BMW 3 325 D

Welcome to your drivetrain specialist for the BMW 3 325 D. As Swedish driveline specialists shipping across the EU, we offer a carefully chosen range of drivetrain components to keep...

Products for BMW 3 325 D

2 products
1 - 2 of 2
Item no.:648076
  • Position: Rear, Inner
  • Inner splines: 30
  • Splines gearbox side: 27
  • Total length: 175 mm
Item no.:451004
  • Position: Rear, Outer
  • Inner splines: 28
  • Splines wheel side: 30
  • Total length: 133 mm

Drivetrain for BMW 3 325 D

The BMW 3 325 D is a car model that combines sporty driving dynamics with a punchy diesel engine, placing high demands on the vehicle's drivetrain. The drivetrain is the system that transfers power all the way from the engine to the wheels, and in a car with such substantial torque as the 325 D, every component is subjected to significant mechanical stress. Maintaining the drivetrain is not only a matter of comfort, but also of safety and the overall lifespan of the vehicle. At CVJoint24 you will find the specific parts needed to maintain your car's original driving feel. We understand the technical nuances of this model and supply only components that meet or exceed original standards, which is essential for trouble-free driving over many thousands of kilometres to come.

How the drivetrain is structured on the BMW 3 325 D

The layout of the drivetrain on a BMW 3 325 D is engineered to handle the torque of the six-cylinder engine with precision. The system starts at the engine and runs via the gearbox to the propeller shaft, which in turn distributes power to the differential. From the differential, drive shafts extend out to the rear wheels. Each drive shaft is fitted with two critical articulation points: an inner CV joint and an outer CV joint. The inner joint is mounted to the differential and allows the shaft to plunge as the suspension moves up and down. The outer joint sits at the wheel and accommodates suspension travel and, where applicable, steering angles. On a BMW 3 325 D, these components are sized to withstand heavy acceleration, but they also rely on intact CV boots to retain lubrication and keep dirt out.

Common faults and symptoms

There are several warning signs indicating that a component in your car's drivetrain is beginning to fail. One of the most classic signs of a worn outer CV joint is a rhythmic clicking or knocking noise that occurs during sharp turns at low speeds. If the sound disappears when you drive straight ahead, the outer joint is almost certainly the culprit. For the inner CV joint, the symptoms are different; wear is typically felt as vibrations or shuddering throughout the car during acceleration, particularly under heavy load. Another common failure is a cracked CV boot. If you spot grease splattered on the inside of the wheel rim or inside the wheel arch, the boot has torn. If this is not sorted quickly, dirt and water will enter the joint, leading to premature failure of the entire component.

Common parts to replace on the BMW 3 325 D

When it is time for repairs or maintenance on your BMW 3 325 D, certain parts are more frequently required in the workshop. We specialise in supplying exactly what you need to restore your power transmission. Here are the most relevant categories for your car:

  • Outer CV joint for BMW 3 325 D - The most common part to replace when noises occur while cornering.
  • Inner CV joint for BMW 3 325 D - Critical for eliminating vibrations under acceleration.
  • CV boots - The most cost-effective way to prevent expensive joint replacements by keeping the grease in and dirt out.

By focusing on these specific parts, you can ensure that your BMW 3 stays in peak condition. We always recommend inspecting both sides of the car at the same time, as wear is often similar on the left and right sides.

How to find the right part for the BMW 3 325 D

Navigate directly to the right category for your BMW 3 325 D:

On a car with several potential drivetrain faults, it is best to start in the correct section immediately. By comparing the exact component sections for the BMW 3 325 D, it becomes easier to pinpoint issues with the drive shaft, constant velocity joint or prop shaft, and proceed to the category that best matches your symptoms and fitment requirements.

Navigating the sea of spare parts can be challenging, but at cvjoint24.com we have made it simple. The most dependable way to find the correct component for your BMW 3 325 D is to select your vehicle's make, model and engine variant. Once chosen, our system filters out only the parts that are technically compatible with your specific chassis and engine. This is particularly important for BMW owners, as drive shaft dimensions can differ depending on whether the car has a manual or automatic gearbox, as well as the specific suspension fitted. Our catalogue is tailored to deliver the right match straight away, saving you time and avoiding returns. If you ever feel uncertain about choosing the right components within the All car makes section, our customer service team is on hand to assist with expert advice.

Why shop at cvjoint24.com

CVJoint24 is not just another car parts shop; we are the international store of a Swedish driveline specialist, with our central warehouse in Helsingborg, Sweden, dedicated entirely to drivelines and power transmission. Our expertise means we provide an extensive range and technical know-how that few others can match across the EU. When you choose us, you benefit from our accurate fitment guidance so you can be confident that the parts you select will fit your car. We know your time is valuable, which is why we process and ship orders promptly to keep workshop downtime to a minimum. Find the right part first time and rely on top-quality components. We combine specialist knowledge with straightforward online ordering, making us the clear choice for anyone looking after their BMW 3 325 D.

Frequently Asked Questions about Drivetrain for BMW 3 325 D

What are the most common signs of a failing outer CV joint on my BMW 3 325 D?

The most common symptom is a clicking or knocking noise clearly heard when making sharp turns, such as when parking. The noise usually speeds up in time with wheel rotation.

Why does my BMW 3 325 D vibrate under heavy acceleration?

Vibrations during acceleration are a typical sign that an inner CV joint is worn. This is often caused by pitting or grooving in the joint's tracks, which creates an imbalance when torque is transmitted.

Can I use the same CV joint across all BMW 3 Series models?

No, CV joints are often specific to the engine type and gearbox. A 325 D typically requires sturdier components than smaller engine variants to handle the higher torque. Always select your exact make, model and engine to find the right match.

What is included when I buy a CV joint from you?

Our CV joint kits are complete and include the joint itself, a vehicle-specific CV boot, high-grade grease, circlips and the necessary clamps for a complete installation.

How quickly can my spare parts be delivered?

We offer fast dispatch for the majority of our stocked items, meaning your parts are shipped quickly directly from our central warehouse.

Does the fitment guarantee apply if I select the wrong part myself?

Our fitment guarantee applies when you select your vehicle by make, model and engine variant. If our catalogue suggests a part that turns out not to fit, we will help you find the correct replacement at no extra charge.