BMW 7 Serie 745 I LI

Spare parts and drivetrain components for BMW 7 Serie 745 I LI. Confirm fitment by make, model and engine before ordering.

Products for BMW 7 Serie 745 I LI

8 products
1 - 8 of 8
Item no.:6172510
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 651 mm
  • Joint diameter: 94 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:0283827
  • Total length: 1,703 mm
  • Number of joints: 2
  • Outer diameter 1: 100 mm
  • Bolt circle diameter 1: 86 mm
  • Outer diameter 2: 14 mm
Item no.:0254840
  • Total length: 1,845 mm
  • Number of joints: 3
  • Outer diameter 1: 100 mm
  • Bolt circle diameter 1: 86 mm
  • Outer diameter 2: 14 mm
Item no.:0292490
  • Position: Rear
  • Total length: 1,699 mm
  • Number of joints: 2
  • Outer diameter 1: 99,5 mm
  • Bolt circle diameter 1: 86 mm
Item no.:6201208
  • Position: Rear
  • Total length: 1,836 mm
  • Number of joints: 2
  • Outer diameter 1: 99,5 mm
  • Bolt circle diameter 1: 86 mm
Item no.:315173
  • Splines gearbox side: 32
  • Outer diameter: 100 mm
  • ABS teeth: 32
Item no.:613846
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 657 mm
  • Flange diameter: 108 mm
  • ABS teeth: 48

Drivetrain for BMW 7 Serie 745 I LI

The BMW 7 Serie 745 I LI represents the pinnacle of German engineering and luxury, where power transmission plays a crucial role in delivering a silky-smooth driving experience. The drivetrain in this model is engineered to handle substantial torque from the powerful V8 engine, placing extremely high demands on every single component. From the gearbox via the propeller shaft out to the drive shafts, every link in the chain must operate flawlessly to maintain the car's dynamic characteristics. At CVJoint24, you will find the specific parts required to service and repair your BMW 7 Serie with absolute precision. We understand that owners of a 745 I LI settle for nothing less than perfection, which is why we focus exclusively on parts that meet or exceed original equipment specifications. By proactively inspecting your car's drivetrain, you can avoid costly secondary damage and ensure that your BMW continues to deliver the refined comfort and performance it is renowned for.

How the drivetrain is engineered on the BMW 7 Serie 745 I LI

The layout of the drivetrain on a BMW 7 Serie 745 I LI is a complex system designed for optimal weight distribution and power delivery. As a rear-wheel-drive luxury saloon, the 745 I LI relies on a robust prop shaft running down the centre of the vehicle to transmit power from the front-mounted engine to the rear axle. This propeller shaft is typically split into multiple sections with centre bearings and flexible couplings (guibo discs) to minimise vibrations and cabin noise levels. At the rear axle, power is distributed via the differential to the wheels through two precision-engineered drive shafts. Because the 745 I LI often features an extended wheelbase, particularly in the long-wheelbase Li variant, prop shaft balancing and centre bearing condition are critical to prevent resonance at higher road speeds. Every component is dimensioned to handle the vehicle's weight and rapid acceleration, making the selection of high-quality replacement parts a technical priority to retain the car's original character.

Common faults and symptoms

Despite the exceptional build quality of the BMW 7 Serie 745 I LI, drivetrain components will inevitably suffer wear over time, especially given the vehicle's substantial weight and power output. One of the most common symptoms of a failing propeller shaft on a BMW 7 Serie 745 I LI is vibration felt through the body shell or the driver's seat, often within specific speed ranges. If these vibrations intensify under acceleration, it typically points to an imbalance or worn universal joints in the shaft. For the drive shafts, the most frequent sign of trouble is a distinct clicking noise when navigating tight corners, which usually stems from a worn outer CV joint, or shuddering under acceleration indicating inner joint wear. It is also vital to inspect CV boots for splits or grease leaks; once grease escapes, the constant velocity joints wear out in very short order. Unusual noises such as grinding or whining from the rear axle can also signal bearing or differential issues, requiring immediate attention to prevent total failure and costly garage repairs.

