BMW 7 Serie 740 D

Welcome to your driveline specialist for the BMW 7 Serie 740 D. As a Swedish driveline specialist, we supply an extensive range of high-grade components designed to cope with the...

Products for BMW 7 Serie 740 D

7 products
1 - 7 of 7
Item no.:5173711
  • Position: Rear right
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 826 mm
  • Diameter 1: 96 mm
Item no.:247620
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 485 mm
  • Outer splines: 27
Item no.:417541
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 649 mm
  • Joint diameter: 103 mm
  • Joint diameter, gearbox side: 116 mm
Item no.:417984
  • Position: Rear left
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 774 mm
  • Diameter 1: 96 mm
Item no.:519972
  • Position: Rear right
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 830 mm
Item no.:418552
  • Position: Rear left
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 777 mm
  • Joint diameter: 94 mm

Drivetrain for BMW 7 Serie 740 D

The BMW 7 Serie 740 D represents the pinnacle of German engineering, combining executive luxury with a powerful, high-torque diesel engine. To deliver this power smoothly to the road surface while preserving exceptional comfort and precision, the drivetrain must remain in peak mechanical condition. The power transmission on a 740 D undergoes considerable strain, particularly during brisk acceleration when peak engine torque tests every component. As a specialist in the BMW 7 Serie, we understand the exacting demands placed on this particular model variant. We only supply parts that are technically verified to handle the specific loads produced by the 740 D engine. Maintaining your drivetrain is not merely a matter of reliability; it also preserves the refined driving dynamics that define a luxury BMW. By fitting the right components, you ensure your car remains as quiet, smooth and stable as when it left the factory.

How the drivetrain is engineered on the BMW 7 Serie 740 D

The drivetrain architecture on a BMW 7 Serie 740 D is an intricate assembly of components working in unison to transfer torque from the gearbox down to the driven wheels. The setup begins with a robust propeller shaft running along the car's centre tunnel. This shaft is precision balanced to prevent unwanted vibrations and is supported by a carefully positioned centre bearing that absorbs chassis flex and movement. Further outwards at the wheels, you will find the drive shafts, which feature both inner and outer CV joints. These constant velocity joints are vital for accommodating suspension travel and steering angles while rotating at high speed. On the 740 D model, these assemblies are often reinforced compared to smaller-engine variants to handle the increased load. Every element in this line, from differential to wheel hub, must function without excessive play to eliminate driveline lash and prevent premature wear.

Common faults and symptoms

Driveline wear on a BMW 7 Serie 740 D can often start subtly, yet it escalates quickly if left unaddressed. One of the most classic warning signs is a rhythmic clicking or snapping noise when turning tightly at low speeds, which almost invariably points to a worn outer CV joint. Conversely, if you notice vibrations through the floorpan or chassis during hard acceleration, the culprit is often an inner CV joint that has developed excess play. Along the prop shaft, the most frequent symptom is a high-pitched whining or rumbling sound from underneath the centre console, indicating that a centre bearing has reached the end of its service life. It is equally essential to inspect the CV boots regularly; a split CV joint boot allows road dirt to enter and grease to escape, causing rapid joint failure. Ignoring these symptoms can easily lead to far more expensive secondary damage to both the differential and the automatic gearbox.

Popular replacement parts for BMW 7 Serie 740 D

Based on our extensive experience and technical data, certain components are placed under heavier strain than others on the BMW 7 Serie 740 D. We stock a comprehensive selection of drive shaft variants to suit the specific engineering updates of this model. In many cases, replacing the complete drive shaft is far more economical and time-efficient than overhauling individual joints, particularly on vehicles with higher mileage. Alongside driveshafts, the propeller shaft centre bearing is another frequent replacement part, as the rubber mounting deteriorates with age and loses its damping properties. We also supply a range of outer CV joints to ensure an exact fit for your vehicle. By keeping these vital components in stock, we help you get your BMW back on the road promptly with parts built to match its factory performance.

How to find the correct parts for BMW 7 Serie 740 D

Navigate directly to the required component category for the BMW 7 Serie 740 D:

When diagnosing driveline issues, it pays to start in the correct category right away. By comparing the exact part sections for the BMW 7 Serie 740 D, it becomes much easier to identify whether the issue lies with a drive shaft, a CV joint or the propeller shaft, guiding you to the products that match your symptoms and technical specifications.

Finding the exact spare part for a executive saloon like the BMW 7 Serie 740 D requires precise technical details. BMW frequently introduced engineering revisions and supplier updates across production runs, meaning matching your make, model and engine variant is the safest route to a trouble-free installation. At cvjoint24.com, our smart search filters make it simple to select your vehicle details and view the correct car parts immediately. To assist your search, our 740 D range is organised into the following sections:

  • Drive shafts for BMW 7 Serie 740 D
  • Outer CV joints for BMW 7 Serie 740 D
  • Inner CV joints for BMW 7 Serie 740 D
  • Propeller shafts for BMW 7 Serie 740 D
  • Propeller shaft centre bearings for BMW 7 Serie 740 D
Using these targeted categories ensures you order the correct component the first time, giving you complete confidence during fitting.

Why buy from cvjoint24.com

CVJoint24 is the dedicated online shop of a Swedish driveline specialist, focusing exclusively on vehicle drivelines and power transmission components. Because of this singular focus, we offer technical advice, product knowledge and tailored support that general motor factors simply cannot match. When ordering components for your BMW 7 Serie 740 D, you benefit from our guaranteed fitment when selecting your vehicle's make, model and engine specifications. We understand that workshop downtime is costly, which is why all stocked components are dispatched promptly from our central Swedish warehouse across the EU. With our extensive product catalogue, competitive pricing and commitment to engineering precision, cvjoint24.com is the trusted choice for independent garages and DIY mechanics alike. Rely on us for the right part, fast delivery and the dedicated expertise your BMW deserves.

Frequently Asked Questions about the Drivetrain for BMW 7 Serie 740 D

How do I know if my BMW 7 Serie 740 D needs a new drive shaft?

The most common signs are vibrations under acceleration or unusual noises when turning. If you notice the car juddering under load, it is often the inner joint on the drive shaft that has worn out.

Do all CV joints fit every BMW 7 Series model?

No, CV joints vary depending on the engine variant and drivetrain layout (RWD/xDrive). The 740 D often requires reinforced components. Always select your vehicle make, model and engine to find the right part.

What is the difference between an inner and an outer CV joint?

The outer CV joint is located closest to the wheel and allows for steering movement, whilst the inner joint sits closest to the gearbox or differential and primarily absorbs the longitudinal plunge of the drive shaft.

Why does my car vibrate even though the wheels are balanced?

If the vibrations persist, they may be caused by an imbalance in the propeller shaft or a worn centre bearing. On the BMW 740 D, the prop shaft centre bearing is a common cause of speed-dependent vibrations.

Are CV boots included when I buy a CV joint from you?

Yes, when you buy a CV joint from CVJoint24, it is supplied as a complete kit with a CV boot, grease and the necessary fitting accessories to ensure a straightforward replacement.

How quickly can I get the parts for my BMW?

We offer fast delivery on most of our stocked parts for the BMW 7 Serie 740 D, helping you keep your car's downtime to a minimum.