BMW 7 Serie 740 I

Welcome to your dedicated drivetrain specialist for the BMW 7 Serie 740 I. Drawing on our Swedish driveline expertise, we offer a carefully selected range of premium components...

Products for BMW 7 Serie 740 I

4 products
1 - 4 of 4
Item no.:0208491
  • Position: Rear
  • Total length: 1,815 mm
  • Number of joints: 2
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 105 mm
Item no.:417449
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 764 mm
  • Joint diameter: 87,8 mm
Item no.:515337
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 833 mm
  • Joint diameter: 93,8 mm
Item no.:416983
  • Position: Rear left
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 774 mm

Drivetrain for BMW 7 Serie 740 I

The BMW 7 Serie 740 I represents the pinnacle of German engineering, combining potent performance with exceptional comfort. Maintaining this unique driving experience demands a drivetrain in prime condition. The power delivery in a car with this level of engine output handles substantial torque, placing extreme demands on every single component. From the gearbox right through to the wheels, each part must interact with pinpoint precision to eliminate vibrations and ensure silky smooth running.

As driveline specialists, we understand the technical challenges involved in luxury car power transmission. We have brought together the most relevant parts for your exact model so you can carry out servicing and repairs with components that match original equipment specifications. Investing in the correct parts for your BMW is not just about functionality; it also preserves the car’s long-term value and on-road safety.

How the drivetrain is engineered on the BMW 7 Serie 740 I

The layout of the drivetrain on a BMW 7 Serie 740 I follows the brand's classic philosophy: a longitudinally mounted engine paired with rear-wheel drive, or all-wheel drive depending on the configuration. Central to the setup is a long propeller shaft that transfers power from the gearbox to the rear differential. This prop shaft is typically a split design, requiring a sturdy centre bearing to eliminate harmonic vibration and imbalance at speed. Further out towards the wheels, drive shafts handle suspension travel and steering articulation while maintaining efficient power delivery.

Precision across these components is crucial. Because the 740 I is a substantial car with plenty of power, the tolerances within the bearings and joints are exceptionally tight. The slightest play in an inner or outer CV joint can quickly translate into vibrations felt throughout the entire cabin and chassis. By understanding this intricate setup, we can offer components engineered precisely to cope with the severe forces generated under hard acceleration and engine braking in this executive saloon.

Common faults and symptoms

There are several distinct signs that driveline components are nearing the end of their service life. One of the most typical symptoms of a worn drive shaft on the BMW 7 Serie 740 I is a clicking or popping noise when negotiating tight turns, which usually points to a failing outer CV joint. If you experience noticeable vibrations under heavy acceleration instead, it often indicates wear or play developing in the inner CV joint closest to the gearbox.

When it comes to the propeller shaft, the symptoms can be subtler yet just as noticeable. A high-pitched whining noise or a thrumming vibration that intensifies with vehicle speed, irrespective of engine revs, regularly points to a worn centre bearing or prop shaft imbalance. It is vital to tackle these issues promptly, as a defective propeller shaft can cause knock-on damage to both the gearbox and the differential. Regular inspection of every CV boot is also essential; a split boot quickly allows road grime in and flushes grease out, destroying the precision-machined bearing surfaces.

Common parts to replace on the BMW 7 Serie 740 I

For the BMW 7 Serie 740 I, we have identified the primary components that most commonly require renewal over the vehicle's lifespan. Our range is tailored specifically to meet these demands with optimal precision. Below are the key categories for your vehicle:

  • Drive shafts for BMW 7 Serie 740 I
  • Propeller shafts for BMW 7 Serie 740 I
  • Propeller shaft centre bearings for BMW 7 Serie 740 I

These parts have been chosen to satisfy the strict requirements for tensile strength, balance, and fatigue resistance demanded by the 740 I. Whether you are carrying out a complete driveshaft replacement or preventive maintenance on a centre bearing, you can rely on our components to perform. We ensure you get the exact specification needed to achieve a successful repair the first time around.

How to find the correct part for your BMW 7 Serie 740 I

Navigate directly to the right category for your BMW 7 Serie 740 I:

On a vehicle with several interrelated driveline parts, it pays to start in the correct section immediately. By comparing the exact component sections for the BMW 7 Serie 740 I, it is straightforward to differentiate between drive shaft, CV joint, or prop shaft faults and proceed to the page that best matches your symptoms and fitment needs.

Selecting the right spare part for an advanced vehicle like the BMW 7 Serie might seem daunting, but we have made the entire process straightforward and reliable. The most dependable way to ensure correct fitment is to select your car's make, model, and engine variant. Filtering our catalogue this way displays only the parts engineered specifically for your BMW 7 Serie 740 I, guaranteeing you receive the correct replacement without guesswork.

Once you have located the relevant category, we also recommend checking the technical specifications and dimensions detailed on the product page. With our fitment guarantee, you can order with absolute confidence. If you need any assistance clarifying which variant matches your car, our knowledgeable customer support team is always ready to help. Our objective is to ensure you receive the right product delivered straight to your door without fuss.

Why shop with CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders across the EU from our central warehouse in Helsingborg, Sweden. We combine in-depth technical expertise with a comprehensive inventory that few general motor factors can match. When you order from us, you get premium car parts thoroughly tested to endure harsh European roads, changing climates, and the exacting demands of high-performance models like the BMW 7 Serie 740 I. Because we focus exclusively on driveline technology, we provide unmatched specialist knowledge.

We recognise how crucial it is to get your vehicle back on the road without delay. That is why we provide swift dispatch on our stocked product lines. Supported by our fitment guarantee and straightforward returns process, purchasing your replacement parts is simple and risk-free. Choosing CVJoint24 means choosing proven quality, prompt European delivery, and specialised advice every step of the way. Rely on us for your next repair and experience the difference of dealing with dedicated driveline experts.

Frequently Asked Questions about Drivetrain for BMW 7 Series 740 i

Which drivetrain parts are most commonly replaced on a BMW 740 i?

The most common parts that need replacing are drive shafts, propeller shafts and centre bearings. Due to the car's high torque output, these components wear out faster than on less powerful models.

How do I know if my centre bearing is worn out?

A worn centre bearing often causes body vibrations or a whining noise that is most noticeable at certain speeds, typically between 50 and 80 km/h.

Do all propeller shafts fit every 7 Series model?

No, propeller shafts differ depending on engine variant, gearbox and whether the car has a short or long wheelbase. Always select your car's make, model and engine to find the correct prop shaft for your 740 i.

Why is it important to fit the correct drive shaft to a 740 i?

The 740 i has a powerful engine that demands heavy-duty drive shafts with high tensile strength. Incorrect or undersized components can lead to premature failure or imbalance.

How do I find parts that fit my car?

Yes, using our vehicle search by selecting your exact make, model and engine is the most reliable way to filter for the parts that fit your specific BMW 7 Series 740 i.

How quickly are the parts delivered?

We offer fast delivery across Europe for the majority of our products, provided they are in stock at the time of your order.