BMW 6 Serie 640 D Xdrive F12

Spare parts and drivetrain components for the BMW 6 Serie 640 D Xdrive F12. Verify fitment by selecting your make, model and engine before ordering.

Products for BMW 6 Serie 640 D Xdrive F12

27 products
1 - 24 of 27
Item no.:5172326
  • Position: Rear right
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 826 mm
  • Diameter 1: 96 mm
Item no.:1124017
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 560 mm
  • Joint diameter: 86 mm
Item no.:2140104
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 863 mm
  • Joint diameter: 86 mm
Item no.:0455497
  • Position: Front left, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 184 mm
  • Joint diameter: 82 mm
Item no.:0558478
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 65 mm
  • Outer splines: 37
  • Thread size: M16X1,5
Item no.:0205938
  • Position: Front
  • Total length: 730 mm
  • Number of joints: 2
  • Outer diameter 1: 47 mm
  • Bolt circle diameter 1: 77 mm
Item no.:244174
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 485 mm
  • Outer splines: 27
Item no.:411234
  • Position: Rear left
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 774 mm
  • Diameter 1: 96 mm
Item no.:394146
  • Total length: 56 mm
  • Diameter: 24 mm
Item no.:518796
  • Position: Rear right
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 830 mm
Item no.:417290
  • Position: Rear left
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 777 mm
  • Joint diameter: 94 mm
Item no.:243192
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 29,97 mm
  • Total length: 484 mm
  • Outer splines: 27
Item no.:642947
  • Position: Rear, Inner
  • Inner splines: 28
  • Seal diameter: 65 mm
  • Total length: 139 mm
  • Outer splines: 30
Item no.:648503
  • Position: Rear, Inner
  • Inner splines: 28
  • Seal diameter: 49,9 mm
  • Total length: 158,5 mm
  • Outer splines: 32
Item no.:0648331
  • Position: Rear
  • Total length: 77 mm
Item no.:0648040
  • Position: Rear
  • Total length: 124 mm
Item no.:392414
  • Diameter: 24 mm
  • Height: 56 mm
Item no.:0636699
  • Total length: 110 mm
Item no.:0982530
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:1132946
  • Position: Front left
  • Splines gearbox side: 30
  • Splines wheel side: 37
  • Total length: 564 mm
Item no.:392562
  • Position: Front
Showing 1–24 of 27 products

Drivetrain for BMW 6 Serie 640 D Xdrive F12

The BMW 6 Serie 640 D Xdrive F12 represents the peak of German engineering, where luxury meets raw power. With its muscular six-cylinder diesel engine producing massive torque, the car's drivetrain is placed under constant, heavy load during every burst of acceleration. The xDrive system—BMW's intelligent all-wheel-drive system—actively distributes torque between the front and rear axles in a fraction of a second. This places exceptionally high demands on every single driveline component, from drive shafts to constant velocity joints and propeller shafts, requiring them to work in absolute harmony. As a dedicated specialist in drivetrain components, we understand the distinct technical demands and tolerances for this exact model. Maintaining and replacing worn parts in good time is vital to preserve the car’s precise handling and prevent minor vibrations from causing expensive secondary damage to major units such as the transfer box or differentials. We provide only components that match or exceed strict OEM specifications, giving you complete peace of mind behind the wheel of your BMW.

How the drivetrain is configured on the BMW 6 Serie 640 D Xdrive F12

The drivetrain layout on the BMW 6 Serie 640 D Xdrive F12 is a sophisticated, heavy-duty setup engineered to manage high power alongside continuously variable torque distribution. Power leaves the engine via the eight-speed automatic gearbox and enters a centrally mounted transfer box. From there, torque is routed through two separate propeller shafts: a sturdy rear prop shaft running to the rear differential and a more compact front prop shaft directing power to the front differential. From these differentials, power travels to the road wheels through four drive shafts. While this advanced configuration delivers superior traction in all weather conditions, it also introduces more rotating parts, bearings and joints that face mechanical wear over time. Each driveshaft is fitted with an inner and an outer CV joint; the front outer CV joints endure the highest stress, as they must handle high torque whilst simultaneously managing wide steering angles. Understanding this intricate setup is essential when diagnosing the exact source of an unexpected noise or vibration.

