demands on the drivetrain components. The drive shaft is a vital element in this system, tasked with transferring power from the differential out to the wheels across varying angles and loads. For a coupé like the E92, which is often driven with an emphasis on driving pleasure and precision, keeping the drive shafts in prime condition is essential for preserving the balance and punch that BMW is famous for. We supply dedicated solutions tailored specifically for the 325 XI variant, ensuring your vehicle retains its all-wheel-drive stability and performance in all road conditions. By choosing proper quality, you prevent unnecessary wear on other parts of the driveline.

What does the drive shaft do on a BMW 3 Serie 325 XI E92?

The drive shaft on a BMW 3 Serie 325 XI E92 carries the vital job of delivering torque from the gearbox and differentials to the road wheels. Because this is an XI model equipped with all-wheel drive (xDrive), driveshafts are fitted both front and rear. The front drive shafts work under particularly demanding conditions, as they have to cope with power delivery and steering angles simultaneously. A drive shaft consists of an axle shaft with joints at both ends that accommodate suspension travel and steering movements without disrupting power delivery. On an E92 325 XI, high manufacturing precision in these components is critical to ensure the xDrive system divides torque seamlessly between the front and rear axles. A healthy drive shaft minimises driveline drag and ensures engine output reaches the tarmac cleanly, which is fundamental to the car's handling dynamics.

Common signs of wear

Drive shaft wear usually reveals itself through distinct mechanical symptoms. One of the most frequent indicators of a failing outer CV joint is a rhythmic clicking or knocking noise when taking sharp corners at low speed. If vibrations arise under acceleration instead, this often points towards a worn inner CV joint. For the BMW 3 Serie 325 XI E92, inspecting the CV boots for physical damage is equally vital. If a boot tears, lubricating grease escapes and road dirt penetrates, which rapidly ruins the joint. Further symptoms include vehicle imbalance at motorway speeds or grease splattered inside the wheel rim or around the wheel arch. Overlooking these warning signs can result in complete failure, which in the worst cases risks damaging the differential or gearbox.

Choosing the correct drive shaft

Finding the correct drive shaft for a BMW 3 Serie 325 XI E92 requires care, as specifications can vary depending on build year and factory equipment. Several factors must be taken into account, such as overall shaft length, the number of splines (teeth) on both ends, and whether your model relies on specific ABS rings on the shaft. To make ordering straightforward and reliable, select your car by its exact make, model and engine variant. This filters our catalogue to the parts that match your specific vehicle. With our comprehensive range for this model, you can be sure of finding the right replacement for your needs. Always check that the new shaft matches the dimensions and layout of the original unit prior to fitting to ensure a perfect fit.

Related parts to check

We also recommend inspecting these exact pages for the same car when working on the drive shaft:

When one drivetrain component starts showing wear, neighbouring parts on the same car often warrant inspection too. By reviewing these exact pages for the BMW 3 Serie 325 XI E92, you can more easily determine whether the issue lies purely in the drive shaft or in an adjacent section of the driveline.

This is particularly relevant on models where vibrations, play and noises can transfer between interconnected drivetrain components. A quick look at related categories reduces the risk of replacing one correct part while overlooking an adjacent component that causes the same underlying fault.

Why shop with cvjoint24.com

CVJoint24 is the international shop of a Swedish driveline specialist shipping across the EU from our warehouse in Helsingborg, Sweden. We understand how essential it is to receive the correct part for your BMW 3 Serie 325 XI E92 the first time around, which is why we guide you accurately by vehicle make, model and engine. Our commitment focuses on premium product quality and deep technical know-how, enabling us to stock an extensive range that few general parts factors can match. We specialise specifically in drive shafts, CV joints and propeller shafts so that you can buy with total confidence. With reliable European shipping, we minimise downtime for your vehicle in the garage. When shopping with us, you receive high-grade spare parts selected by specialists to withstand the demands of your BMW, offering a sensible choice for drivers who refuse to compromise on quality or safety.

Frequently asked questions about drive shafts for BMW 3 Series 325 xi E92

How do I know if the drive shaft fits my BMW 325 xi E92?

The most reliable way is to select your vehicle by make, model and engine variant in our search filter. This filters out the drive shafts specifically suited to your car's chassis and drivetrain.

Is there a difference between the front and rear drive shafts on a 325 xi?

Yes, because the car features xDrive all-wheel drive, the front and rear drive shafts are completely different in both length and design. Always check the fitting position before ordering.

What are the most common symptoms of a failing drive shaft on a BMW E92?

The most frequent signs are clicking noises when turning, vibrations under acceleration, or grease splattered inside the wheel arch caused by a torn CV boot.

Are CV joints included when I buy a complete drive shaft?

Yes, our complete drive shafts are supplied with both inner and outer CV joints as well as pre-fitted CV boots, ready for direct installation.

Can a worn drive shaft affect the car's all-wheel-drive system?

Yes, imbalance or play in a drive shaft can generate vibrations that interfere with the xDrive system sensors and, in the worst cases, lead to premature wear on the transfer case.

How quickly can my new drive shaft be delivered?

We dispatch all in-stock parts promptly from our central warehouse, helping you get your BMW 325 xi E92 back on the road without delay.