Common components to replace on the BMW 7 Serie 745 I LI

When maintaining or repairing a BMW 7 Serie 745 I LI, certain driveline parts are more prone to wear and require replacement to preserve reliability and ride comfort. In our range for this model, you will find essential components for the transmission of power. We supply:

  • Drive shaft for BMW 7 Serie 745 I LI: Complete driveshafts ensuring vibration-free power delivery to the rear wheels, engineered to withstand high torque loads.
  • Propeller shaft for BMW 7 Serie 745 I LI: We provide several prop shaft variants, essential as the 745 I LI requires specific lengths depending on chassis number and gearbox specification.
  • Centre bearings and flexible couplings: Crucial for absorbing torsional forces between the engine and rear axle, preventing unwanted cabin vibrations.
With five distinct propeller shaft options listed for this specific model variant, selecting the correct replacement requires technical precision. Replacing a fatigued prop shaft with a fresh, balanced unit often restores that factory-fresh, whisper-quiet driving feel to an older 7 Series.

Finding the right part for your BMW 7 Serie 745 I LI

Navigate directly to the appropriate section for your BMW 7 Serie 745 I LI:

On a vehicle with several potential drivetrain issues, it is sensible to start in the correct category straight away. By comparing the dedicated component sections for the BMW 7 Serie 745 I LI, it becomes much easier to distinguish between faults in a drive shaft, CV joint or propeller shaft, taking you directly to the parts matching your symptoms and fitment.

Locating the exact spare part for an advanced vehicle like the BMW 7 Serie 745 I LI can seem daunting, but we have made the process straightforward for our customers. Simply select your car's exact make, model and engine variant in our catalogue to filter out the components verified to match your model year and chassis configuration. For the 745 I LI, this step is particularly crucial, as differences between standard and long-wheelbase variants often result in differing propeller shaft lengths. Here are the categories available for your vehicle:

  • Drive shaft - For smooth, efficient power transmission to the driven wheels.
  • Propeller shaft - The central shaft engineered for precise rear-wheel-drive performance.
Navigating through these links takes you straight to our dedicated range for your BMW, where you can verify specifications and view live stock levels to pick the correct part first time.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, supplying high-grade drivetrain and power transmission components from our warehouse in Helsingborg, Sweden across the entire EU. We set ourselves apart from general auto factors through our deep technical know-how and our specialised product range, covering everything from CV joints and driveshafts to prop shafts. When ordering parts for your BMW 7 Serie 745 I LI from us, you can shop with confidence knowing our components are built to precise OEM specifications. We understand the urgency of getting your car back on the road, which is why we dispatch promptly across Europe. Our ethos centres on supplying the right part at competitive prices, without ever compromising on material quality or durability. As our customer, you gain access to trade-level expertise combined with dedicated customer support that truly understands driveline systems. Choose a specialist that appreciates the technical nuances of your vehicle – choose CVJoint24 for a dependable, straightforward purchase every time.

Frequently Asked Questions about Drivetrain Parts for BMW 7 Series 745 I LI

How do I know if my BMW 745 I LI needs a new propeller shaft?

Common signs include vibrations through the body during acceleration or at speeds above 80 km/h, as well as unusual noises from underneath the vehicle that can indicate worn universal joints or imbalance.

Is there a difference in drive shafts between the 745 I and 745 LI?

The drive shafts at the wheels are often the same, but the propeller shaft almost always differs in length due to the extended wheelbase on the LI model compared to the standard model.

Can I replace just the CV joint, or do I need to replace the complete drive shaft?

On many BMW models, it is most cost-effective and dependable to replace the complete drive shaft to ensure long-term reliability, but we provide the options that best suit your car's requirements.

What is included in the fitment guarantee at CVJoint24?

When you select your car's exact make, model and engine variant, we guarantee that the recommended part fits your BMW 745 I LI. If it does not fit, we help you find the correct part at no extra cost.

How quickly are spare parts delivered for my BMW?

We dispatch quickly across Europe so that your BMW 7 Series is not left off the road longer than necessary due to worn or damaged driveline parts.

Why are there several different propeller shafts for my 745 I LI?

BMW used different configurations depending on production month, gearbox and equipment specifications. By choosing your exact model details, our catalogue identifies which of the available prop shafts fits your car.