BMW X3 3.0 D E83

Spare parts and drivetrain components for BMW X3 3.0 D E83. Check fitment by make, model and engine before ordering.

Products for BMW X3 3.0 D E83

40 products
25 - 40 of 40
Item no.:694294
  • Position: Rear
Item no.:696570
  • Position: Rear
Item no.:0677462
  • Position: Front
Item no.:0510473
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 65 mm
  • Outer splines: 30
  • Thread size: M22X1,5
Item no.:0296958
  • Total length: 702 mm
  • Outer diameter 1: 47 mm
  • Bolt circle diameter 1: 84 mm
  • Outer diameter 2: 47 mm
  • Bolt circle diameter 2: 84 mm
Item no.:646444
  • Position: Rear, Inner
  • Inner splines: 25
  • Total length: 26 mm
Item no.:242993
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 949 mm
  • Joint diameter: 82 mm
Item no.:694348
  • Position: Rear
Item no.:325885
  • Position: Front
  • Total length: 702 mm
Item no.:415721
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 645 mm
  • Joint diameter: 88 mm
  • ABS teeth: 48
Item no.:626952
  • Position: Rear
  • Total length: 1,128 mm
Showing 25–40 of 40 products

Drivetrain for BMW X3 3.0 D E83

The BMW X3 3.0 D E83 is a powerful machine where the drivetrain plays a crucial role in managing the high torque generated by its six-cylinder diesel engine. The power transmission system in this model is engineered to provide both stability and off-road capability, but these heavy demands mean components such as drive shafts and propeller shafts will eventually require attention. Here at CVJoint24, you will find a dedicated range of components tailored specifically for this engine variant. Choosing the correct parts is vital to preserving the driving pleasure and safety that BMW is renowned for. We focus on providing parts that match or exceed original equipment specifications, ensuring lasting durability even under demanding driving conditions. By understanding the unique requirements of the E83 platform, we help you find exactly what you need for your repair. Our dedication to quality makes us the preferred choice for BMW owners across Europe looking for dependable power transmission solutions.

How the drivetrain is engineered on the BMW X3 3.0 D E83

The layout of the drivetrain on a BMW X3 3.0 D E83 centres on the intelligent xDrive all-wheel drive system. This setup divides torque between the front and rear axles via a transfer case. From the transfer case, a front and a rear propeller shaft run to their respective differentials. The differentials then transfer the power outwards to the wheels via the drive shafts. This complex sequence of parts requires every single link to perform seamlessly to prevent vibrations and power loss. In particular, the front prop shaft is a known weak spot prone to wear owing to its location and operating angle. The driveshafts, in turn, feature constant velocity joints that accommodate suspension travel as well as steering angles. Understanding this flow of power is essential when diagnosing the source of an unusual noise or vibration, as each component has a defined role in the drivetrain that influences the vehicle's overall handling.

Common faults and symptoms

Symptoms of a failing drivetrain on a BMW X3 3.0 D E83 vary depending on which component is worn. One of the most typical signs is vibrations felt through the bodywork during acceleration or at specific road speeds, which frequently points to imbalance or worn universal joints in a prop shaft. If you hear a rhythmic clicking noise on full steering lock, an outer CV joint is usually failing, often caused by a split CV boot that has let in road dirt and allowed the grease to escape. Another common issue on the E83 model is error messages from the ABS or stability control systems, commonly triggered by a corroded or cracked ABS reluctor ring interfering with the wheel speed sensor. By acting on these early warning signs, you can prevent far more expensive consequential damage to the transfer case or differentials, saving both time and money in the long run.

Common parts to replace on the BMW X3 3.0 D E83

For the BMW X3 3.0 D E83, we have identified the key components that most frequently need replacement over the vehicle's lifespan to maintain reliability. Our range includes seven different propeller shaft options, covering both front and rear positions to effectively eliminate drivetrain vibrations. We also supply five specific drive shafts to cater for front and rear axle requirements. Alongside these major assemblies, we provide outer CV joints to resolve clicking noises while cornering, as well as precision ABS rings needed to restore full braking and stability control functionality. These parts are selected to withstand the demands of the 3.0-litre diesel engine, where torque loads are significantly higher than on smaller petrol models. Replacing worn components with correctly specified new parts is the best way to safeguard long-term vehicle performance and prevent unexpected breakdowns.

Finding the right part for your BMW X3 3.0 D E83

Proceed to the relevant section for your BMW X3 3.0 D E83:

On a vehicle with several possible drivetrain issues, it pays to start directly in the appropriate category. By comparing the specific sections for the BMW X3 3.0 D E83, it becomes straightforward to distinguish between faults in a drive shaft, CV joint or propeller shaft, taking you directly to the parts that match your symptoms and technical requirements.

Identifying the right spare part for a BMW X3 3.0 D E83 can sometimes be tricky due to minor production revisions and variations across equipment levels. The most reliable way to ensure an exact fit is to filter by your car's make, model and engine variant. This brings up the products technically verified for your specific vehicle. The following categories are available for your model:

  • Drive shafts for BMW X3 3.0 D E83
  • Propeller shafts for BMW X3 3.0 D E83
  • Outer CV joints for BMW X3 3.0 D E83
  • ABS rings for BMW X3 3.0 D E83
When selecting a part, it is also good practice to verify key technical specifications, such as overall length and spline count, whenever detailed in the product description. At CVJoint24, we put extensive care into matching our catalogue against accurate vehicle data to minimise the risk of incorrect orders. If you need any assistance, our technical experts are on hand to guide you, giving you full peace of mind that the part you receive will fit perfectly during installation.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish specialist in All car makes drivetrain and power transmission components. Unlike general car parts retailers, we focus intently on these driveline categories, allowing us to provide unmatched product knowledge and support for your BMW X3. When you purchase from us, you benefit from our accurate fitment commitment, ensuring the part matches your BMW X3 3.0 D E83 when chosen according to make, model and engine details. We know how essential your vehicle is to your routine, so our stock is dispatched rapidly from our central Swedish warehouse to get your repair finished without delay. Our goal is always to deliver the right part first time. By combining premium-grade components with specialist technical advice and fast logistics across the EU, we are the trusted partner for DIY mechanics and professional garages looking for dependable drivetrain parts.

Frequently asked questions about Drivetrain for BMW X3 3.0 D E83

What are the most common drivetrain problems on the BMW X3 E83 3.0 D?

The most common issues include vibrations from the propeller shaft, worn outer CV joints that click when turning, and cracked ABS rings that trigger fault codes in the braking system.

How do I know if my propeller shaft needs replacing?

Typical signs are vibrations through the car during acceleration or a thumping noise from underneath the vehicle. This is often caused by a worn centre bearing or universal joint, which unbalances the prop shaft.

Do all drive shafts fit every BMW X3 model?

No, drive shafts vary depending on the engine variant, gearbox and model year. For the 3.0 D E83, components must be dimensioned to cope with the engine's high torque output.

Why does the ABS ring fail on the BMW X3?

The ABS ring is exposed to dirt and moisture. Over time, rust builds up beneath the ring, causing it to crack or expand so the sensor can no longer read the signal correctly.

Can I replace just the CV joint, or do I need to replace the complete drive shaft?

On the BMW X3 3.0 D E83, you can often replace the outer CV joint separately if the shaft itself is undamaged, which is a very cost-effective alternative to replacing the complete driveshaft.

How does the fitment guarantee work at CVJoint24?

When you select your car's exact make, model and engine, we match the parts to your specific vehicle. In the unlikely event that a part does not fit, we will help you find the correct one or refund your money.