Common faults and symptoms

Symptoms of developing drivetrain trouble on a BMW 6 Serie 640 D Xdrive F12 may start small, but they can deteriorate rapidly. One of the clearest indicators is a vibration felt through the floorpan or steering wheel during hard acceleration, often pointing directly to a worn inner CV joint or an imbalance in one of the propeller shafts. If you hear a repetitive clicking noise when taking sharp turns at low speeds, such as during parking manoeuvres, it is a classic sign that an outer CV joint is failing. You should also listen for humming, whining or rumbling noises beneath the car, which frequently signal a worn propeller shaft centre bearing. Another critical area to check is the CV boots: if a rubber boot splits, the essential lubricating grease escapes while road grime and moisture get in. This causes rapid wear to the precision-machined bearing surfaces inside the joint. Inspecting these parts regularly and taking action at the first sign of abnormal noise will help you prevent total mechanical failure that could leave your car stranded.

Common parts to replace on the BMW 6 Serie 640 D Xdrive F12

Due to the substantial kerb weight and powerful diesel engine of the BMW 6 Serie 640 D Xdrive F12, certain driveline parts experience higher rates of wear. In our comprehensive selection for the BMW 6 Serie, we have brought together the most vital replacement components to restore your vehicle to factory standard:

  • Drive shaft BMW 6 Serie 640 D Xdrive F12 – Specific variants engineered for both the front and rear axles, built to cope with the high torque output of the diesel engine.
  • Outer CV joint BMW 6 Serie 640 D Xdrive F12 – A precision-engineered component vital for smooth steering and reliable power transfer at the front wheels.
  • Inner CV joint BMW 6 Serie 640 D Xdrive F12 – Designed to accommodate axial plunge and eliminate driveline vibrations near the differential and gearbox.
  • Propeller shaft BMW 6 Serie 640 D Xdrive F12 – We offer 2 distinct propeller shaft options to guarantee vibration-free, smooth power transfer between the axles.

By fitting the right spare parts from a dedicated specialist, you ensure that the complex xDrive system operates freely, avoiding the strain that worn or incorrect parts can create.

Finding the right part for your BMW 6 Serie 640 D Xdrive F12

Select the relevant category for your BMW 6 Serie 640 D Xdrive F12 below:

On a vehicle with several possible driveline issues, selecting the correct category from the start saves time. By comparing the exact part areas for the BMW 6 Serie 640 D Xdrive F12, you can quickly differentiate between drive shaft, CV joint or propeller shaft faults and navigate straight to the items that match your symptoms and exact vehicle specifications.

Our extensive parts database is kept up to date with the latest OEM references, ensuring you can order the correct component the first time and avoid unnecessary returns or workshop delays.

Why choose CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, supplying high-grade parts across the European Union directly from our central warehouse in Helsingborg, Sweden. Unlike general car parts retailers, we concentrate exclusively on drivetrain and power transmission components, giving us an exceptional level of technical know-how and deep product coverage. When ordering replacement parts for your BMW 6 Serie 640 D Xdrive F12 from us, you benefit from our guaranteed fitment when selecting your make, model and engine variant. By maintaining extensive stock in Sweden, we ensure fast, reliable delivery throughout Europe, cutting workshop downtime to a minimum. We pair top-tier components with friendly service and knowledgeable technical advice, making sure you receive the exact part you need right to your door.

Frequently Asked Questions about Drivetrain for BMW 6 Series 640 d xDrive F12

How do I know if my BMW 640d xDrive needs a new drive shaft?

The most common signs are body vibrations during acceleration or unusual noises from the wheel arches. If you notice the car shuddering under load, it is often the inner joint or the drive shaft itself that has worn out.

Do parts from rear-wheel drive 6 Series models fit my xDrive model?

No, xDrive models often feature distinct dimensions, splines and mountings to accommodate the four-wheel-drive components. Always select your car's exact make, model and engine to ensure the correct fitment.

What is included when I buy a CV joint for my BMW from you?

Our CV joints are supplied as complete kits containing the joint itself, a model-specific CV boot, high-quality grease, circlips and the necessary clamps for a professional replacement.

How quickly can I have the parts delivered?

We offer prompt dispatch across the EU on most in-stock items. If you order early in the day, parts are dispatched the same day to keep your car's downtime to a minimum.

Is it difficult to replace the propeller shaft on a BMW 6 Series F12?

It is an involved job that requires proper tools and a thorough understanding of BMW's xDrive system. We recommend having the work carried out by a professional garage to ensure accurate balancing and correct torque tightening.

Why is it important to replace a damaged CV boot immediately?

A split CV boot allows the grease to escape and lets road dirt in. If you replace the boot straight away, you can save the CV joint; if you wait too long, the joint wears out rapidly and the entire joint or drive shaft will need replacing.